Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Model Years
- Show Fewer Model Years
Racks
$35.00 - $116.75
Wald bicycle racks offer a simple rear rack design for easy use. Lightweight, yet sturdy construction with simple mounting points located at eyelets near the rear axle and the brake mount. The 215 works perfectly with Wald's innovative 582 rear folding basket.
- Simple design for easy use
- Lightweight, yet sturdy
- Steel rack w/adjustable brake bolt mount
- Loading surface = 13" x 5"
- Lightweight at just over 2 pounds
- Specifically designed for 29" mountain bikes and larger volume 700C wheels
- Compatible with bike frames equipped with disc brakes
- Tubular aluminum rear rack for loaded touring
- MTX 2.0 QuickTrack compatible with all MTX Trunk Bags or MTX rear baskets
- 6061 T-6 hollow aluminum
- 55lb weight capacity
- 680g
- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags
- Integrated fender top
- 6061 T6 alloy construction
- To be mounted on bikes with disc brakes
- 625g
- 55lb weight capacity
- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags
- Integrated fender top
- 6061-T6 alloy construction
- Spring clip for additional cargo security
- Designed for compatibility with disc brakes
- 800g
- 55lb weight capacity
$119.95
The perfect quick-mount front rack system for MTB suspension forks or rigid forks without rack eyelets. This one-size-fits-all front rack features an innovative top plate that adjusts to levels independently from the fork angle. Integrated QuickTrack system allows Topeak TrunkBags to slide and lock into place and release with a the push of a button. Innovative hook-and-loop-strap mounting system cinches down tight to keep the load stable and allows mounting on a wide range of bikes. Also compatible with KLICKfix / RackTime Snapit or Vario system bags.
- Attachments: Fork with hook-and-loop straps
- Adjustment: Strut slots
- Material: Aluminum / Engineering grade polymer / Nylon straps
- Compatibility: Topeak MTX / RX TrunkBags, RackTime Snapit / Vario system bags
- Max Load: 10kg / 22lb
- Clamp for front reflector
- Size: 37. 4 x 32.2 x 16.5cm / 14.7" x 12.7" x 6.5"
- Weight: 910g / 2.01lb
This one-size-fits-all aluminum tubular rear rack is designed exclusively for Fat Bikes with disc brakes. The rack legs are adjustable to fit most 24” & 26” wheel Fat Bikes. The integrated side bar provides a lower pannier attachment point allowing more space for cargo on top of the rack. The MTX QuickTrack plate is compatible with any Topeak MTX TrunkBag, MTX rear basket, and most other rack packs and panniers on the market. Not compatible with asymmetric rearstay design fat bike frames.
The Salsa EXP Series Anything Cage HD is a unique cargo mounting system that allows you to carry lightweight gear or large bottles on forks and down tubes that have Three-Pack mounts.
- Versatile system designed for the Salsa Anything Cage Bag with EXP Series Rubber Straps (included) or nylon EXP Series Anything Cradle Straps
- Constructed with glass-filled nylon for strength and durability
- Holds gear low on fork blades or down tubes with Three-Pack mounts
- Includes Anything Cage HD with hardware, Anything Cage Bag, and two 20" Salsa EXP Rubber Straps
- Maximum load: 6.6 lb (3kg)
Planet Bike's Eco Rack is made of oversize tubular 6061-aluminum for maximum strength and stability. It's designed to provide complete heel clearance when you install packs. And, the pre-installed rack hardware makes it a cinch to mount the Eco Rack to your bike, too. This rack fits most road, mountain and hybrid bicycles and even includes a built-in platform, which doubles as a mini-fender on rainy rides.
$39.99 - $49.99
Electra's sleek Amsterdam Alloy Rear Rack extends the beautiful lines of your bike while adding space to carry things. It features a sturdy design and attaches easily so you can bring along nearly anything your heart desires.
Give the front of your Ponto Go! an upgrade with this tray.
- Made with 67% recycled fishing nets
- Colors may vary due to recycled materials
- Reflective bungee net included
- Designed to securely carry a ball
- Attaches to the Ponto Go! Headtube
- Includes attachment hardware
$49.99
Denago Commute Rear Rack FITS ONLY SM/MD Top Tube or Step-Thru. Custom design and fit. Easy to mount and use! Other racks for other sizes.
