The Super Patch Kit is comprised of a small plastic case, a piece of sandpaper for roughing up the tube and 6 peel-and-stick patches so no gluing is required. The patches stick fast thanks to 3M technology and they're thin and flexy to stretch with the tube. There's no easier way to patch a tube.
Park's Compact Crank Puller is used to remove Shimano Octalink, ISIS Drive and square-taper cranksets. It includes 2 rotating tips (16.3 and 11.3mm) to make the job easy. This is a great tool for your travel and home tool kit.
Park's FR-5G Cassette Lockring Tool fits most cassette lockrings from Shimano, SRAM, SunTour and SunRace. Made from heat-treated tool steel, the FR-5G features an extra-long splined body to prevent slippage and a guide pin to ensure the tool is in straight, preventing stripped lockrings. And, it can also be used to remove and install Shimano disc brake rotors. The FR-5G requires the use a chainwhip tool to prevent the cassette from turning during lockring removal.
A favorite of shop mechanics for over 30 year's, Park's CCP-22 Crank Puller removes crankarms that feature square tapers, and those that fit on Power Drive and Power Spline bottom bracket interfaces. The long, comfortable, built-in handle and fine thread provide the leverage needed to remove even the tightest crankarms. And, there's a rotating tip to ensure smooth operation and long life.
Park's Hex Wrench Set offers all the popular Allen wrenches (1.5, 2, 2.5, 3, 4, 5 and 6mm) in a convenient fold-up unit. The tool tips are chamfered for a positive grip and the one-piece fiber-reinforced-resin handle is light, comfortable, slip resistant and 40% stronger than steel.
The Deluxe Wall-Mount Repair Stand easily mounts to any post or wall stud. This shop-quality stand places the bike approximately 14.5 inches from the wall, so you'll have plenty of work space. The awesome clamp is Park's Professional Micro-Adjust model, which features replaceable rubber jaws; fits seatposts and frame tubes from 7/8 to 3-inch diameter; includes recesses for cable housing and rotates 360 degrees for optimum bike positioning. This great stand lets you work on your bikes just like a pro and is built to last.
Designed specifically for the home mechanic who wants the best, the AK-3 Advanced Mechanic Tool Kit is a special collection of Park's finest tools, all housed in a tough toolbox. The AK-3 includes over 40 tools to work on a wide variety of current model bikes. A great set of tools a mechanic should not be without. Kit Includes: BBT-9 Bottom Bracket Tool for 16-Notch External Bearing Cups BBT-32 Bottom Bracket Tool for 20-Notch Shimano and ISIS Drive BO-2 Bottle Opener CC-3.2 Chain Checker CM-5.2 Cyclone Chain Scrubber CN-10 Professional Cable and Housing Cutter CNW-2 Chainring Nut Wrench CT-3.2 Chain Tool CWP-7 Compact Crank Puller DCW-1 Double Ended Cone Wrench: 13/14mm DCW-2 Double Ended Cone Wrench: 15/16mm DCW-3 Double Ended Cone Wrench: 17/18mm FR-5.2 Cassette Lockring Tool GP-2 Pre-Glued Super Patch Kit GSC-1 GearClean Brush HXS-1.2 Professional L-Shaped Hex Wrench Set MLP-1.2 Master Link Pliers PAW-12 12" Adjustable Wrench PW-5 Home Mechanic Pedal Wrench RR-12 Tape Measure SD-2 #2 Phillips Screwdriver SD-3 3mm Flat Blade Screwdriver SR-12 Chain Whip 5- to 12-Speed Compatible SW-0 Precision Spoke Wrench: .127" SW-2 Precision Spoke Wrench: .136" TB-2 Emergency Tire Boots TL-1.2 Tire Lever Set TWS-3 Torx Compatible 3-Way Wrench #349 Soft Bristle Soaping Brush
Park's Mini Chain Brute Chain Tool goes anywhere and features a V-shaped handle, a super-strong replaceable pin, and fine threads to make chain removal and installation a breeze. The CT-5 works on any derailleur chain, including Shimano Hyperglide and 9-, 10-, and 11-speed. It works for loosening tight links, too.
The Home Mechanic Repair Stand offers Park Tool quality in an entry-level repair stand for home mechanics. The 3-point leg system and adjustable height (from 39 to 57 inches) create a stable, ergonomic repair station for easy, efficient wrenching. Plus, the great clamp fits seatposts and frame tubes from 7/8 to 3 inches in diameter, has replaceable protective rubber jaws and rotates 360 degrees for easy access to all parts of your bike. It will also clamp round and aero seatposts. This stand even folds to 41 inches for easy portability and storage.
Featuring a three-color Park Tool logo and "bike wrench" graphic, Park Tool's Pint Glass is made from heavyweight, dishwasher-safe glass.
