Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Crank Bros

Crank Brothers Mallet DH/Race
$135.00
Whether you're in the heat of a race, or just sessioning your local trails, give yourself an advantage with Crank Brothers' Mallet DH pedals. They rock super easy-to-enter/exit 4-sided cages with wide aluminum platforms for serious support. Steel springs, steel wings and chromoly axles deliver DH-worthy durability that shrug off hard use and big hits. The open design quickly sheds mud for reliability in sloppy conditions and the eight adjustable traction pins per side grip well when you're riding clipped out in corners.
Crank Brothers m19
$30.59 - $33.99
The ultimate trailside companion. These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on. The m19 includes: - Chain tool: 8/9/10 speed compatible - Spoke wrench: #0, 1, 2, 3 - Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8 - Open wrench: 8mm, 10mm - Screwdrivers: Phillips #1, Phillips #2, flat #2 - Torx: t-10, t-25 - Stainless steel carrying case - Length: 89 mm - Weight: 175g - Warranty: lifetime
Crank Brothers Mallet 3
$135.00
Crank Brothers' Mallet 3 pedals sport the company's super easy-to-enter/exit 4-sided cages with wide aluminum/polycarbonate platforms for stellar support and stability, as well as tough chromoly axles with steel wings for durability, making these great pedals ideal for downhill riding and free riding. The open design quickly sheds mud for reliability in sloppy conditions and the traction pins grip well when you're riding clipped out between corners.
Crank Brothers Candy 3
$135.00
Crank Brothers' Candy 3 pedals combine 4-sided cages for super-easy entry/exit with CNC'd aluminum platforms for low weight, great foot stability, and on-trail durability. The Candy 3s feature chromoly axles, stainless steel springs, CNC machined aluminum wings, and an open design that sheds mud fast, making them ideal for sloppy conditions and cyclocross. They're also enhanced with inner needle bearings and water-tight internals for consistently smooth pedaling.
Crank Brothers Candy 1
$55.00
Crankbrothers' most versatile pedal. The Candy excels at it all – cyclocross, XC, trail, all mountain. 4-sided entry enables superior mud shedding capability, and customizable float and release angles create a dialed-in feel. Spindle material: Forged scm 435 chromoly steel Body material: One piece composite Wing material: Stamped steel Spring material: 300 series stainless steel Release angle: 15° / 20° Q-factor: 52mm Inner bearing type: Igus LL-glide bearing Outer bearing type: Enduro cartridge bearing Cleat: Premium brass cleats with shims included Weight: 294g per pair Warranty: 5 years
Crank Brothers Candy 1
$59.99
Crank Brothers' most versatile pedal. The Candy excels at it all – cyclocross, XC, trail, all mountain. 4-sided entry enables superior mud-shedding capability, and customizable float and release angles create a dialed-in feel. - Spindle material: Forged scm 435 chromoly steel - Body material: One piece composite - Wing material: Stamped steel - Spring material: 300 series stainless steel - Release angle: 15° / 20° - Q-factor: 52mm - Inner bearing type: Igus LL-glide bearing - Outer bearing type: Enduro cartridge bearing - Cleat: Premium brass cleats with shims included - Weight: 294g per pair - Warranty: 5 years
Crank Brothers Double Shot 2 Pedals
$80.00
You've got flat shoes and shoes with cleats. Are you really gonna let your pedals tell you which ones you can wear? Crank Brothers' hybrid-style Double Shot is a flat and clipless pedal to suit your every pedaling whim. Molded pins and ribs offer superior grip, and diamond plate pads are supremely tactile. You've got entry from either side of the pedal, so that's two chances per revolution to catch. Thanks to the wide, platform-style body, though, you'll keep moving even if you don't. Specifications: - spindle material: forged scm 435 chromoly steel - body material: A380 aluminum - wing material: 17-4PH stainless - spring material: 300 series stainless steel - release angle: 15° / 20° - q-factor: 52mm - inner bearing type: igus LL-glide bearing - outer bearing type: enduro cartridge bearing - cleat: premium brass cleats with shims included - weight: 395g per pair
Crank Brothers Opium 3 Wheelset 29-inch
$750.00
Elite-level aluminum wheels for DH/freeride. Massively different: simple and beautiful, the unique wheel design is based around principles of strength, stiffness and acceleration. Faster to accelerate: low rotational inertia. Unique wheel design distributes mass closer to the hub for faster acceleration and deceleration. Tubeless-ready, hole-less rims: stronger and no rim tape required for tubeless setup. Stronger and stiffer: Twinpair spoke technology. Designed using the strongest shape in construction, the triangle, to maximize strength and stiffness. Beautifully simple, single spoke length: easy to true and replaceable without removing tire.