COMPATIBLE ONLY with COMMUTE E13/18 SM/MD frame size
Built for quick trips around town, the Blackburn Bootlegger Rack will turn your bike into an errand-running machine. The porteur style Bootlegger is constructed of T-6061 aluminum, has a stamped top deck, and features Blackburn universal mounting for easy installation. The top deck also has the perfect dimensions for a case of your preferred cold beverage.
- Universal swivel mounting hardware allows mounting on most adult bikes
- Robust legs attach to the frame, providing increased loading capacity
- Horizontal leg loop for cargo strap hook
- For tire sizes 26", 650B, 700c, 27.5", and 29" and widths from 23c to 3"
- Disc brake compatible
- Light clip attachment
- Includes cargo net
- Integrated bottle opener
- 45lbs/20.5kg capacity
- Weight: 917g
The Grid 1 is your basic do it all rack that will carry many sizes and styles of panniers. It also mounts in seconds because all of the hardware comes pre-installed. Great for commuters and students.
- Performs great with trunk bags
- Light and reflector mounting loop
- 45lb / 20.5kg capacity
A harmonious marriage of two classic Blackburn products: a cargo rack and bottle cage in one. Blackburn's Outpost Cargo Cage provides a solution to carrying your oddly-shaped gear along for the ride.
- Securely strap down odd size bottles and other gear, such as bags and clothing
- Mounts to 2 standard bottle cage bosses
- Three sets of mounting holes to fit different size frames
- Included silicone-backed webbing straps prevents your cargo from jostling free
- 6mm alloy tube construction
- 4kgs/8.8lbs carrying capacity
- Weight: 164 grams w/ straps
$124.95
Made of high-grade aluminum, the Outpost Rear World Touring Rack is one of the lightest of its kind. The weight savings does not mean that we sacrifice ease of installation, fit, or the stability that is gained from low rider mounting.
Universal Fit System
This rack offers more fitment flexibility than other systems, to fit more bikes. That's less time wasted during installation futzing with extra hardware or custom-fitting the mounts.
Height Adjustable
Adjustable height design works with most road and mountain bike hub and tire widths, without having to twist or bend anything
Lightweight
Constructed of T6061 aluminum, this product is both lightweight and strong.
Lifetime warranty
$165.00
The VO Porteur Rack is a traditional-style rack as used on the famed Parisian newspaper delivery bikes. Those Parisian delivery bikes were reputed to carry as much as 110lbs. of newspapers on similar racks (of course, the bikes had strengthened frames and forks, not just racks).
Our Porteur Rack is made from strong stainless steel tubing and polished to a lovely shine. It won't rust like painted steel racks or fatigue and crack like aluminum racks. The quality is actually superior to that of many custom racks. In short, this is a real load-carrying rack, not an aluminum "style-rack". Yet total weight with rail, nuts, bolts, etc. is only 1.079kg.
The platform is about 36cm x 29cm. A removable rail attachment is included and very handy for smaller packages.
The tangs are pre-drilled to fit 700c, 27", 26", and 650b bikes. There are four bosses for a light attachment. There is a boss for securing your fender to the rack -- no rattling! Please also note the elegant pannier/tie-down loops above the mounting tangs.
Mounting hardware is included. The Porteur Rack mounts to the dropout eyelet and the brake bolt (or fork crown hole). Max weight with this configuration is 25 lbs.
$7.00
These are simple polished stainless steel struts which can be used to mount many of our racks to your bike's brake bridge or fork crown. Available in Small and Large sizes.
- Small is 8.5cm long from end to end
- Useful for mounting our Constructeur Rear Rack to your brake bridge.
- Useful for mounting our Constructeur Rear Rack to your brake bridge. Also used for mounting our Randonneur, Constructeur Front, and Porteur Racks to your bike's fork crown.
- Note: not required if you mount the rack to metal fenders, as is traditional.
$470.00
With the Airy, Tubus introduces the first carrier made of titanium. With a maximum load of 30 kilos and a weight of 233 grams, the tubus Airy breaks every record. Titanium is a very difficult material to work with since it can only be cut and processed with special tools and machinery. The material titanium is extremely corrosion resistant and strong, which makes the Airy carrier nearly indestructible.
ADDITIONAL FEATURES:
Weight: 281g/9.9oz
Carrying Capacity: 30kg/66lbs.