Park's Gear Clean Brush has a handle on one end with a curved, serrated edge perfect for cleaning between cassette cogs. The other end's tough nylon bristles are ideal for cleaning the derailleurs, chain and other drivetrain parts to keep them clean and prevent premature wear. It also works great on brakes and other components that collect dirt and grime. The GearClean easily fits in a toolbox or pack.
Park's Home Mechanic Pedal Wrench is great for your home workshop and event tool box. This top-quality 15mm pedal wrench provides the leverage you need to remove stubborn pedals. It's made to last from heat-treated steel, and the handle has a vinyl grip for comfort.
Park's Lockring Wrench is for installing and removing the adjustable-cup lockring used on Dura-Ace and XTR bottom brackets that use a left-side lockring (it fits several other models and brands of lockrings, too). The Lockring Wrench is laser cut and engages 5 of the lockring's 6 notches for a precise, secure fit. The vinyl-coated handle offers a great grip, too.
• Updated to fit better in the hand with a more rounded, smoother shape • The precision sized SW-7.2 fits the three most popular spoke nipple sizes on the market • Nickel plated for years of service • Designed for the home mechanic. FIts the following size spoke nipples: • .127" (3.23mm) • .130" (3.30mm) • .136" (3.45mm)
The Triple Spoke Wrench is super-convenient because it fits the 3 most popular spoke-nipple sizes. Use it to keep all your bikes' wheels true, round and tight so you can keep riding strong.
An expanded and evolved set of our finest professional level shop tools that addresses the changing tool demands of modern bikes and their mechanics. The PK-2 includes over 65 of our best tools and was put together with versatility in mind. A great way to outfit a pro bench, or to set up a fabulous home workshop, the PK-2 is an impressive set of tools that can help you perform hundreds of repairs and maintenance tasks.
An expanded and evolved set of our finest professional level shop tools that addresses the changing tool demands of modern bikes and their mechanics. The PK-3 includes over 70 of our best tools and was put together with versatility in mind. A great way to outfit a pro bench or to set up a fabulous home workshop, the PK-3 is an impressive set of tools that can help you perform hundreds of repairs and maintenance tasks. Kit Includes: ATD-1.2 Adjustable Torque Driver AWS-1 Three-Way Hex Wrench Set: 4, 5, 6mm AWS-3 Three-Way Hex Wrench Set: 2, 2.5, 3mm BBT-5/FR-11 Bottom Bracket/Cassette Lockring Tool for Campagnolo (12-tooth) BBT-9 Bottom Bracket Tool for 16-Notch External Bearing Cups BBT-32 Bottom Bracket Tool for 20 Notch Shimano and ISIS Drive BCB-4.2 Bike Cleaning Brush Set BO-2 Bottle Opener CBW-1 Open End Wrench: 8/10mm CBW-4 Open End Wrench: 9/11mm CC-3.2 Chain Checker CCP-22 Crank Puller for Square Taper Cranks CCP-44 Crank Puller for Splined Cranks CM-5.2 Cyclone Chain Scrubber CN-10 Professional Cable and Housing Cutter CNW-2 Chainring Nut Wrench CP-1 Chain Whip Pliers CT-3.2 Chain Tool DAG-2.2 Derailleur Hanger Alignment Gauge DCW-1 Double Ended Cone Wrench: 13/14mm DCW-2 Double Ended Cone Wrench: 15/16mm DCW-3 Double Ended Cone Wrench: 17/18mm DH-1 Dummy Hub DP-2 Threaded Dummy Pedal FR-5.2 Cassette Lockring Tool: Shimano, SRAM, Sun Race GP-2 Pre-Glued Super Patch Kit HCW-15 36mm/32mm Headset Wrench HMR-8 Shop Hammer HT-8 8mm Hex Tool MLP-1.2 Master Link Pliers NP-6 Needle Nose Pliers OBW-4 Offset Brake Wrench OM-1 Overhaul Mat PAW-12 12" Adjustable Wrench PH-1.2 P-Handle Hex Wrench Set PW-4 Professional Pedal Wrench RR-12 Tape Measure SBC-1 Spoke, Bearing and Cotter Gauge SCW-13 13mm Shop Cone Wrench SCW-14 14mm Shop Cone Wrench SCW-15 15mm Shop Cone Wrench SCW-16 16mm Shop Cone Wrench SCW-17 17mm Shop Cone Wrench SCW-18 18mm Shop Cone Wrench SCW-19 19mm Shop Cone Wrench SD-SET Shop Screwdrivers (Set of 4) SP-7 Side Cutter Pliers SW-0 Precision Spoke Wrench: .127" SW-1 Precision Spoke Wrench: .130" SW-2 Precision Spoke Wrench: .136" SZR-1 Shop Scissors TB-2 Emergency Tire Boots TL-1.2 Tire Lever Set TL-4.2 Tire Lever Set TWS-1 Torx Compatible Wrench Set
Park's Cyclone Chain Scrubber is made of durable materials throughout and features an extra-large solvent reservoir, a series of rotating brushes, and a two-step cleaning process to get chains really clean without removal. There's even a strong magnet that draws metal particles scrubbed from the links to the bottom of the reservoir, preventing redistribution. And, the Cyclone's large handle makes it easy to hold and fill.
