Filter By:

Paul Component Engineering

(18 matches)
Paul Component Engineering Tall And Handsome Seatpost
$140.00
- Nice looking seatpost is built to the highest standards for function and ease of use - Head and shaft are made from a special high strength 2024 aluminum alloy - Two bolt head offers roughly 15 degrees of tilt adjustment - 26mm clamp setback. 320g - Made in the USA
Paul Component Engineering Road Cranks
$275.00
- CNC machined crankarms and chainwheel - *BB sold separately: recommended for use with 110.5 or 111mm ISO bottom bracket (crank is extra narrow and will not fit all frames, check before installation) - 655g
Paul Component Engineering Fatbike Quick Release Skewers
$50.00
- Stainless steel shafts screw into orange 7075 aluminum heads, putting the material where it's needed and not where it isn't - Nuts have a matching o-ring and a thread friction element to keep them in place after wheels are removed - Use standard rear quick release skewers for front FatBike applications
Paul Component Engineering Boxcar Stem
$89.00
The Boxcar Stem from Paul Components is the perfect combination of stiffness, strength, and reasonable weight. All screws are high-strength stainless steel with the popular T25 head. Made in Chico, California with US sourced 2024 aircraft alloy. - Stack height: 36mm - Weight: 155g (90mm)
Paul Component Engineering Stem Cap GoPro Mount
$49.00
- Designed to securely attach a GoPro camera to the top of a 1-1/8" threadless stem - The Camera Mount can be attached directly to the camera's case for a solid connection, or can be fitted with an articulated GoPro Pivot Arm for more adjustability - Compatible with all HERO3, HERO2, and HD HERO Original GoPro cameras - Made in USA
Paul Component Engineering Track Lock Ring
$37.00
- Machined stainless steel lock ring, extra wide to prevent stripping - Stepped inner edge to tighten even narrow cogs (minimum size 13t) - Made in USA
Paul Component Engineering Disc WORD Rear Hub
$182.00
- Adjustable double sealed cartridge bearings and labyrinth seals - Wide canted flanges build a no dish wheel - Large 8mm bolts and knurled washer face for maximum hold - Accepts 24tpi BMX freewheels. 300g - 32-hole - Made in USA
Paul Component Engineering Funky Monkey Front Cable Hanger
$49.00
- Cable stop for front centerpull and cantilever brakes - Integrated barrel adjuster for cable tension. 26G - Made in USA
Paul Component Engineering FHUB Front Hub
$122.00
- 6061 aluminum shell with oversized 7075 aluminum axle - Adjustable double sealed cartridge bearings and labyrinth seals. 135g - Made in USA
Paul Component Engineering WORD 1-Speed Rear Hub
$140.00
- 6061 aluminum shell with oversized 7075 aluminum axle - Adjustable double sealed cartridge bearings and labyrinth seals - Wide canted flanges build a no dish wheel - Large 8mm bolts and knurled washer face for maximum hold - Accepts 24tpi BMX freewheels. 195g - 32-hole - Made in USA
Paul Component Engineering Gino Light Mount
$24.00
- The Gino Light Mount is a small perch that allows lights to be mounted to any M5 threaded eyelet, rack mount or braze-on - Made in USA
Paul Component Engineering Bottle Opener
$25.90
- This popular beverage opening tool doubles as a 15mm wrench for adjusting Paul brake spring tensioners - Made in the USA
Paul Component Engineering Motolite Linear Brake
$137.50
- Reversible 6061 aluminum arms for left or right cable routing - Quick-release noodle is lined with Teflon for smooth action - High tension square wire springs - Thinline threaded pads with easy-to-adjust arm hardware - Made in USA
Paul Component Engineering Stem Cap Light Mount
$36.00
- A great way to mount a light, computer, power meter or GPS unit in the center of a threadless stem - Made in the USA
Paul Component Engineering Neo-Retro Cyclocross Brake
$113.00 - $125.00
- Compatible with drop bar levers and short pull mountain bike levers - Modeled after the popular Mafac Tandem cantilever - Sealed pivot system with adjustable spring tension and Kool Stop pads - Recommended for standard pull (not linear pull) brake levers - Made in USA
Paul Component Engineering Melvin Chain Tensioner
$90.00
- Machined aluminum tensioner bolts on to derailleur hanger - Adjustable spring tension and dual floating pulley - For frames with vertical dropouts - Fits hubs with 22-28Mm chainline (From inside of dropout) - Made in USA
Paul Component Engineering Touring Cantilever Brake
$113.00 - $125.00
- Works well as a rear brake where the Neo-Retro may cause heel clearance problems - Compatible with drop bar levers and short pull mountain bike levers - Sealed pivot system with adjustable spring tension and Kool Stop pads - Recommended for standard pull (not linear pull) brake levers - Made in USA
Paul Component Engineering Minimoto Mini-V Brake
$129.00 - $189.90
- Mini-v brake for use with standard short pull (road) brake levers - Direct pull cantilever brake is simpler to install than a traditional cantilever brake and gives a narrow profile - Short curved arms give plenty of clearance for cyclocross tires or wide fenders - Spring tension is independently adjustable for each arm, so the brake can be precisely centered on the wheel and adjusted for return strength - Simple pivoting quick release on one arm makes it easy to open the brake to remove a wheel - Made in USA
Page 1 of 1