Parts

These inline cross brake levers have super-smooth Delrin bushings, a hinged clamp, drilled-out lever bodies for lighter weight and grip, and angled cable routing to make setup and operation a breeze. They’re designed for 31.8mm handlebars, but with All-City Cross Lever shims (sold separately) they’ll work perfectly with 26.0 as well. - For use as in-line, secondary brake levers in addition to standard road brake levers - Hinged clamp fits 31.8 bars; shims for 26.0 sold separately (BR8121) - Cantilever and caliper brake compatible

The industry standard cable-actuated disc brake since its introduction is still popular due to smooth ball bearing operation and ease of installation and maintenance. - All calipers have 74mm mounting bolt spacing - For use with long cable-pull levers - Pad retraction and spring tension are adjustable - Includes steel-backed sintered pads - Brake Caliper Type: Post Mount - Brake Lever Actuation: Long Pull - Hub/Disc Compatibility: 6-Bolt - Rotor Included: No

The squeeze of our levers is what dreams are made of (and you know which dreams we're talking about). Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - Reach Adjustment - Qwik-Adjust Barrel Adjuster - Compatible with mechanical disc brakes and linear-pull brakes

- Includes stainless bolts - Fits 160mm front and 140mm rear rotors

- For 19mm crank spindles and Euro bottom bracket frames - Sealed quad bearing design with alloy cups - Shell: Euro - Interface: English - Spindle Type: 19mm

The Cambium C19 All Weather Carved is a wider saddle made for an upright riding position. It features a hole for pressure relief and additional flex, eliminating contact points which cause discomfort for some riders. With the same contemporary design of the Brooks Cambium range, the All Weather is a durable and comfortable saddle that is “ready to ride,” thanks to a vulcanized natural rubber top for flexible performance requiring no breaking in period. From freezing rain to blazing sunshine, the waterproof, weatherproof nylon cover is made to perform flawlessly in all conditions. The updated fiberglass reinforced backplate has loops for a saddle bag or other riding accessories. - Vulcanized natural rubber and nylon top - Steel rails with a reinforced plastic backplate - Length: 275mm - Width: 184mm - Height: 52mm - Weight: 490g

Price point 11 Speed chain has a wider link design for increased shifting performance and reduced noise, and slotted links for reduced weight. - Designed specifically for use with Campagnolo 11 speed drivetrains only

For smooth shifting and a quiet drivetrain, pick up Campagnolo's Chorus 11-speed chain. It's unidirectional for unparalleled function and features lightweight hollow pins as well as an anti-friction treatment for shifting perfection. It also boasts excellent wear and flex resistance.

Ultra-Link Chains designed to maximize performance with Campagnolo drivetrains, while increasing durability and power transmission. - Delivers extremely high performance levels and durability over time - Design is optimized to perform with teeth on sprockets and crowns of Chorus drivetrain components - Solid pins are aligned with the external surface for smoothness and precision - 5.15mm width is designed to produce faster and lighter shifting Specifications: - Links: 110 - Chain Connection Type: Pressed Pin - Half Link Chain: No - Drivetrain Speeds: 12 - Weight: 241g

The Campagnolo C13 EKAR Chain was developed specifically for the EKAR 1x13-speed gravel system. - Wide-narrow design allows for efficient drive, smooth shifts and high security - The narrow profile is lightweight, strong, and efficient - Strong, durable, links feature different grades of steel and coatings for strength and to withstand wear - Unique ultrasound bath lubrication impregnation system for long chain life - C-Link allows for easy removal and cleaning Specifications: - Links: 117 - Chain Connection Type: Quick Link - Drivetrain Speeds: 13 - Weight: 242g

Cane Creek's 10 Series has light, tough, and beautiful machined 6061 T6-aluminum cups, Cane Creek's corrosion-resistant black-oxide angular-contact bearings and quality seals throughout to keep the grease in and the dirt out. • Technical Description: EC34/28.6/H16/K|EC34/30 /H12/K • Top Type: EC - External Cup • Top Head Tube Inside Dia.: 33.95mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 16mm • Top Bearing Type: Black Oxide • Bottom Type: EC - External Cup • Bottom Head Tube Inside Dia.: 33.95mm • Crown Race Seat Dia.: 30.015mm • Crown Race Type: Polymer • Bottom Stack Height: 12mm • Bottom Bearing Type: Black Oxide • Material: 6061 aluminum • Weight: 88.29g

