Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Sidi

Sidi Shot
$550.00
VENT CARBON SOLE - The VENT CARBON Sole features a light and replaceable heelpad in polyurethane to improve walkability and a replaceable integrated toe pad/vent cover. The key benefits of the VENT CARBON Sole are not only superior power transfer, because of its light weight and stiffness, but also warm weather comfort. The VENT CARBON Sole is designed with an integrated vent and air channels for heat dissipation and air flow. The vent can be opened or closed for 4-season comfort. The VENT CARBON Sole is handmade exclusively of carbon fiber in a weave pattern oriented at opposing angles that maximize stiffness while allowing for a small degree of controlled flex in the toe area. This carefully designed flex biomechanically relieves stress on the plantar tendon and helps promote circulation. The VENT CARBON Sole features a standard 3-hole drilling pattern, printed 10 mm lateral and fore/aft cleat alignment scale as well as the Look Memory Eyelet for easy cleat alignment and replacement. For triathlon, the vent also serves as a water drain, dramatically improving foot comfort after a wet transition. REPLACEABLE HEEL PAD - For walkability, Sidi cycling shoes include a replaceable polyurethane heel pad. SHOT’s heel pad has a new design and it is very light. DOUBLE TECNO-3 PUSH - The DOUBLE TECNO 3 PUSH SYSTEM is inserted on a single base, this speeds up wearing and taking off shoes. The central mechanism creates a perfect tension balance between the shoe’s internal and external side. The symmetrical mechanism guarantees an excellent closure adapting on every instep. An innovative button added to the monofilament buckle, if pushed, lifts the buckle to facilitate the adjustment. REFLEX ADJUSTABLE HEEL RETENTION DEVICE - The ADJUSTABLE HEEL RETENTION DEVICE reinforces the top of the heel cup and improves the fit by closing the back of the shoe securely around the rider’s heel. The heel retention device tightens the top of the heel cup so that the heel doesn’t slide out during steep climbs or sprints. Each side of the heel can be adjusted independently, for a perfect fit. For a custom adjustment turn the screw towards the + sign to tighten the heel retention device and towards the – sign to open it. Light weight, easy to use, and replaceable. For additional security while pedaling, the new adjustable heel device is provided with reflex inserts for more visibility in dark conditions. SIDI HEEL CUP - Reinforced cup that stabilizes and supports the heel. Anatomically shaped plastic, reduces heel slip and provides increased power transfer. Provides additional foot protection in the event of a crash.
Sidi MTB Tiger
$549.99
MTB CARBON-GROUND SOLE - The MTB SRS CARBON-GROUND Sole raises the standard for mountain bike performance, dropping off about 100 grams per pair compared to the previous Dragon Carbon SRS sole without sacrificing power or durability. The MTB SRS CARBON GROUND Sole consists of replaceable tread blocks in the toe and heel attached to a medium-modulus carbon sole, plus the innovative Replaceable MTB Plate, designed to prevent sole damage from pedal contact. Most Dual-Retention Bar type MTB Pedals (such as Crankbrothers and LOOK) recommend using a reinforcement plate between the cleat and the shoe in order to prevent cracking or denting the sole. The MTB Plate can be replaced in case of damage from the pedal system, so adding the weight of an aftermarket reinforcement plate is optional. The Ground SRS treads and MTB Plate are easily removable and replaceable. The MTB SRS CARBON-GROUND Sole is toe-spike compatible. DOUBLE TECNO-3 PUSH - The DOUBLE TECNO 3 PUSH SYSTEM is inserted on a single base, this speeds up wearing and taking off shoes. The central mechanism creates a perfect tension balance between the shoe’s internal and external side. The symmetrical mechanism guarantees an excellent closure adapting on every instep. An innovative button added to the monofilament buckle, if pushed, lifts the buckle to facilitate the adjustment. REFLEX ADJUSTABLE HEEL RETENTION DEVICE - The ADJUSTABLE HEEL RETENTION DEVICE reinforces the top of the heel cup and improves the fit by closing the back of the shoe securely around the rider’s heel. The heel retention device tightens the top of the heel cup so that the heel doesn’t slide out during steep climbs or sprints. Each side of the heel can be adjusted independently, for a perfect fit. For a custom adjustment turn the screw towards the + sign to tighten the heel retention device and towards the – sign to open it. Light weight, easy to use, and replaceable. For additional security while pedaling, the new adjustable heel device is provided with reflex inserts for more visibility in dark conditions. SIDI HEEL CUP - Reinforced cup that stabilizes and supports the heel. Anatomically shaped plastic, reduces heel slip and provides increased power transfer. Provides additional foot protection in the event of a crash.
Sidi MTB Drako Carbon SRS
$499.99
MTB CARBON-GROUND SOLE - The MTB SRS CARBON-GROUND Sole raises the standard for mountain bike performance, dropping off about 100 grams per pair compared to the previous Dragon Carbon SRS sole without sacrificing power or durability. The MTB SRS CARBON-GROUND Sole consists of replaceable tread blocks in the toe and heel attached to a medium-modulus carbon sole, plus the innovative Replaceable MTB Plate, designed to prevent sole damage from pedal contact. Most Dual-Retention Bar type MTB Pedals recommend using a reinforcement plate between the cleat and the shoe in order to prevent cracking or denting the sole. The MTB Plate can be replaced in case of damage from the pedal system, so adding the weight of an aftermarket reinforcement plate is optional. The Ground SRS treads and MTB Plate are easily removable and replaceable. The MTB SRS CARBON-GROUND Sole is toe-spike compatible. TECNO-3 PUSH - SIDI’s TECHNO-3 PUSH dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit. SIDI’s famously reliable and replaceable closures are improved by a proprietary SIDI Wire material that is completely non-binding for intuitive and effortless on-the-fly adjustments. Like most SIDI small parts, the TECHNO-3 PUSH buckle is serviceable and replaceable. It can be adjusted while riding, thanks to an innovative button which can be pushed to lift the buckle and facilitate the adjustment. SOFT INSTEP CLOSURE SYSTEM - The SOFT INSTEP CLOSURE SYSTEM is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area. The SOFT INSTEP CLOSURE SYSTEM is adjustable from both sides, to perfectly center the EVA pad over a high or low instep. The system eliminates the need for the High Instep Extender. The SOFT INSTEP CLOSURE SYSTEM is replaceable. ADJUSTABLE HEEL RETENTION DEVICE - The ADJUSTABLE HEEL RETENTION DEVICE reinforces the top of the heel cup and improves the fit by closing the back of the shoe securely around the rider’s heel. The heel retention device tightens the top of the heel cup so that the heel doesn’t slide out during steep climbs or sprints. Each side of the heel can be adjusted independently, for a perfect fit. For a custom adjustment turn the screw towards the + sign to tighten the heel retention device and towards the – sign to open it. Light weight, easy to use, and replaceable.
