Other

These inline cross brake levers have super-smooth Delrin bushings, a hinged clamp, drilled-out lever bodies for lighter weight and grip, and angled cable routing to make setup and operation a breeze. They’re designed for 31.8mm handlebars, but with All-City Cross Lever shims (sold separately) they’ll work perfectly with 26.0 as well. - For use as in-line, secondary brake levers in addition to standard road brake levers - Hinged clamp fits 31.8 bars; shims for 26.0 sold separately (BR8121) - Cantilever and caliper brake compatible

- Includes stainless bolts - Fits 160mm front and 140mm rear rotors

Campagnolo Cassette Spacers

Replacement inserts for Thudbuster G4 suspension seatposts. - Cane Creek ST G4 Elastomer Insert -Soft

A higher quality spring greatly improves the performance of your coil shock. VALT springs from Cane Creek are much lighter than traditional steel springs while pushing the boundaries of performance and durability. - Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks - Also compatible with Manitou, Marzocchi, XFusion, ELKA/MRP, BOS and DSP - Compatible with Fox coil shocks with required spring clip adaptor

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240 Disc Ring Nut

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240s Shim Ring

Service your DT Swiss star ratchet hubs and wheels with DT Swiss Ratchet and Kits. - DT Swiss Star Ratchet Kit - 54T

Ratchet freehub bodies have a gloss finish and don't have a seal, as this is fixed on the hub shell. The Ratchet System was the first of this type for DT Swiss; used in the mid-range products like the 350 hubs. Includes end cap for 12 x 142 and 12 x 148mm hubs Fits Shimano 12-speed Micro Spline cassettes Crafted from lightweight aluminum Compatible with 12mm thru-axles

- Clamps to a threadless steerer - Offers up to 4-1/2" stem height increase - Forged 6061-aluminum provides extra strength - Machined aluminum top cap is threaded, providing easy installation

Dimension Basic Track Cog Lockring with 1.29-inch x 24 tpi left-hand thread. - Stainless steel - Fits all but Campagnolo and Miche hubs - Not compatible with Phil Wood hubs

Dimension Stem Column Adaptors - Total quill length 180mm - Measurement from minimum insertion to top of steerer adaptor is 118mm - Alloy - Quill insertion diameter: 1-inch

- Grade 10 chromium steel balls

- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity

- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity

- Raises the height of the handlebar on a threadless stem - Made of 6061 aluminium - Height gain: 50-80mm - 217g - 28.6mm

- 7075 alloy construction with Cr-Mo bolt - Allows threadless stem use on threaded fork - Designed to work with 1-1/8" threadless stems - Converts a 1" threaded fork to 1-1/8" threadless - Provides 1" of additional height extension

Air spring seal kits for Fox suspension repair and rebuild.

Rebuild seal kits for Fox rear suspension service and repair. - Includes parts needed for rebuild

Dirt and grime have no place in your bottom bracket. Keep them at bay by always ensuring your FSA BB30 Bearing Covers are in good shape. Keep a replacement set on hand to extend the life of your expensive, silky-smooth BB30 bottom bracket.

This is an FSA MegaExo Crank Arm Fixing Bolt for MegaExo Cranks. - 26mm length - 12g - Designed to fit FSA cranks only - Includes M18 bolt, M27 self-extracting cap and washers

This is an FSA MegaExo Crank Arm Bolt for 19mm MegaExo alloy cranks - Designed to fit alloy FSA cranks only - Includes M12 bolt, M27 self-extracting cap, and washers

This is an FSA MegaExo Crank Arm Bolt for 24mm MegaExo alloy cranks - Designed to fit alloy FSA cranks only - Includes M17 bolt, M27 self-extracting cap, and washers

- Mega Exo right hand threaded (RH) hollow carbon screws with a self-extracting cap - Designed to fit FSA MegaExo Cranks only - Includes bolt, self-extracting cap, and washers

FSA Crank Arm Fixing Bolts - Self-extracting crank bolt - 15mm

Hope Disc Brake adaptors are CNC-machined and ensure a perfect fit with all Hope Brake sets. - CNC machined in Barnoldswick, England - Includes mounting bolts

KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs. - Compatible with Shimano, SRAM, and KMC 11-speed chains

- Missing links to make chain installation, maintenance and reparation easier - Card of 2

- Missing links to make chain installation, maintenance and reparation easier - Card of 2