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: ZS44/28.6/H8/K|ZS56/40/H4/K • Top Type: ZS - ZeroStack • Top Head Tube Inside Dia.: 44.00mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 8mm • Top Bearing Type: Black Oxide, Sealed • Bottom Type: ZS - ZeroStack • Bottom Head Tube Inside Dia.: 55.95mm • Crown Race Seat Dia.: 39.79mm • Crown Race Type: Steel, Face-Sealed • Bottom Stack Height: 4mm • Bottom Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 109g

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: ZS49/28.6/H8/K • Top Type: ZS - ZeroStack • Top Head Tube Inside Dia.: 49.61mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 8mm • Top Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 57g

Cane Creek's Aheadset is a simple, affordable solution for your headset needs. • Bearing Type: Cup and Cone • Color: Black • Crown Race: 30 • Defined Color: Black • Lower Stack Height: 12 mm • S.H.I.S Lower: EC34 • S.H.I.S Upper: EC34 • S.H.I.S. Stem Clamp Diameter: 28.6-26tpi Quill • Upper Stack Height: 22 mm • Weight: 205 g

Cane Creek's Aheadset is a simple, affordable solution for your headset needs. • Bearing Type: Cartridge • Color: Black • Crown Race: 30 • Defined Color: Black • Lower Stack Height: 2 mm • S.H.I.S Lower: IS41 • S.H.I.S Upper: IS41 • S.H.I.S. Stem Clamp Diameter: 28.6 • Upper Stack Height: 7 mm • Weight: 65 g

Replacement inserts for Thudbuster G4 suspension seatposts. - Cane Creek ST G4 Elastomer Insert -Soft

A higher quality spring greatly improves the performance of your coil shock. VALT springs from Cane Creek are much lighter than traditional steel springs while pushing the boundaries of performance and durability. - Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks - Also compatible with Manitou, Marzocchi, XFusion, ELKA/MRP, BOS and DSP - Compatible with Fox coil shocks with required spring clip adaptor

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets

• Replacement hoods for road brake levers with traditional, non-aero cable routing • Soft, tacky rubber for a sure grip • Available in black or brown

Take a seat. Comfy makes happy, perfect for everyday with a quilted saddle top keeps things plush. Where it thrives: Leisurely rides, in town What it's built for: Comfort, durability Highlights: - Quilted saddle top for comfort and style - Steel rails for strength and durability 170mm width

Get a grip. Silicone construction and a round-to-hexagonal tapered profile produce a lightweight and natural-feeling contact point for comfort and control. Where it thrives: In competition, challenging trails What it's built for: Control, comfort Highlights: - Unique 36mm outer hex shape for control - Rounded 33mm inner profile improves grip - Silicone construction for comfort

Get a grip. A straight profile, lock-on grip that combines a ribbed, mushroom pattern on the palm side for comfort, and hex-pattern on the underside for grip. Where it thrives: Challenging trails, out in the elements What it's built for: Control, grip Highlights: - Mushroom ribs for comfort and control - Micro-Hex pattern for all-weather grip - Single lock-on clamp for security

Cloud 9's MX Seat will make every ride more comfortable and fun. It boasts plush padding and an anatomical cutout so that you enjoy ample cushioning and protection. Plus, for excellent durability, the front and back are reinforced.

- Comfort saddle multi-stage foam with a memory foam top layer and anatomical relief channel for increased comfort - Water resistant material for increased all weather durability - Front and rear underside bumpers for increased wear resistance - Dimensions: 255 x 220mm

- Memory-foam padding for extra comfort - Elastomer suspension provides a smooth ride - Extra-large 11.75" x 10.75" size

Polyurethane pads with diamond plate traction pattern allow riders to customize their pedals for a perfect interface with any shoe. - Kit includes eight 1mm traction pads and eight 2mm traction pads

Cleats with a more forgiving 10-deg release. - Optimized for novice riders or those new to clip-in pedals - 10-deg release angle makes it easier to unclip - 2-hole bolt pattern for mountain bike shoes - Plastic spacing shims included - Compatible with all Crankbrothers clip-in pedals