Sidi MTB Drako Carbon SRS Woman
$499.99
MTB CARBON-GROUND SOLE - The MTB SRS CARBON-GROUND Sole raises the standard for mountain bike performance, dropping off about 100 grams per pair compared to the previous Dragon Carbon SRS sole without sacrificing power or durability. The MTB SRS CARBON-GROUND Sole consists of replaceable tread blocks in the toe and heel attached to a medium-modulus carbon sole, plus the innovative Replaceable MTB Plate, designed to prevent sole damage from pedal contact. Most Dual-Retention Bar type MTB Pedals (such as Crankbrothers and LOOK) recommend using a reinforcement plate between the cleat and the shoe in order to prevent cracking or denting the sole. The MTB Plate can be replaced in case of damage from the pedal system, so adding the weight of an aftermarket reinforcement plate is optional. The Ground SRS treads and MTB Plate are easily removable and replaceable. The MTB SRS CARBON-GROUND Sole is toe-spike compatible. TECNO-3 PUSH - SIDI’s TECHNO-3 PUSH dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit. SIDI’s famously reliable and replaceable closures are improved by an all new proprietary SIDI Wire material that is completely non-binding for intuitive and effortless on-the-fly adjustments. Like most SIDI small parts, the TECHNO-3 PUSH buckle is serviceable and replaceable. It can be adjusted while riding, thanks to an innovative button which can be pushed to lift the buckle and facilitate the adjustment. SOFT INSTEP CLOSURE SYSTEM - The SOFT INSTEP CLOSURE SYSTEM is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area. The SOFT INSTEP CLOSURE SYSTEM is adjustable from both sides, to perfectly center the EVA pad over a high or low instep. The system eliminates the need for the High Instep Extender. The SOFT INSTEP CLOSURE SYSTEM is replaceable. ADJUSTABLE HEEL RETENTION DEVICE - The ADJUSTABLE HEEL RETENTION DEVICE reinforces the top of the heel cup and improves the fit by closing the back of the shoe securely around the rider’s heel. The heel retention device tightens the top of the heel cup so that the heel doesn’t slide out during steep climbs or sprints. Each side of the heel can be adjusted independently, for a perfect fit. For a custom adjustment turn the screw towards the + sign to tighten the heel retention device and towards the – sign to open it. Light weight, easy to use, and replaceable. SIDI HEEL CUP - Reinforced cup that stabilizes and supports the heel. Anatomically shaped plastic, reduces heel slip and provides increased power transfer. Provides additional foot protection in the event of a crash. RUBBER TOE - Upper part of the toe section is rubberized to resist and deflect impacts from stones or debris when cycling. It is made with anti-slip rubber.
Sidi Wire Carbon Air White
$499.99
- Microfibra TechPro is a microfiber PU Made in Italy. It is considered a highly technological and innovative, eco-friendly leather suitable for technical and sports products which require high performance levels. Performa TechPro incorporates features of resistancy, stability, lightness, transpirability, water-repellency and eco-friendliness. Performa TechPro microfiber is Oeko-Tex certified, does not contain harmful substances and respects the limits of the law. - The SOFT INSTEP CLOSURE SYSTEM is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area. The SOFT INSTEP CLOSURE SYSTEM is adjustable from both sides, to perfectly center the EVA pad over a high or low instep. The system eliminates the need for the High Instep Extender. The SOFT INSTEP CLOSURE SYSTEM is replaceable. - SIDI’s TECHNO-3 PUSH dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit. SIDI’s famously reliable and replaceable closures are improved by a proprietary SIDI Wire material that is completely non-binding for intuitive and effortless on-the-fly adjustments. Like most SIDI small parts, the TECHNO-3 PUSH buckle is serviceable and replaceable. It can be adjusted while riding, thanks to an innovative button which can be pushed to lift the buckle and facilitate the adjustment. - The ADJUSTABLE HEEL RETENTION DEVICE reinforces the top of the heel cup and improves the fit by closing the back of the shoe securely around the rider’s heel. The heel retention device tightens the top of the heel cup so that the heel doesn’t slide out during steep climbs or sprints. Each side of the heel can be adjusted independently, for a perfect fit. For a custom adjustment turn the screw towards the + sign to tighten the heel retention device and towards the – sign to open it. Light weight, easy to use, and replaceable. - The reinforced heel keeps the foot in a optimal position and avoids the shoe being deformed by extreme performance or prolonged pressure. - For walkability, Sidi cycling shoes include a replaceable polyurethane heel pad. - The VENT CARBON SOLE features a light and replaceable heelpad to improve walkability in polyurethane and a replaceable integrated toe pad/vent cover. The key benefits of the VENT CARBON SOLE are not only superior power transfer, because of its light weight and stiffness, but also warm weather comfort. The VENT CARBON SOLE is designed with an integrated vent and air channels for heat dissipation and air flow. The vent can be opened or closed for 4-season comfort. The VENT CARBON SOLE is handmade exclusively of carbon fiber in a weave pattern oriented at opposing angles that maximize stiffness while allowing for a small degree of controlled flex in the toe area. This carefully designed flex biomechanically relieves stress on the plantar tendon and helps promote circulation. The VENT CARBON SOLE features a standard 3-hole drilling pattern, printed 10 mm lateral and fore/aft cleat alignment scale as well as the Look Memory Eyelet for easy cleat alignment and replacement. For triathlon, the vent also serves as a water drain, dramatically improving foot comfort after a wet transition.
Sidi Wire Carbon Air Woman
$499.99
VENT CARBON SOLE - The VENT CARBON Sole features a light and replaceable heelpad in polyurethane to improve walkability and a replaceable integrated toe pad/vent cover. The key benefits of the VENT CARBON Sole are not only superior power transfer, because of its light weight and stiffness, but also warm weather comfort. The VENT CARBON Sole is designed with an integrated vent and air channels for heat dissipation and air flow. The vent can be opened or closed for 4-season comfort. The VENT CARBON Sole is handmade exclusively of carbon fiber in a weave pattern oriented at opposing angles that maximize stiffness while allowing for a small degree of controlled flex in the toe area. This carefully designed flex biomechanically relieves stress on the plantar tendon and helps promote circulation. The VENT CARBON Sole features a standard 3-hole drilling pattern, printed 10 mm lateral and fore/aft cleat alignment scale as well as the Look Memory Eyelet for easy cleat alignment and replacement. For triathlon, the vent also serves as a water drain, dramatically improving foot comfort after a wet transition. TECNO-3 PUSH - SIDI’s TECHNO-3 PUSH dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit. SIDI’s famously reliable and replaceable closures are improved by an all new proprietary SIDI Wire material that is completely non-binding for intuitive and effortless on-the-fly adjustments. Like most SIDI small parts, the TECHNO-3 PUSH buckle is serviceable and replaceable. It can be adjusted while riding, thanks to an innovative button which can be pushed to lift the buckle and facilitate the adjustment. SOFT INSTEP CLOSURE SYSTEM - The SOFT INSTEP CLOSURE SYSTEM is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area. The SOFT INSTEP CLOSURE SYSTEM is adjustable from both sides, to perfectly center the EVA pad over a high or low instep. The system eliminates the need for the High Instep Extender. The SOFT INSTEP CLOSURE SYSTEM is replaceable. ADJUSTABLE HEEL RETENTION DEVICE - The ADJUSTABLE HEEL RETENTION DEVICE reinforces the top of the heel cup and improves the fit by closing the back of the shoe securely around the rider’s heel. The heel retention device tightens the top of the heel cup so that the heel doesn’t slide out during steep climbs or sprints. Each side of the heel can be adjusted independently, for a perfect fit. For a custom adjustment turn the screw towards the + sign to tighten the heel retention device and towards the – sign to open it. Light weight, easy to use, and replaceable. SIDI HEEL CUP - Reinforced cup that stabilizes and supports the heel. Anatomically shaped plastic, reduces heel slip and provides increased power transfer. Provides additional foot protection in the event of a crash. REPLACEABLE HEEL PAD - For walkability, Sidi cycling shoes include a replaceable polyurethane heel pad.