Crank Brothers m17
$28.00
The ultimate trailside companion. These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on. The m17 includes: Chain tool: 8/9/10 speed compatible Spoke wrench: #0, 1, 2, 3 Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8 Open wrench: 8mm, 10mm Screwdrivers: Phillips #2, flat #2 Torx: t-25 Length: 89 mm Weight: 168g Warranty: Lifetime
Crank Brothers 5050
$59.99 - $70.00
Crank Brothers steps up to the plate to provide downhillers, freeriders, and BMXers with one sweet platform pedal. Most flat pedals have the traction pins' hex holes on top, making them very difficult to remove if they break or are worn down. The 5050s have removable plates so you have full freedom to customize pin location for rider preference and terrain. Additionally, this puts the pin's hex-hole location on the back of the plates, making them easy to remove after heavy duty use. The 5050 pedals are crafted from 6061-aluminum and utilize a bushing and cartridge bearing system that is completely user-serviceable.
Crank Brothers B14-Bit Multi-Tool
$25.19
Crank Brothers' B14-Bit Multi-Tool has a stainless steel frame with fourteen common tools needed for road and trail repairs: 2 flat and 2 Phillips screwdrivers, 1.5, 2, 2.5, 3, 4, 5, 6, and 8mm Allen wrenches, and a T10 and a T25 Torx head. It uses a magnetized bit socket that keeps the bit firmly in place. The bit holder locks closed, so everything's there when you need it!
Crank Brothers Cobalt 11 Handlebar
$144.00
The Crank Brothers Cobalt 11 Handlebar is the perfect weight-saving, stiffness-enhancing upgrade for your prized bike! It's constructed from high modulus carbon for an unreal stiffness-to-weight ratio and the choice of 8 or 15mm of rise lets you find the ideal position for climbing up and ripping down.
Crank Brothers Klic HP Gauge + CO2
$39.94 $46.99 15% Savings
The high-volume portable hand pump with hidden magnetic hose, pressure gauge, and co2 inflator. - Premium pump with flexible rubber hose that hides inside the body of the pump when not in use – perfect for those stealth air-strikes! - Features also include a concealed co2 inflator, air pressure gauge, presta/schrader valve adapter, magnetic head with twisting collar, and a folding and locking handle - Hp (high pressure) version recommended for tires 45c and narrower - All klic pumps come with a bottle cage bracket mount - Length: 260mm - Pressure: 110psi / 7.6bar - Warranty: 5 years - Weight: 186g
Crank Brothers B17-Bit Multi-Tool
$31.49
Crank Brothers' B17-Bit Multi-Tool has a stainless steel frame with 17 common tools needed for road and trail repairs: 2 flat and 2 Phillips screwdrivers, 1.5, 2, 2.5, 3, 4, 5, 6, and 8mm Allen wrenches, T10 and a T25 Torx heads, and 2 spoke wrenches. It uses a magnetized bit socket that keeps the bit firmly in place. The bit holder locks closed, so that everything's there when you need it!
Crank Brothers Iodine 11 Handlebar
$165.00
Keep your all-mountain rig light and prime for shredding with Crank Brothers' Iodine 11 Riser Bar! Thanks to its high-modulus carbon construction, it's the perfect weight-saving, stiffness-enhancing upgrade for your trail-dominating machine. You'll also love its 30mm of rise that puts you in the ideal position for climbing up and ripping back down. And, did you check out those graphics? Classy.
Crank Brothers 5050 Pin Kit
$11.99
Crank Brothers' 5050 Pin Kit includes fifty 8mm-long steel pins that let you customize the traction on your 5050 or Mallet pedals. Thread lock is pre-applied to every pin.