$200.00
Our classic model—on the road around the world since 1988. This model is the basis for all of our rear carriers. CARGO has been tested and loved by its owners in tough daily routine since 30 years. CARGO is our all-round happy solution for transporting luggage on the bike. CARGO is good for your daily ride or as packhorse for your next world tour. It fits most bikes and carries most panniers.
- Material: 25CrMo4
- Weight: 740 g | 26.1 oz (28'')
- Loading Capacity: 26 kg (tested with 40 kg | 88 lbs)
- Diameter: 10 mm | 0.4 in
$200.00
The most tried and tested all-round carrier updated for today’s challenges: 3D feet with perfect force absorption and integrated screw attachment. Comfortable mounting parts for mounting the stays to the frame. Including protection of tail light. If required, a spring clamp can be clicked onto the carrier. Armed for the next tour.
- Material: 25CrMo4
- Weight: 780 g | 27.5 oz (28'')
- Loading Capacity: 26 kg | 57.3 lbs (tested with 40 kg | 88 lbs*)
- 10 mm | 0.4 in
$210.00
The COSMO is the flagship model for stainless steel Tubus carriers. It has a wider cargo area, extreme carrying capacity, and a longer back for better tail light protection.
- Weight: 680g or 24 oz.
- Load Capacity is 40kg or 88 lbs.
- Wheel size 26? or 700c
$150.00 - $185.00
So, you have disc brakes, and only the best is good enough for you. Now, you can mount a Tubus carrier on your bike. Their Disco is designed to be combined with disc brakes. Instead of using added accessories, the Disco simply fits onto your frame. The carrier is easy to mount using the included quick release, or it can also be mounted on eyelets of the frame. Simply load up your bike and go.
- Includes QR Skewer
$140.00
If your fork has inside and outside eyelets, then the DUO is your right choice. Just as the TARA, DUO tolerates extreme loads and almost all panniers. It also features a longitudinal hole for optimal fit and increased flexibility.
Not suitable for mounting on spring or carbon forks without eyelets. The fork must be approved by the manufacturer, or by the bicycle manufacturer for mounting a carrier. There must be no crimping.
- Material: 25CrMo4
- Size: 26" | 28"
- Weight: 560 g | 19.8 oz
- Loading Capacity: 15 kg | 33.1 lbs
- Diameter: 14 / 10 mm | 0.6 / 0.4 in
$185.00
The Tubus Fly is made of two stainless-steel tubes, making it the purist in the lightweight class. This 369-gram masterpiece carries 18 kilograms of luggage, making this model one of the most efficient racks available. With the Fly, optical pleasure and high function work in perfect harmony.
$270.00
Low or high rider? Just take both! tubus presents the first combi-carrier that combines the properties of both systems: Lateral driving stability thanks to the low center of gravity, with space on top for bulky items such as a sleeping pad and sleeping bag. With the GRAND EXPEDITION FRONT for the front, you don't have to make any compromises when transporting luggage. This is tube.
Not suitable for mounting on spring or carbon forks without eyelets. The fork must be approved by the manufacturer or the bicycle manufacturer for mounting a luggage rack. There must be no squeeze connections.
$255.00
The GRAND TOUR has what it takes to become a new tubus classic! With its narrow but functional loading area, it combines stability and extreme rigidity with a discreet appearance. The luggage carrier feet are reduced and designed as a minimalist tube construction.
The GRAND TOUR packs the 26 kg payload with ease, making it almost indispensable on modern touring bikes. It provides faithful service thanks to its second loading level and the option of using a tensioning strap both lengthwise and crosswise.
$185.00
Made for traveling: The top rail is designed extremely narrow, still offering enough space to fit a tent, mattress and sleeping bag. Your panniers are mounted one level down. This lowers the center of gravity and improves the riding stability of your bike. In combination with TARA our LOGO models make the ultimate dream team for long-distance traveling. The LOGO also fits on particularly short frames.
- Material: 25CrMo4
- Size: 26'' | 28'
- Weight: 800g | 28.2 oz (26" | 28")
- Loading Capacity: 26 kg | 57.3 lbs
- Diameter: 10mm | 0.4 in
$200.00
The travel-master Logo has been updated with 3-D feet with perfect force absorption and an integrated screw attachment. The super-light mounting parts for mounting the stays to the frame and klick spring clamp as well. The Evo has the typical lower rail of the Logo classic, lowering the center of gravity and improving the riding stability.
- Weight: 730g/1.6 pounds
- Carrying Capacity: 40kg/88 pounds
Page 1 of 4
Next page