Sidi Wire Carbon Black
$499.99
VENT CARBON SOLE - The VENT CARBON Sole features a light and replaceable heelpad in polyurethane to improve walkability and a replaceable integrated toe pad/vent cover. The key benefits of the VENT CARBON Sole are not only superior power transfer, because of its light weight and stiffness, but also warm weather comfort. The VENT CARBON Sole is designed with an integrated vent and air channels for heat dissipation and air flow. The vent can be opened or closed for 4-season comfort. The VENT CARBON Sole is handmade exclusively of carbon fiber in a weave pattern oriented at opposing angles that maximize stiffness while allowing for a small degree of controlled flex in the toe area. This carefully designed flex biomechanically relieves stress on the plantar tendon and helps promote circulation. The VENT CARBON Sole features a standard 3-hole drilling pattern, printed 10 mm lateral and fore/aft cleat alignment scale as well as the Look Memory Eyelet for easy cleat alignment and replacement. For triathlon, the vent also serves as a water drain, dramatically improving foot comfort after a wet transition. TECNO-3 PUSH - SIDI’s TECHNO-3 PUSH dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit. SIDI’s famously reliable and replaceable closures are improved by an all new proprietary SIDI Wire material that is completely non-binding for intuitive and effortless on-the-fly adjustments. Like most SIDI small parts, the TECHNO-3 PUSH buckle is serviceable and replaceable. It can be adjusted while riding, thanks to an innovative button which can be pushed to lift the buckle and facilitate the adjustment. SOFT INSTEP CLOSURE SYSTEM - The SOFT INSTEP CLOSURE SYSTEM is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area. The SOFT INSTEP CLOSURE SYSTEM is adjustable from both sides, to perfectly center the EVA pad over a high or low instep. The system eliminates the need for the High Instep Extender. The SOFT INSTEP CLOSURE SYSTEM is replaceable. ADJUSTABLE HEEL RETENTION DEVICE - The ADJUSTABLE HEEL RETENTION DEVICE reinforces the top of the heel cup and improves the fit by closing the back of the shoe securely around the rider’s heel. The heel retention device tightens the top of the heel cup so that the heel doesn’t slide out during steep climbs or sprints. Each side of the heel can be adjusted independently, for a perfect fit. For a custom adjustment turn the screw towards the + sign to tighten the heel retention device and towards the – sign to open it. Light weight, easy to use, and replaceable. SIDI HEEL CUP - Reinforced cup that stabilizes and supports the heel. Anatomically shaped plastic, reduces heel slip and provides increased power transfer. Provides additional foot protection in the event of a crash. REPLACEABLE HEEL PAD - For walkability, Sidi cycling shoes include a replaceable polyurethane heel pad.
Sidi Wire Carbon Black/Yellow Fluo
$499.99
VENT CARBON SOLE - The VENT CARBON Sole features a light and replaceable heelpad in polyurethane to improve walkability and a replaceable integrated toe pad/vent cover. The key benefits of the VENT CARBON Sole are not only superior power transfer, because of its light weight and stiffness, but also warm weather comfort. The VENT CARBON Sole is designed with an integrated vent and air channels for heat dissipation and air flow. The vent can be opened or closed for 4-season comfort. The VENT CARBON Sole is handmade exclusively of carbon fiber in a weave pattern oriented at opposing angles that maximize stiffness while allowing for a small degree of controlled flex in the toe area. This carefully designed flex biomechanically relieves stress on the plantar tendon and helps promote circulation. The VENT CARBON Sole features a standard 3-hole drilling pattern, printed 10 mm lateral and fore/aft cleat alignment scale as well as the Look Memory Eyelet for easy cleat alignment and replacement. For triathlon, the vent also serves as a water drain, dramatically improving foot comfort after a wet transition. TECNO-3 PUSH - SIDI’s TECHNO-3 PUSH dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit. SIDI’s famously reliable and replaceable closures are improved by an all new proprietary SIDI Wire material that is completely non-binding for intuitive and effortless on-the-fly adjustments. Like most SIDI small parts, the TECHNO-3 PUSH buckle is serviceable and replaceable. It can be adjusted while riding, thanks to an innovative button which can be pushed to lift the buckle and facilitate the adjustment. SOFT INSTEP CLOSURE SYSTEM - The SOFT INSTEP CLOSURE SYSTEM is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area. The SOFT INSTEP CLOSURE SYSTEM is adjustable from both sides, to perfectly center the EVA pad over a high or low instep. The system eliminates the need for the High Instep Extender. The SOFT INSTEP CLOSURE SYSTEM is replaceable. ADJUSTABLE HEEL RETENTION DEVICE - The ADJUSTABLE HEEL RETENTION DEVICE reinforces the top of the heel cup and improves the fit by closing the back of the shoe securely around the rider’s heel. The heel retention device tightens the top of the heel cup so that the heel doesn’t slide out during steep climbs or sprints. Each side of the heel can be adjusted independently, for a perfect fit. For a custom adjustment turn the screw towards the + sign to tighten the heel retention device and towards the – sign to open it. Light weight, easy to use, and replaceable. SIDI HEEL CUP - Reinforced cup that stabilizes and supports the heel. Anatomically shaped plastic, reduces heel slip and provides increased power transfer. Provides additional foot protection in the event of a crash. REPLACEABLE HEEL PAD - For walkability, Sidi cycling shoes include a replaceable polyurethane heel pad.
Sidi Wire Carbon Matte Black/White
$499.99
VENT CARBON SOLE - The VENT CARBON Sole features a light and replaceable heelpad in polyurethane to improve walkability and a replaceable integrated toe pad/vent cover. The key benefits of the VENT CARBON Sole are not only superior power transfer, because of its light weight and stiffness, but also warm weather comfort. The VENT CARBON Sole is designed with an integrated vent and air channels for heat dissipation and air flow. The vent can be opened or closed for 4-season comfort. The VENT CARBON Sole is handmade exclusively of carbon fiber in a weave pattern oriented at opposing angles that maximize stiffness while allowing for a small degree of controlled flex in the toe area. This carefully designed flex biomechanically relieves stress on the plantar tendon and helps promote circulation. The VENT CARBON Sole features a standard 3-hole drilling pattern, printed 10 mm lateral and fore/aft cleat alignment scale as well as the Look Memory Eyelet for easy cleat alignment and replacement. For triathlon, the vent also serves as a water drain, dramatically improving foot comfort after a wet transition. TECNO-3 PUSH - SIDI’s TECHNO-3 PUSH dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit. SIDI’s famously reliable and replaceable closures are improved by an all new proprietary SIDI Wire material that is completely non-binding for intuitive and effortless on-the-fly adjustments. Like most SIDI small parts, the TECHNO-3 PUSH buckle is serviceable and replaceable. It can be adjusted while riding, thanks to an innovative button which can be pushed to lift the buckle and facilitate the adjustment. SOFT INSTEP CLOSURE SYSTEM - The SOFT INSTEP CLOSURE SYSTEM is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area. The SOFT INSTEP CLOSURE SYSTEM is adjustable from both sides, to perfectly center the EVA pad over a high or low instep. The system eliminates the need for the High Instep Extender. The SOFT INSTEP CLOSURE SYSTEM is replaceable. ADJUSTABLE HEEL RETENTION DEVICE - The ADJUSTABLE HEEL RETENTION DEVICE reinforces the top of the heel cup and improves the fit by closing the back of the shoe securely around the rider’s heel. The heel retention device tightens the top of the heel cup so that the heel doesn’t slide out during steep climbs or sprints. Each side of the heel can be adjusted independently, for a perfect fit. For a custom adjustment turn the screw towards the + sign to tighten the heel retention device and towards the – sign to open it. Light weight, easy to use, and replaceable. SIDI HEEL CUP - Reinforced cup that stabilizes and supports the heel. Anatomically shaped plastic, reduces heel slip and provides increased power transfer. Provides additional foot protection in the event of a crash. REPLACEABLE HEEL PAD - For walkability, Sidi cycling shoes include a replaceable polyurethane heel pad.