Park's Master Chain Tool is designed specifically to work with the tight tolerances and narrow profiles of 10- and 11-speed chains and all high-quality derailleur chains. It's made of tool steel for excellent durability and uses an integrated link pocket to ensure precise alignment. It also features perfectly contoured, cushioned handles for comfort and ease of use. This pro-level chain tool includes a removable anvil to peen Campagnolo 11-speed chains. (The CT-4.3 is not compatible with Wipperman chains.)
Park's Valve Core Tool is great for tightening, removing and installing Schrader and Presta valve cores (the cores are inside the valve), and also Presta valve extenders that have 5mm wrench flats. It's a handy tool to save a tube when all that's wrong is a broken valve, and it also lets you remove valves to easily insert sealant.
Park's I-Beam Mini Fold-Up Hex Wrench/Screwdriver/Torx Set with Chain Tool includes 1.5, 2, 2.5, 3, 4, 5, and 6mm Allen wrenches, a socket 8mm Allen, a regular screwdriver, a T25 Torx tool (for disc-rotor bolts), a tire lever, spoke wrenches and a chain tool. The I-Beam conveniently fits in pockets and packs, too.
Park's Torx Wrench Set is just what you need to make repairs on many of your bike parts that use Torx (star-shaped) fittings, such as disc brakes, pedals, chainring bolts, and others. It offers the common bicycle wrench sizes (T7, T9, T10, T15, T20, T25, T27, T30 and T40) in a convenient fold-up set. Its composite handle is super strong, comfortable to use and slip resistant.
Park's Folding Chain Tool is a heavy-duty tool-steel shop-quality chain tool that also folds for carrying in your pack or pocket for use on the road and trail. It's compatible with 9-, 10- and 11-speed chains. It also includes a folding peening anvil for Campagnolo 11-speed chains.
It's a spoon! It's a fork! Park's Stainless-Steel Spork is a take-along culinary multi-tool made from high-quality, rustproof stainless steel with a comfortable vinyl-coated handle. Who said nutrition has to come from energy bars? Pack your favorite eats and Park's Spork for enjoying on-the-ride snacks and mid-repair munchies in style! The Spork has a hole for carrying it on a keychain or hanging it on your workbench.
Designed and built especially for singlespeed bikes, Park's SS-15 Single Speed Spanner is a durable forged-steel tool with a 15mm socket wrench for axle nuts, 15mm open-end wrench for pedals, a tire lever, and a bottle opener. It's just the right size to take along on rides and is great for wrenching in your shop too.
The TL-6.2 is a composite covered, steel core tire lever that provides smooth, scratch-free operation and superior strength to help remove even the tightest tires. Newly upgraded with a tougher, more slippery material and a protruding steel tip to more easily and securely engage the tire bead. A perfect size (5"/12.7cm) to either take-along, or use as an everyday shop lever. Set of two.
Park's MTB-3.2 Rescue Tool includes a 10-speed compatible chain tool; regular and Phillips screwdrivers; T10, T20, and T25 Torx drivers; 1.5, 2, 2.5, 3, 4, 5, 6, 8mm Allen wrenches; 8, 9, 10mm box wrenches; 3 spoke wrenches; a pedal wrench; a serrated knife; 2 tire levers; and a bottle opener. It's small and light for easy carrying and features durable stainless-steel and nickel-plated tools. Plus, its 3-piece design sports tough nylon handles for an excellent grip.
Built and designed for bicycles, the INF-2 utilizes a redesigned, more durable, dual-sided, 360º rotatable Presta and Schrader head. The INF-2 also sports a new, lighter weight body and a redesigned trigger to facilitate multiple hanging options. It features a built in pressure gauge (0–160 psi, 0–11 bars) with a protective gauge boot, and the body accepts any 3/8" NPT male threaded fitting. Built for everyday shop use and 100% rebuildable!
Park's Fixed-Gear Lockring Wrench features 2 different radius hooked spanners for a precise fit, and easy removal and tightening of most fixed-gear lockrings. The HCW-17 fits rings with an outside diameter of 41 to 44mm. It also fits BMX cassette hub lockrings with external notches.
The I-Beam Mini Fold-Up Set includes 3, 4, 5, and 6mm Allen wrenches, a socket 8mm Allen and regular screwdriver. It's the perfect mini-tool to get you out of binds or make quick adjustments. And, it conveniently tucks into a pocket or pack.
Page 1 of 16 Next page