No Image
$467.40 - $562.50 $750.00 Up To 25% Savings
Elite-level aluminum wheels for XC/trail Massively different - Simple and beautiful, our unique wheel design is based around principles of strength, stiffness, and acceleration Faster to accelerate - Low rotational inertia: unique wheel design distributes mass closer to the hub for faster acceleration and deceleration - Tubeless ready hole-less rims: stronger and no rim tape required for tubeless setup Stronger and stiffer - Twinpair spoke technology: designed using the strongest shape in construction, the triangle, to maximize strength and stiffness - Beautifully simple single spoke length: easy to true and replaceable without removing tire - Rim material: 6061-t6, smooth weld joint - Rim finish: shot peen, black + red anodizing - Rim width: 21mm - Rim depth: 19.5mm - Spoke material: Sapim stainless steel - Spoke butting: 2.0/1.6/2.0 - Spoke length: 166mm - Spoke pins: hollow 7075-t6 aluminum - Nipple size: 3.2 x 139mm - Front hub material: cobalt, 6061-t6 - Front hub bearing: sealed cartridge 6804 (x2) - Front hub end caps: 15mm (installed), 9mm (included) - Rear hub material: cobalt, 6061-t6 - Rear hub bearings: sealed cartridge 6903 (x2), 6902 (x2) - Rear hub end caps: 12x142mm (installed), 10x135mm (included) - Freehub: 3-pawl, 21T, alloy - XD driver: XD driver compatible, available separately - Skewers: skewers not included, available separately - Weight: 29-inch, 1735g per set - Weight: 27.5-inch, 1650g per set - E-bike compatible: urban/XC e-bikes up to 350 watts max
Crank Brothers m10
$17.99 - $19.99
The ultimate trailside companion. These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on. The m10 includes: Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8 Screwdrivers: Phillips #2, flat #2 Torx: t-25 Length: 89 mm Weight: 124g Warranty: Lifetime
Crank Brothers CO2 Sterling (6-pack)
$15.29
The Crank Brothers CO2 Sterling 16g threaded cartridges are compatible with Crank Brothers' Sterling CO2 Inflator. Includes: six threaded 16g cartridges
No Image
$412.50 - $550.00 $550.00 Up To 25% Savings
Enthusiast-level aluminum wheels for XC/trail Massively different - Simple and beautiful, unique wheel design is based around principles of strength, stiffness, and acceleration Faster to accelerate - Low rotational inertia: unique wheel design distributes mass closer to the hub for faster acceleration and deceleration - Tubeless ready hole-less rims: stronger and no rim tape required for tubeless setup Stronger and stiffer - Twinpair spoke technology: designed using the strongest shape in construction, the triangle, to maximize strength and stiffness - Beautifully simple single spoke length: easy to true and replaceable without removing tire - Rim material: 6061-t6, smooth weld joint - Rim finish: shot peen, black anodizing - Rim width: 21mm - Rim depth: 19.5mm - Spoke material: stainless steel - Spoke butting: 2.0/1.6/2.0 - Spoke length: 166mm - Spoke pins: solid 7075-t6 aluminum - Nipple size: 3.2 x 139mm - Front hub material: cobalt, 6061-t6 - Front hub bearing: sealed cartridge 6804 (x2) - Front hub end caps: 15mm (installed), 9mm (included) - Rear hub material: cobalt, 6061-t6 - Rear hub bearings: sealed cartridge 6903 (x2), 6902 (x2) - Rear hub end caps: 12x142mm (installed), 10x135mm (included) - Freehub: 3-pawl, 21T, steel - XD driver: XD driver compatible, available separately - Skewers: skewers not included, available separately - Weight: 29-inch, 1790g per set - Weight: 27.5-inch, 1710g per set - E-bike compatible: urban/XC e-bikes up to 350 watts max
No Image
$550.00
Enthusiast-level aluminum wheels for all mountain Massively different - Simple and beautiful, our unique wheel design is based around principles of strength, stiffness, and acceleration Faster to accelerate - Low rotational inertia: unique wheel design distributes mass closer to the hub for faster acceleration and deceleration - Tubeless ready hole-less rims: stronger and no rim tape required for tubeless setup Stronger and stiffer - Twinpair spoke technology: designed using the strongest shape in construction, the triangle, to maximize strength and stiffness - Beautifully simple single spoke length: easy to true and replaceable without removing tire - Rim material: 6061-t6, smooth weld joint - Rim finish: shot peen, flat black anodizing - Rim width: 23mm - Rim depth: 19.5mm - Spoke material: stainless steel - Spoke butting: 2.0 straight gauge - Spoke length: 166mm - Spoke pins: solid 7075-t6 aluminum - Nipple size: 3.2 x 139mm - Front hub material: iodine, 6061-t6 - Front hub bearing: sealed cartridge 6805 (x2) - Front hub end caps: 15mm (installed), 20mm (included) - Rear hub material: iodine, 6061-t6 - Rear hub bearings: sealed cartridge 6903 (x2), 6902 (x2) - Rear hub end caps: 12x142mm (installed), 10x135mm (included) - Freehub: 3-pawl, 21T, steel - XD driver: XD driver compatible, available separately - Skewers: skewers not included, available separately - Weight: 27.5-inch, 1845g per set - E-bike compatible: trail/AM e-bikes up to 350 watts max
Crank Brothers Iodine Grips
$22.49
Crank Brothers' Iodine Grips have what you need for all-mountain riding. Their Kraton rubber construction and tacky logo pattern offer a solid grip and superb bar feel. And, to prevent twisting, they utilize dual locking clamps.