Sidi Wire Carbon Orange/Black
$499.99
VENT CARBON SOLE - The VENT CARBON Sole features a light and replaceable heelpad in polyurethane to improve walkability and a replaceable integrated toe pad/vent cover. The key benefits of the VENT CARBON Sole are not only superior power transfer, because of its light weight and stiffness, but also warm weather comfort. The VENT CARBON Sole is designed with an integrated vent and air channels for heat dissipation and air flow. The vent can be opened or closed for 4-season comfort. The VENT CARBON Sole is handmade exclusively of carbon fiber in a weave pattern oriented at opposing angles that maximize stiffness while allowing for a small degree of controlled flex in the toe area. This carefully designed flex biomechanically relieves stress on the plantar tendon and helps promote circulation. The VENT CARBON Sole features a standard 3-hole drilling pattern, printed 10 mm lateral and fore/aft cleat alignment scale as well as the Look Memory Eyelet for easy cleat alignment and replacement. For triathlon, the vent also serves as a water drain, dramatically improving foot comfort after a wet transition. TECNO-3 PUSH - SIDI’s TECHNO-3 PUSH dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit. SIDI’s famously reliable and replaceable closures are improved by an all new proprietary SIDI Wire material that is completely non-binding for intuitive and effortless on-the-fly adjustments. Like most SIDI small parts, the TECHNO-3 PUSH buckle is serviceable and replaceable. It can be adjusted while riding, thanks to an innovative button which can be pushed to lift the buckle and facilitate the adjustment. SOFT INSTEP CLOSURE SYSTEM - The SOFT INSTEP CLOSURE SYSTEM is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area. The SOFT INSTEP CLOSURE SYSTEM is adjustable from both sides, to perfectly center the EVA pad over a high or low instep. The system eliminates the need for the High Instep Extender. The SOFT INSTEP CLOSURE SYSTEM is replaceable. ADJUSTABLE HEEL RETENTION DEVICE - The ADJUSTABLE HEEL RETENTION DEVICE reinforces the top of the heel cup and improves the fit by closing the back of the shoe securely around the rider’s heel. The heel retention device tightens the top of the heel cup so that the heel doesn’t slide out during steep climbs or sprints. Each side of the heel can be adjusted independently, for a perfect fit. For a custom adjustment turn the screw towards the + sign to tighten the heel retention device and towards the – sign to open it. Light weight, easy to use, and replaceable. SIDI HEEL CUP - Reinforced cup that stabilizes and supports the heel. Anatomically shaped plastic, reduces heel slip and provides increased power transfer. Provides additional foot protection in the event of a crash. REPLACEABLE HEEL PAD - For walkability, Sidi cycling shoes include a replaceable polyurethane heel pad.
Sidi Wire Carbon Sky Blue/Black/Red
$499.99
VENT CARBON SOLE - The VENT CARBON Sole features a light and replaceable heelpad in polyurethane to improve walkability and a replaceable integrated toe pad/vent cover. The key benefits of the VENT CARBON Sole are not only superior power transfer, because of its light weight and stiffness, but also warm weather comfort. The VENT CARBON Sole is designed with an integrated vent and air channels for heat dissipation and air flow. The vent can be opened or closed for 4-season comfort. The VENT CARBON Sole is handmade exclusively of carbon fiber in a weave pattern oriented at opposing angles that maximize stiffness while allowing for a small degree of controlled flex in the toe area. This carefully designed flex biomechanically relieves stress on the plantar tendon and helps promote circulation. The VENT CARBON Sole features a standard 3-hole drilling pattern, printed 10 mm lateral and fore/aft cleat alignment scale as well as the Look Memory Eyelet for easy cleat alignment and replacement. For triathlon, the vent also serves as a water drain, dramatically improving foot comfort after a wet transition. TECNO-3 PUSH - SIDI’s TECHNO-3 PUSH dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit. SIDI’s famously reliable and replaceable closures are improved by an all new proprietary SIDI Wire material that is completely non-binding for intuitive and effortless on-the-fly adjustments. Like most SIDI small parts, the TECHNO-3 PUSH buckle is serviceable and replaceable. It can be adjusted while riding, thanks to an innovative button which can be pushed to lift the buckle and facilitate the adjustment. SOFT INSTEP CLOSURE SYSTEM - The SOFT INSTEP CLOSURE SYSTEM is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area. The SOFT INSTEP CLOSURE SYSTEM is adjustable from both sides, to perfectly center the EVA pad over a high or low instep. The system eliminates the need for the High Instep Extender. The SOFT INSTEP CLOSURE SYSTEM is replaceable. ADJUSTABLE HEEL RETENTION DEVICE - The ADJUSTABLE HEEL RETENTION DEVICE reinforces the top of the heel cup and improves the fit by closing the back of the shoe securely around the rider’s heel. The heel retention device tightens the top of the heel cup so that the heel doesn’t slide out during steep climbs or sprints. Each side of the heel can be adjusted independently, for a perfect fit. For a custom adjustment turn the screw towards the + sign to tighten the heel retention device and towards the – sign to open it. Light weight, easy to use, and replaceable. SIDI HEEL CUP - Reinforced cup that stabilizes and supports the heel. Anatomically shaped plastic, reduces heel slip and provides increased power transfer. Provides additional foot protection in the event of a crash. REPLACEABLE HEEL PAD - For walkability, Sidi cycling shoes include a replaceable polyurethane heel pad.
Sidi Wire Carbon Sky Blue/White
$499.99
- Microfibra TechPro is a microfiber PU Made in Italy. It is considered a highly technological and innovative, eco-friendly leather suitable for technical and sports products which require high performance levels. Performa TechPro incorporates features of resistancy, stability, lightness, transpirability, water-repellency and eco-friendliness. Performa TechPro microfiber is Oeko-Tex certified, does not contain harmful substances and respects the limits of the law. - The SOFT INSTEP CLOSURE SYSTEM is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area. The SOFT INSTEP CLOSURE SYSTEM is adjustable from both sides, to perfectly center the EVA pad over a high or low instep. The system eliminates the need for the High Instep Extender. The SOFT INSTEP CLOSURE SYSTEM is replaceable. - SIDI’s TECHNO-3 PUSH dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit. SIDI’s famously reliable and replaceable closures are improved by a proprietary SIDI Wire material that is completely non-binding for intuitive and effortless on-the-fly adjustments. Like most SIDI small parts, the TECHNO-3 PUSH buckle is serviceable and replaceable. It can be adjusted while riding, thanks to an innovative button which can be pushed to lift the buckle and facilitate the adjustment. - The ADJUSTABLE HEEL RETENTION DEVICE reinforces the top of the heel cup and improves the fit by closing the back of the shoe securely around the rider’s heel. The heel retention device tightens the top of the heel cup so that the heel doesn’t slide out during steep climbs or sprints. Each side of the heel can be adjusted independently, for a perfect fit. For a custom adjustment turn the screw towards the + sign to tighten the heel retention device and towards the – sign to open it. Light weight, easy to use, and replaceable. - The reinforced heel keeps the foot in a optimal position and avoids the shoe being deformed by extreme performance or prolonged pressure. - For walkability, Sidi cycling shoes include a replaceable polyurethane heel pad. - The VENT CARBON SOLE features a light and replaceable heelpad to improve walkability in polyurethane and a replaceable integrated toe pad/vent cover. The key benefits of the VENT CARBON SOLE are not only superior power transfer, because of its light weight and stiffness, but also warm weather comfort. The VENT CARBON SOLE is designed with an integrated vent and air channels for heat dissipation and air flow. The vent can be opened or closed for 4-season comfort. The VENT CARBON SOLE is handmade exclusively of carbon fiber in a weave pattern oriented at opposing angles that maximize stiffness while allowing for a small degree of controlled flex in the toe area. This carefully designed flex biomechanically relieves stress on the plantar tendon and helps promote circulation. The VENT CARBON SOLE features a standard 3-hole drilling pattern, printed 10 mm lateral and fore/aft cleat alignment scale as well as the Look Memory Eyelet for easy cleat alignment and replacement. For triathlon, the vent also serves as a water drain, dramatically improving foot comfort after a wet transition.