Widen your Q-factor to 57mm. - Long spindles are 5mm longer than standard. - The kit includes: 1 pair long spindles + refresh kit (Enduro cartridge bearings, igus ll-glide bearings, DSS double seal system: internal and external seals, hex alloy end caps, o-rings, nuts, sleeve bushings, & bearing removal tool). - Compatible with: Eggbeater, Candy, Mallet, 5050, Double shot, model years 2010-present - Weight: 112g per pair - Spindle material: forged SCM 435 chromoly steel - Q-factor: 57mm

The official pedal of 2x DH World Champion Loic Bruni. - Designed with 2x World Champion Loic Bruni - Asymmetrical double-anodized red & blue colorway - Concave platform for secure foothold - 8 adjustable pins per side for grip - Traction pad technology customizable interface - Ribbed body for better traction when unclipped - Chamfered edges to reduce rock-strikes - 57mm q-factor for stability at speed - 4-sided entry / superior mud shedding - Customizable float & release angle - Premium bearings & double seal system

A revolution in performance and reliability. The kit includes premium internal components: - Inner bearing o-ring x 2 - Spindle seal x 2 - Outer Igus solid bearing x 2 - Inner Igus solid bearing half x 4 - Bearing Retainer Bolt x 4 - Outer o-ring x 2 - Grease port screw x 2 - Compatibility: Stamp (2016), Stamp 7 (2017+), Stamp 11 (2017+)

Crank Brothers' Premium MTB Cleats are perfect for your Crank Brothers Eggbeater, Candy, Acid, Smarty, Mallet, and Quattro pedals. They're made from solid brass for crisp entry and exit, and top-notch durability.

Crank Brothers' Quattro 3-hole cleats let you use Crank Bros. pedals with your road shoes. The cleat and walking plate mount directly to shoes that use a traditional 3-hole mounting setup. - Weight (pair): 86 grams - Shoe compatibility: LOOK/SPD-SL - Release angle: 15 or 20 degrees

Protect the soles of your shoes with the Shoe Shields from Crank Brothers. These stainless-steel plates install under your cleats and prevent the pedal from digging in to your carbon-soled shoes. - Sold in pairs

Crank Brothers' Tread Contact Sleeves shim the area between the pedal and your shoes' tread so there is no rocking or play when you're clipped in. They provide a solid platform to put down all your power! They work with either your Eggbeaters or Candy pedals, and each includes 1mm, 2mm, and 3mm shims.

Excellent modulation, cooler temperatures, and great wet weather brake performance. The Black Prince brings the feel of braking on alloy wheels to carbon wheels. - Pad Type: Replacement Insert-Cartridge - Intended Brake Type: Caliper - Rim Compatibility: Carbon

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240 Disc Ring Nut

Service your DT Swiss star ratchet hubs and wheels with DT Swiss Ratchet and Kits. - DT Swiss Star Ratchet Kit - 54T

Ratchet freehub bodies have a gloss finish and don't have a seal, as this is fixed on the hub shell. The Ratchet System was the first of this type for DT Swiss; used in the mid-range products like the 350 hubs. Includes end cap for 12 x 142 and 12 x 148mm hubs Fits Shimano 12-speed Micro Spline cassettes Crafted from lightweight aluminum Compatible with 12mm thru-axles

Plush Ride Closed cell memory foam saddle adds comfort to any bike. Features - Versatile: Grab handle for easy bike transport - Visibility: Reflective printing on nose and rear for added safety - Construction: Closed cell memory foam comfort saddle. Dual dampening spring cushion shocks reduce road vibration - Quick Assembly: Easily mount on standard seatpost rail

- Clamps to a threadless steerer - Offers up to 4-1/2" stem height increase - Forged 6061-aluminum provides extra strength - Machined aluminum top cap is threaded, providing easy installation

Dimension Freewheels are excellent drivetrain component replacements. With smooth shifting performance and durable construction, they'll help breathe new life into older bikes. - A must-have in any bicycle service department - One-piece design - Shimano index compatible - Works with most friction shifters - Suitable for use with e-bike drivetrains

Dimension Basic Track Cog Lockring with 1.29-inch x 24 tpi left-hand thread. - Stainless steel - Fits all but Campagnolo and Miche hubs - Not compatible with Phil Wood hubs

Dimension Stem Column Adaptors - Total quill length 180mm - Measurement from minimum insertion to top of steerer adaptor is 118mm - Alloy - Quill insertion diameter: 1-inch

Dimension Steel Cogs are splined for BMX and singlespeed hub compatibility. - Steel with chrome finish - Cogs are splined for Shimano BMX and singlespeed hub compatibility - Compatible with 1/2-inch and 1/8-inch chains

Easton's EA30 XC Handlebar is the perfect addition to the front end of your bike. Its 6061-aluminum construction delivers strength and durability, while the shot-peened finish offers maximum fatigue strength. When you want a great flat bar for your rig, the EA30 delivers.