Crank Brothers Premium MTB Cleats
$27.00
Crank Brothers' Premium MTB Cleats are perfect for your Crank Brothers Eggbeater, Candy, Acid, Smarty, Mallet, and Quattro pedals. They're made from solid brass for crisp entry and exit, and top-notch durability.
Crank Brothers Titanium Spindle Kit
$150.00
The ultimate weight-saving upgrade.  - The kit includes: 1 pair titanium spindles + refresh kit (Enduro cartridge bearings, Igus ll-glide bearings, DSS double seal system: internal and external seals, hex alloy end caps, o-rings, nuts, sleeve bushings, & bearing removal tool). - Compatible with: Eggbeater, Candy, Mallet, 5050, Double Shot, model years 2010-present - Weight: 60g per pair - Spindle material: 6al/4v titanium - Max. rider weight: 200lb/90kg - Q-factor: 52 mm
Crank Brothers 5050 3
$89.99
Crank Brothers steps up to the plate to provide downhillers, freeriders and BMXers with one sweet platform pedal. Most flat pedals have the traction pins' hex holes on top, making them very difficult to remove if they break or are worn down. The 5050 3s have removable plates so you have full freedom to customize pin location for your preference and the terrain. Additionally, this puts the pin's hex-hole location on the back of the plates, making them easy to remove after heavy duty use. The 5050 3 pedals are crafted from 6061-aluminum with a chromoly spindle and utilize sealed needle and cartridge bearings for durability and low maintenance.
Crank Brothers Traction Pads for Candy 7/11
$14.99
Engineered to optimize the interface between the pedal and shoe for ultimate performance and power transfer. The kit includes: - 8 × 1mm traction pads - 8 × 2mm traction pads Compatible with: - Candy 7 & 11 - Model years 2016 – present
No Image
$750.00
Elite-level aluminum wheels for all mountain Massively different - Simple and beautiful, our unique wheel design is based around principles of strength, stiffness, and acceleration Faster to accelerate - Low rotational inertia: unique wheel design distributes mass closer to the hub for faster acceleration and deceleration - Tubeless ready hole-less rims: stronger and no rim tape required for tubeless setup Stronger and stiffer - Twinpair spoke technology: designed using the strongest shape in construction, the triangle, to maximize strength and stiffness - Beautifully simple single spoke length: easy to true and replaceable without removing tire - Rim material: 6061-t6, smooth weld joint - Rim finish: shot peen, black + silver anodizing - Rim width: 23mm - Rim depth: 19.5mm - Spoke material: Sapim stainless steel - Spoke butting: 2.0 / 1.8 / 2.0 - Spoke length: 166mm - Spoke pins: hollow 7075-t6 aluminum - Nipple size: 3.2 x 139mm - Front hub material: iodine, 6061-t6 - Front hub bearing: sealed cartridge 6805 (x2) - Front hub end caps: 15mm (installed), 20mm (included) - Rear hub material: iodine, 6061-t6 - Rear hub bearings: sealed cartridge 6903 (x2), 6902 (x2) - Rear hub end caps: 12x142mm (installed), 10x135mm (included) - Freehub: 3-pawl, 21T, alloy - XD driver: XD driver compatible, available separately - Skewers: skewers not included, available separately - Weight: 29-inch, 1850g per set - Weight: 27.5-inch, 1780g per set - E-bike compatible: trail/AM e-bikes up to 350 watts max
Crank Brothers Opium 3 Wheelset 27.5-inch
$750.00
Elite-level aluminum wheels for DH/freeride. Massively different: simple and beautiful, the unique wheel design is based around principles of strength, stiffness and acceleration. Faster to accelerate: low rotational inertia. Unique wheel design distributes mass closer to the hub for faster acceleration and deceleration. Tubeless-ready, hole-less rims: stronger and no rim tape required for tubeless setup. Stronger and stiffer: Twinpair spoke technology. Designed using the strongest shape in construction, the triangle, to maximize strength and stiffness. Beautifully simple, single spoke length: easy to true and replaceable without removing tire.
Crank Brothers Pedal Rebuild Kit
$15.99
Everything you need to keep those Crank Bros pedals spinning freely is found in their Pedal Rebuild Kit. Each kit includes parts and instruction to rebuild one pair of Crank Bros. pedals.
Crank Brothers Sterling C02 Infaltor
$17.99
Crank Brothers' Sterling C02 Inflator makes quick work of getting you back in the saddle. We've all seen C02 inflators, but it's the details that set the Crank Brother's Sterling apart. Check out the frost guard on the canister and and the push-spring valve for easy air control. It comes complete with two 16g threaded cartridges.
Page 1 of 4 Next page