Sidi Wire Carbon White
$499.99
VENT CARBON SOLE - The VENT CARBON Sole features a light and replaceable heelpad in polyurethane to improve walkability and a replaceable integrated toe pad/vent cover. The key benefits of the VENT CARBON Sole are not only superior power transfer, because of its light weight and stiffness, but also warm weather comfort. The VENT CARBON Sole is designed with an integrated vent and air channels for heat dissipation and air flow. The vent can be opened or closed for 4-season comfort. The VENT CARBON Sole is handmade exclusively of carbon fiber in a weave pattern oriented at opposing angles that maximize stiffness while allowing for a small degree of controlled flex in the toe area. This carefully designed flex biomechanically relieves stress on the plantar tendon and helps promote circulation. The VENT CARBON Sole features a standard 3-hole drilling pattern, printed 10 mm lateral and fore/aft cleat alignment scale as well as the Look Memory Eyelet for easy cleat alignment and replacement. For triathlon, the vent also serves as a water drain, dramatically improving foot comfort after a wet transition. TECNO-3 PUSH - SIDI’s TECHNO-3 PUSH dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit. SIDI’s famously reliable and replaceable closures are improved by an all new proprietary SIDI Wire material that is completely non-binding for intuitive and effortless on-the-fly adjustments. Like most SIDI small parts, the TECHNO-3 PUSH buckle is serviceable and replaceable. It can be adjusted while riding, thanks to an innovative button which can be pushed to lift the buckle and facilitate the adjustment. SOFT INSTEP CLOSURE SYSTEM - The SOFT INSTEP CLOSURE SYSTEM is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area. The SOFT INSTEP CLOSURE SYSTEM is adjustable from both sides, to perfectly center the EVA pad over a high or low instep. The system eliminates the need for the High Instep Extender. The SOFT INSTEP CLOSURE SYSTEM is replaceable. ADJUSTABLE HEEL RETENTION DEVICE - The ADJUSTABLE HEEL RETENTION DEVICE reinforces the top of the heel cup and improves the fit by closing the back of the shoe securely around the rider’s heel. The heel retention device tightens the top of the heel cup so that the heel doesn’t slide out during steep climbs or sprints. Each side of the heel can be adjusted independently, for a perfect fit. For a custom adjustment turn the screw towards the + sign to tighten the heel retention device and towards the – sign to open it. Light weight, easy to use, and replaceable. SIDI HEEL CUP - Reinforced cup that stabilizes and supports the heel. Anatomically shaped plastic, reduces heel slip and provides increased power transfer. Provides additional foot protection in the event of a crash. REPLACEABLE HEEL PAD - For walkability, Sidi cycling shoes include a replaceable polyurethane heel pad.
Sidi Wire Carbon Yellow Fluo/Blue
$499.99
VENT CARBON SOLE - The VENT CARBON Sole features a light and replaceable heelpad in polyurethane to improve walkability and a replaceable integrated toe pad/vent cover. The key benefits of the VENT CARBON Sole are not only superior power transfer, because of its light weight and stiffness, but also warm weather comfort. The VENT CARBON Sole is designed with an integrated vent and air channels for heat dissipation and air flow. The vent can be opened or closed for 4-season comfort. The VENT CARBON Sole is handmade exclusively of carbon fiber in a weave pattern oriented at opposing angles that maximize stiffness while allowing for a small degree of controlled flex in the toe area. This carefully designed flex biomechanically relieves stress on the plantar tendon and helps promote circulation. The VENT CARBON Sole features a standard 3-hole drilling pattern, printed 10 mm lateral and fore/aft cleat alignment scale as well as the Look Memory Eyelet for easy cleat alignment and replacement. For triathlon, the vent also serves as a water drain, dramatically improving foot comfort after a wet transition. TECNO-3 PUSH - SIDI’s TECHNO-3 PUSH dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit. SIDI’s famously reliable and replaceable closures are improved by an all new proprietary SIDI Wire material that is completely non-binding for intuitive and effortless on-the-fly adjustments. Like most SIDI small parts, the TECHNO-3 PUSH buckle is serviceable and replaceable. It can be adjusted while riding, thanks to an innovative button which can be pushed to lift the buckle and facilitate the adjustment. SOFT INSTEP CLOSURE SYSTEM - The SOFT INSTEP CLOSURE SYSTEM is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area. The SOFT INSTEP CLOSURE SYSTEM is adjustable from both sides, to perfectly center the EVA pad over a high or low instep. The system eliminates the need for the High Instep Extender. The SOFT INSTEP CLOSURE SYSTEM is replaceable. ADJUSTABLE HEEL RETENTION DEVICE - The ADJUSTABLE HEEL RETENTION DEVICE reinforces the top of the heel cup and improves the fit by closing the back of the shoe securely around the rider’s heel. The heel retention device tightens the top of the heel cup so that the heel doesn’t slide out during steep climbs or sprints. Each side of the heel can be adjusted independently, for a perfect fit. For a custom adjustment turn the screw towards the + sign to tighten the heel retention device and towards the – sign to open it. Light weight, easy to use, and replaceable. SIDI HEEL CUP - Reinforced cup that stabilizes and supports the heel. Anatomically shaped plastic, reduces heel slip and provides increased power transfer. Provides additional foot protection in the event of a crash. REPLACEABLE HEEL PAD - For walkability, Sidi cycling shoes include a replaceable polyurethane heel pad.
Sidi Wire SP Carbon
$499.99
SP CARBON SOLE - Carbon designed, conceived and constructed to be used with Speed Play pedals. TECNO-3 PUSH - SIDI’s TECHNO-3 PUSH dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit. SIDI’s famously reliable and replaceable closures are improved by a proprietary SIDI Wire material that is completely non-binding for intuitive and effortless on-the-fly adjustments. Like most SIDI small parts, the TECHNO-3 PUSH buckle is serviceable and replaceable. It can be adjusted while riding, thanks to an innovative button SOFT INSTEP CLOSURE SYSTEM - The SOFT INSTEP CLOSURE SYSTEM is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area. The SOFT INSTEP CLOSURE SYSTEM is adjustable from both sides, to perfectly center the EVA pad over a high or low instep. The system eliminates the need for the High Instep Extender. The SOFT INSTEP CLOSURE SYSTEM is replaceable. ADJUSTABLE HEEL RETENTION DEVICE - The ADJUSTABLE HEEL RETENTION DEVICE reinforces the top of the heel cup and improves the fit by closing the back of the shoe securely around the rider’s heel. The heel retention device tightens the top of the heel cup so that the heel doesn’t slide out during steep climbs or sprints. Each side of the heel can be adjusted independently, for a perfect fit. For a custom adjustment turn the screw towards the + sign to tighten the heel retention device and towards the – sign to open it. Light weight, easy to use, and replaceable. SIDI HEEL CUP - Reinforced cup that stabilizes and supports the heel. Anatomically shaped plastic, reduces heel slip and provides increased power transfer. Provides additional foot protection in the event of a crash. REPLACEABLE HEEL PAD - For walkability, Sidi cycling shoes include a replaceable polyurethane heel pad. MICROFIBRA TECHPRO - Microfibra TechPro is a microfiber PU Made in Italy. It is considered a highly technological and innovative, eco-friendly leather suitable for technical and sports products which require high performance levels. Performa TechPro incorporates features of resistancy, stability, lightness, transpirability, water-repellency and eco-friendliness. Performa TechPro microfiber is Oeko-Tex certified, does not contain harmful substances and respects the limits of the law.