The Easton Spider and Ring assembly features the Cinch Direct Mount System, making a swap between ring configurations a fast and simple procedure. This system also provides a significant weight savings by eliminating the material overlap and extra bolt hardware that is required for a traditional spider with chainring configuration. - EA90 Aluminum

- 410 Stainless steel construction - (6) Black M5 mounting bolts - 85g (160mm)

- Look ARC Delta compatible - 9° rotation allows natural foot movement - Includes mounting hardware

- AL 6066-T6 3D forged alloy construction - Fits 1-1/8 (28.6mm) steerer forks - Fits 31.8mm handlebar clamp - +/- 6 degree angle - Heat treated hardware - Stack height: 41.8mm

Electra's Amsterdam Handlebars are a great set of chrome-plated cruiser-style bars with the rise and width for comfortable upright riding and a commanding view ahead.

- Grade 10 chromium steel balls

- Defined suspension on rough surfaces - Lightweight and comfortable construction - Uncompromised road cycling performance Unique comfort, lightweight and aesthetically modern: The Ergon leaf spring seatpost revolutionizes comfort on the road bike, all-road and gravel bike. Rough roads and gravel are smoothed out by the two carbon fiber VCLS leaf springs, while the saddle angle remains unchanged by the parallel displacement of the two leaf springs and the floating flip head. The precise and highly sensitive tuned leaf springs work so well that they do not affect the performance of the bike or cyclist. The CF Allroad Pro Carbon Setback model offers a 25mm of setback

More support with more comfort Why not combine the best? With the GA3, the winged grip has proven its genius to the All-Mountain world. The special thing about the GP1's off-road cousin is, he locks on tight with a lightweight inner clamp. The concept combines all the relief benefits of the wing and actively supports your wrist. Your freedom of movement and the accompanying bike control remains fully intact. Riding pleasure guaranteed! What exactly are the benefits of the wings on the grips? The longer a ride is, the harder it is for a rider to maintain the ergonomically correct hand position on the bike. As a result, riders often bend their wrists too much, stressing nerves and tendons and inhibiting blood circulation. Numbness and pain in your hands are often the undesirable consequences. The GA3 grip optimizes the hand position through the Miniwings and prevents over-bending in your wrist. What is the carpal tunnel? The carpal tunnel is an anatomic passage in your wrist for nerves and tendons running from the lower arm to the hand. If the wrist is bent too much the nerves become constricted, which often leads to pain and numbness. The GA3 with Miniwing is based on the well-established and proven design of the MTB-specific GA2 grips. The particular shape of the grips provides you with great comfort and grip, without compromising the freedom of movement. This allows you to have all the control you need to tackle the most demanding of trails with full confidence. As an ergonomically perfected expansion of the GA-series by Ergon, the primary purpose GA3 grips is to provide relief out in the trail. But, they're not only perfect for the MTB category, they are also ideal on fitness-oriented and urban bikes. The ergonomic winged-grip GA3 is available in five striking colors. Ergon grips don't just feel great, they look great, too!

- Ergonomic design - Dual density gel padding - 135mm width

- Ergonomic design - Simple and durable - 135mm width

- Forged alloy construction - Adjusts from 0 to +/- 60° - 31.8mm, shims included to fit 25.4mm handlebar

- Large Resin toe clip design - For road, hybrid or mountain pedal use - Fits most pedals that allow toe clip mounting - Hardware included

- Raises the height of the handlebar on a threadless stem - Made of 6061 aluminium - Height gain: 50-80mm - 217g - 28.6mm

- 7075 alloy construction with Cr-Mo bolt - Allows threadless stem use on threaded fork - Designed to work with 1-1/8" threadless stems - Converts a 1" threaded fork to 1-1/8" threadless - Provides 1" of additional height extension

- 55mm Shimano compatible road brake pads - Dura-Ace and Ultegra compatible