Sidi Dragon 4
$399.99
MTB SRS CARBON COMPOSITE SOLE - In 1999, SIDI revolutionized mountain bike shoe design with the SOLE REPLACEMENT SYSTEM (SRS), owing mountain bikers to replace the most wear-heavy part of the shoe—the sole. The MTB SRS CARBON COMPOSITE Sole consists of four inserts screwed, easily removable and replaceable. In addition, an optional toe guard can be installed using the same screws as the insert. The SRS tread panels and screws are available as spare parts. It is toe spike compatible. TECNO-3 SYSTEM - SIDI’s TECHNO-3 SYSTEM dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit. SIDI’s famously reliable and replaceable closures are improved by a proprietary SIDI Wire material that is completely non-binding for intuitive and effortless on-the-fly adjustments. Like most SIDI small parts, the TECNO-3 SYSTEM is serviceable and replaceable. SOFT INSTEP CLOSURE SYSTEM - The SOFT INSTEP CLOSURE SYSTEM is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area. The SOFT INSTEP CLOSURE SYSTEM is adjustable from both sides, to perfectly center the EVA pad over a high or low instep. The system eliminates the need for the High Instep Extender. The SOFT INSTEP CLOSURE SYSTEM is replaceable. ADJUSTABLE HEEL RETENTION DEVICE - The ADJUSTABLE HEEL RETENTION DEVICE reinforces the top of the heel cup and improves the fit by closing the back of the shoe securely around the rider’s heel. The heel retention device tightens the top of the heel cup so that the heel doesn’t slide out during steep climbs or sprints. Each side of the heel can be adjusted independently, for a perfect fit. For a custom adjustment turn the screw towards the + sign to tighten the heel retention device and towards the – sign to open it. Lightweight, easy to use, and replaceable. Tallone Sidi - The reinforced heel keeps the foot in a optimal position and avoids the shoe being deformed by extreme performance or prolonged pressure. High Security Velcro - HIGH SECURITY VELCRO straps with integrated locking polymer teeth, that engage onto each other when the strap is closed. This feature makes the closure more secure and the strap becomes unmoveable. Microfibra Techpro - Microfibra TechPro is a microfiber PU made in Italy. It is considered a highly technological and innovative, eco-friendly leather suitable for technical and sports products which require high performance levels. Performa TechPro incorporates features of resistancy, stability, lightness, transpirability, water-repellency and eco-friendliness. Performa TechPro microfiber is Oeko-Tex certified, does not contain harmful substances and respects the limits of the law.
Sidi Ergo 4 Carbon Mega
$399.99
MEGA LAST - 4mm wider across the ball of the foot - More volume, a high instep and a wider heel cup - Mega lasts are EE/EEE width TWELVE CARBON COMPOSITE SOLE - TWELVE CARBON COMPOSITE sole is made with two different materials blended together, nylon and carbon fiber. It is made out of injected carbon fiber in a matrix of nylon. The nylon used doesn’t absorb water and doesn’t lose rigidity in hot or humid weather or as it ages. The result is a significantly lighter and stiffer sole. TECNO-3 SYSTEM - SIDI’s TECHNO-3 SYSTEM dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit. SIDI’s famously reliable and replaceable closures are improved by an a proprietary SIDI Wire material that is completely non-binding for intuitive and effortless onthe-fly adjustments. Like most SIDI small parts, the TECNO-3 SYSTEM is serviceable and replaceable. SOFT INSTEP CLOSURE SYSTEM - The SOFT INSTEP CLOSURE SYSTEM is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area. The SOFT INSTEP CLOSURE SYSTEM is adjustable from both sides, to perfectly center the EVA pad over a high or low instep. The system eliminates the need for the High Instep Extender. The SOFT INSTEP CLOSURE SYSTEM is replaceable. ADJUSTABLE HEEL RETENTION DEVICE - The ADJUSTABLE HEEL RETENTION DEVICE reinforces the top of the heel cup and improves the fit by closing the back of the shoe securely around the rider’s heel. The heel retention device tightens the top of the heel cup so that the heel doesn’t slide out during steep climbs or sprints. Each side of the heel can be adjusted independently, for a perfect fit. For a custom adjustment turn the screw towards the + sign to tighten the heel retention device and towards the – sign to open it. Light weight, easy to use, and replaceable. HIGH SECURITY VELCRO - HIGH SECURITY VELCRO straps with integrated locking polymer teeth, that engage onto each other when the strap is closed. This feature makes the closure more secure and the strap becomes unmoveable. SIDI HEEL CUP - Reinforced cup that stabilizes and supports the heel. Anatomically shaped plastic, reduces heel slip and provides increased power transfer. Provides additional foot protection in the event of a crash. The reinforced heel keeps the foot in a optimal position and avoids the shoe being deformed by extreme performance or prolonged pressure. REPLACEABLE HEEL PAD - For walkability, Sidi cycling shoes include a replaceable polyurethane heel pad. Microfibra Techpro - Microfibra TechPro is a microfiber PU Made in Italy. It is considered a highly technological and innovative, eco-friendly leather suitable for technical and sports products which require high performance levels. Performa TechPro incorporates features of resistancy, stability, lightness, transpirability, water-repellency and eco-friendliness. Performa TechPro microfiber is Oeko-Tex certified, does not contain harmful substances and respects the limits of the law.
Sidi Dragon 4 Mega
$399.00
MEGA LAST - 4mm wider across the ball of the foot - More volume, a high instep and a wider heel cup - Mega lasts are EE/EEE width MTB SRS CARBON COMPOSITE SOLE - In 1999, SIDI revolutionized mountain bike shoe design with the SOLE REPLACEMENT SYSTEM (SRS), owing mountain bikers to replace the most wear-heavy part of the shoe—the sole. The MTB SRS CARBON COMPOSITE Sole consists of four inserts screwed, easily removable and replaceable. In addition, an optional toe guard can be installed using the same screws as the insert. The SRS tread panels and screws are available as spare parts. It is toe spike compatible. TECNO-3 SYSTEM - SIDI’s TECHNO-3 SYSTEM dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit. SIDI’s famously reliable and replaceable closures are improved by a proprietary SIDI Wire material that is completely non-binding for intuitive and effortless on-the-fly adjustments. Like most SIDI small parts, the TECNO-3 SYSTEM is serviceable and replaceable. SOFT INSTEP CLOSURE SYSTEM - The SOFT INSTEP CLOSURE SYSTEM is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area. The SOFT INSTEP CLOSURE SYSTEM is adjustable from both sides, to perfectly center the EVA pad over a high or low instep. The system eliminates the need for the High Instep Extender. The SOFT INSTEP CLOSURE SYSTEM is replaceable. ADJUSTABLE HEEL RETENTION DEVICE - The ADJUSTABLE HEEL RETENTION DEVICE reinforces the top of the heel cup and improves the fit by closing the back of the shoe securely around the rider’s heel. The heel retention device tightens the top of the heel cup so that the heel doesn’t slide out during steep climbs or sprints. Each side of the heel can be adjusted independently, for a perfect fit. For a custom adjustment turn the screw towards the + sign to tighten the heel retention device and towards the – sign to open it. Lightweight, easy to use, and replaceable. Tallone Sidi - The reinforced heel keeps the foot in a optimal position and avoids the shoe being deformed by extreme performance or prolonged pressure. High Security Velcro - HIGH SECURITY VELCRO straps with integrated locking polymer teeth, that engage onto each other when the strap is closed. This feature makes the closure more secure and the strap becomes unmoveable. Microfibra Techpro - Microfibra TechPro is a microfiber PU made in Italy. It is considered a highly technological and innovative, eco-friendly leather suitable for technical and sports products which require high performance levels. Performa TechPro incorporates features of resistancy, stability, lightness, transpirability, water-repellency and eco-friendliness. Performa TechPro microfiber is Oeko-Tex certified, does not contain harmful substances and respects the limits of the law.
Sidi Ergo 4 Carbon
$399.00
TWELVE CARBON COMPOSITE SOLE - TWELVE CARBON COMPOSITE sole is made with two different materials blended together, nylon and carbon fiber. It is made out of injected carbon fiber in a matrix of nylon. The nylon used doesn’t absorb water and doesn’t lose rigidity in hot or humid weather or as it ages. The result is a significantly lighter and stiffer sole. TECNO-3 SYSTEM - SIDI’s TECHNO-3 SYSTEM dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit. SIDI’s famously reliable and replaceable closures are improved by an a proprietary SIDI Wire material that is completely non-binding for intuitive and effortless onthe-fly adjustments. Like most SIDI small parts, the TECNO-3 SYSTEM is serviceable and replaceable. SOFT INSTEP CLOSURE SYSTEM - The SOFT INSTEP CLOSURE SYSTEM is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area. The SOFT INSTEP CLOSURE SYSTEM is adjustable from both sides, to perfectly center the EVA pad over a high or low instep. The system eliminates the need for the High Instep Extender. The SOFT INSTEP CLOSURE SYSTEM is replaceable. ADJUSTABLE HEEL RETENTION DEVICE - The ADJUSTABLE HEEL RETENTION DEVICE reinforces the top of the heel cup and improves the fit by closing the back of the shoe securely around the rider’s heel. The heel retention device tightens the top of the heel cup so that the heel doesn’t slide out during steep climbs or sprints. Each side of the heel can be adjusted independently, for a perfect fit. For a custom adjustment turn the screw towards the + sign to tighten the heel retention device and towards the – sign to open it. Light weight, easy to use, and replaceable. HIGH SECURITY VELCRO - HIGH SECURITY VELCRO straps with integrated locking polymer teeth, that engage onto each other when the strap is closed. This feature makes the closure more secure and the strap becomes unmoveable. SIDI HEEL CUP - Reinforced cup that stabilizes and supports the heel. Anatomically shaped plastic, reduces heel slip and provides increased power transfer. Provides additional foot protection in the event of a crash. The reinforced heel keeps the foot in a optimal position and avoids the shoe being deformed by extreme performance or prolonged pressure. REPLACEABLE HEEL PAD - For walkability, Sidi cycling shoes include a replaceable polyurethane heel pad. Microfibra Techpro - Microfibra TechPro is a microfiber PU Made in Italy. It is considered a highly technological and innovative, eco-friendly leather suitable for technical and sports products which require high performance levels. Performa TechPro incorporates features of resistancy, stability, lightness, transpirability, water-repellency and eco-friendliness. Performa TechPro microfiber is Oeko-Tex certified, does not contain harmful substances and respects the limits of the law.
Sidi Cape Shoes
$299.99 - $324.99
Sidi does it again with their Cape mountain biking shoes. Sidi combines technological features with decades of fit and ergonomic innovations to make every day on the bike exceptionally efficient and comfortable. Maximum power transfer with enough flexibility for walking is assured with their nylon Competition soles. A custom fit is yours with the classic Sidi ratcheting buckles and Tecno 3 closure system that uses supple, low-friction wire laces for even pressure distribution and one-click adjustment for fine-tuning on the fly. And you'll love the Lorica uppers that fit like a dream and are super durable, while the grippy treads provide outstanding traction on those hike-a-bikes.
Sidi Kaos Shoes
$300.00
Sidi does it again with their Kaos Shoes. Sidi combines advanced technological features with their decades of fit and ergonomic expertise to make every day on your road bike more efficient and comfortable. Power transfer is unsurpassed with Sidi's super light and stiff carbon composite soles. And, maximum comfort comes in the form of Sidi's Tecno 3 closure system that uses supple, low-friction wire laces for even pressure distribution and one-click adjustment for fine-tuning on the fly. Plus, the supple, breathable and super-durable Lorica uppers provide a custom fit and feel you'll love.
Sidi Cape MTB
$299.99
MTB COMPETITION SOLE - Has been specifically studied for this specialty, may be fitted with two toe spikes on the front for traction in difficult and muddy conditions. The toe spikes are sold separately. CALIPER BUCKLE - SIDI’s TECHNO-3 PUSH dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit. SIDI’s famously reliable and replaceable closures are improved by a proprietary SIDI Wire material that is completely non-binding for intuitive and effortless on-the-fly adjustments. Like most SIDI small parts, the TECHNO-3 PUSH buckle is serviceable and replaceable. It can be adjusted while riding, thanks to an innovative button which can be pushed to lift the buckle and facilitate the adjustment SOFT INSTEP CLOSURE SYSTEM - The SOFT INSTEP CLOSURE SYSTEM is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area. The SOFT INSTEP CLOSURE SYSTEM is adjustable from both sides, to perfectly center the EVA pad over a high or low instep. The system eliminates the need for the High Instep Extender. The SOFT INSTEP CLOSURE SYSTEM is replaceable.
Sidi Kaos
$299.99
MILLENIUM 4 CARBON COMPOSITE SOLE - The MILLENNIUM 4 CARBON COMPOSITE SOLE features injected carbon fiber in a matrix of nylon, providing more rigidity than a standard nylon sole. The MILLENNIUM 4 CARBON COMPOSITE SOLE is also more durable, completely non-water-absorbent and mechanically stable, meaning it’s less susceptible to changes in stiffness resulting from aging, prolonged usage, and changes in temperature or humidity. An anti-slip toe insert and replaceable polyurethane heel pad are incorporated into the MILLENNIUM 4 CARBON COMPOSITE SOLE, for walkability. The MILLENNIUM 4 CARBON COMPOSITE SOLE uses a standard 3-hole drilling pattern for compatibility with the best pedal systems available, and includes a printed 10 mm lateral and fore/aft cleat alignment scale on the sole as well as the Look Memory Eyelet for easy cleat alignment and replacement. The reinforced heel keeps the foot in a optimal position and avoids the shoe being deformed by extreme performance or prolonged pressure. Tecno - 3 System - SIDI’s TECHNO-3 SYSTEM dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit. SIDI’s famously reliable and replaceable closures are improved by an all new proprietary SIDI Wire material that is completely non-binding for intuitive and effortless on-the-fly adjustments. Like most SIDI small parts, the TECNO-3 BUCKLE is serviceable and replaceable. Caliper Buckle - The micrometric closure called “CALIPER BUCKLE” is adjustable by lifting the central buckle. In order to completely open, lift together both side buckles, or push the center button to slightly loosen one tooth at the time. The system is also adjustable during a race. Soft Instep 2 - The SOFT INSTEP CLOSURE SYSTEM is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area. The SOFT INSTEP CLOSURE SYSTEM is adjustable from both sides, to perfectly center the EVA pad over a high or low instep. The system eliminates the need for the High Instep Extender. The SOFT INSTEP CLOSURE SYSTEM is replaceable. Materiale Politex - The “politex” material is constructed of several overlapping layers with different physical-mechanical properties, the compacted PVC is then coupled to two fabrics (knitted fabric + felt) that is then is film dyed for long-lasting color retention. “Politex” offers strong resistance to ripping, laceration, stretching and fading. “Politex” is made in strict compliance with European regulations and is a totally “green” product.
Sidi Kaos Air Carbon
$299.99
MILLENIUM 4 CARBON SOLE - The MILLENNIUM 4 CARBON COMPOSITE Sole features injected carbon fiber in a matrix of nylon, providing more rigidity than a standard nylon sole. The MILLENNIUM 4 CARBON COMPOSITE Sole is also more durable, completely non-water absorbent and mechanically stable, meaning it’s less susceptible to changes in stiffness resulting from aging, prolonged usage, and changes in temperature or humidity. An anti-slip toe insert and replaceable polyurethane heel pad are incorporated into the MILLENNIUM 4 CARBON COMPOSITE Sole, for walkability. The MILLENNIUM 4 CARBON COMPOSITE Sole uses a standard 3-hole drilling pattern for compatibility with the best pedal systems available, and includes a printed 10 mm lateral and fore/aft cleat alignment scale on the sole as well as the Look Memory Eyelet for easy cleat alignment and replacement. CALIPER BUCKLE - The micrometric closure called “CALIPER BUCKLE” is adjustable by lifting the central buckle. In order to completely open, lift together both side buckles, or push the center button to slightly loosen one tooth at the time. The system is also adjustable during a race. SOFT INSTEP CLOSURE SYSTEM - The SOFT INSTEP CLOSURE SYSTEM is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area. The SOFT INSTEP CLOSURE SYSTEM is adjustable from both sides, to perfectly center the EVA pad over a high or low instep. The system eliminates the need for the High Instep Extender. The SOFT INSTEP CLOSURE SYSTEM is replaceable. TECNO-3 SYSTEM - SIDI’s TECHNO-3 SYSTEM dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit. SIDI’s famously reliable and replaceable closures are improved by an all new proprietary SIDI Wire material that is completely non-binding for intuitive and effortless onthe-fly adjustments. Like most SIDI small parts, the TECNO-3 SYSTEM is serviceable and replaceable SIDI HEEL CUP - Reinforced cup that stabilizes and supports the heel. Anatomically shaped plastic, reduces heel slip and provides increased power transfer. Provides additional foot protection in the event of a crash. The reinforced heel keeps the foot in a optimal position and avoids the shoe being deformed by extreme performance or prolonged pressure REPLACEABLE HEEL PAD - For walkability, Sidi cycling shoes include a replaceable polyurethane heel pad Materiale Politex - The “politex” material is constructed of several overlapping layers with different physical-mechanical properties, the compacted PVC is then coupled to two fabrics (knitted fabric + felt) that is then is film dyed for long-lasting color retention. “Politex” offers strong resistance to ripping, laceration, stretching and fading. “Politex” is made in strict compliance with European regulations and is a totally “green” product.
Sidi MTB Frost Gore
$299.99
RS17 SOLE - Lighter and better performing, the new Sidi MTB sole is made of nylon with PU (polyurethane) inserts. The shape of the sole tread has been specifically designed for mountain bike, it allows a good grip, facilitates mud dispersion and provides the right stability. The central insert with the Sidi logo works as non-slip and it is practical and useful especially to the less experienced users. The toe area that is more subject to wear, especially when walking, can be replaced by screws and still offers the possibility to mount crampons to improve traction on particularly muddy grounds. SR17 represents the ultimate result in terms of stiffness for pedaling and flexion for walking. TECNO-3 SYSTEM - SIDI’s TECHNO-3 SYSTEM dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit. SIDI’s famously reliable and replaceable closures are improved by an all new proprietary SIDI Wire material that is completely non-binding for intuitive and effortless on-the-fly adjustments. Like most SIDI small parts, the TECNO-3 SYSTEM is serviceable and replaceable. SIDI HEEL CUP - Reinforced cup that stabilizes and supports the heel. Anatomically shaped plastic, reduces heel slip and provides increased power transfer. Provides additional foot protection in the event of a crash.
Sidi Zero Gore
$299.99
MILLENIUM 5 SOLE - The redesigned MILLENNIUM 5 SOLE is constructed from injected carbon fiber in a nylon matrix. This infusion of carbon fiber in the nylon increases sole stiffness and durability, ensuring optimum performance in the face of prolonged use and temperature changes. TECNO-3 SYSTEM - SIDI’s TECHNO-3 SYSTEM dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit. SIDI’s famously reliable and replaceable closures are improved by an all new proprietary SIDI Wire material that is completely non-binding for intuitive and effortless on-the-fly adjustments. Like most SIDI small parts, the TECNO-3 SYSTEM is serviceable and replaceable. SIDI HEEL CUP - Reinforced cup that stabilizes and supports the heel. Anatomically shaped plastic, reduces heel slip and provides increased power transfer. Provides additional foot protection in the event of a crash. REPLACEABLE HEEL PAD - For walkability, Sidi cycling shoes include a replaceable polyurethane heel pad. Millennium 5 Sole heel pad has a new design and it is very light.
Sidi Dominator 5 Fit
$249.99
MTB COMPETITION SOLE - Has been specifically studied for this specialty, may be fitted with two toe spikes on the front for traction in difficult and muddy conditions. The toe spikes are sold separately. CALIPER BUCKLE - SIDI’s TECHNO-3 PUSH dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit. SIDI’s famously reliable and replaceable closures are improved by a proprietary SIDI Wire material that is completely non-binding for intuitive and effortless on-the-fly adjustments. Like most SIDI small parts, the TECHNO-3 PUSH buckle is serviceable and replaceable. It can be adjusted while riding, thanks to an innovative button which can be pushed to lift the buckle and facilitate the adjustment. SOFT INSTEP CLOSURE SYSTEM - The SOFT INSTEP CLOSURE SYSTEM is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area. The SOFT INSTEP CLOSURE SYSTEM is adjustable from both sides, to perfectly center the EVA pad over a high or low instep. The system eliminates the need for the High Instep Extender. The SOFT INSTEP CLOSURE SYSTEM is replaceable HIGH SECURITY VELCRO - HIGH SECURITY VELCRO straps with integrated locking polymer teeth, that engage onto each other when the strap is closed. This feature makes the closure more secure and the strap becomes unmoveable. Tallone Sidi - The reinforced heel keeps the foot in a optimal position and avoids the shoe being deformed by extreme performance or prolonged pressure. Microfibra Microtech - Incorporates features of resistance, stability, lightness, transpirability, water-repellency and eco-friendliness. It is manufactured using the “Water-Tech” water treatment. Lower environmental impact, less noxious emissions into the air and into the work environment and the fact that not solvents, but water-based products were used, is beneficial to the environment as well as the final user.
Sidi Genius 5 Fit Carbon
$249.99
MILLENIUM 4 CARBON SOLE - The MILLENNIUM 4 CARBON COMPOSITE Sole features injected carbon fiber in a matrix of nylon, providing more rigidity than a standard nylon sole. The MILLENNIUM 4 CARBON COMPOSITE Sole is also more durable, completely non-water absorbent and mechanically stable, meaning it’s less susceptible to changes in stiffness resulting from aging, prolonged usage, and changes in temperature or humidity. An anti-slip toe insert and replaceable polyurethane heel pad are incorporated into the MILLENNIUM 4 CARBON COMPOSITE Sole for walkability. The MILLENNIUM 4 CARBON COMPOSITE Sole uses a standard 3-hole drilling pattern for compatibility with the best pedal systems available, and includes a printed 10 mm lateral and fore/aft cleat alignment scale on the sole as well as the Look Memory Eyelet for easy cleat alignment and replacement. CALIPER BUCKLE - The micrometric closure called “CALIPER BUCKLE” is adjustable by lifting the central buckle. In order to completely open, lift together both side buckles, or push the center button to slightly loosen one tooth at the time. The system is also adjustable during a race. SOFT INSTEP CLOSURE SYSTEM - The SOFT INSTEP CLOSURE SYSTEM is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area. The SOFT INSTEP CLOSURE SYSTEM is adjustable from both sides, to perfectly center the EVA pad over a high or low instep. The system eliminates the need for the High Instep Extender. The SOFT INSTEP CLOSURE SYSTEM is replaceable. HIGH SECURITY VELCRO - HIGH SECURITY VELCRO straps with integrated locking polymer teeth, that engage onto each other when the strap is closed. This feature makes the closure more secure and the strap becomes unmoveable. Microfibra Microtech - Incorporates features of resistance, stability, lightness, transpirability, water-repellency and eco-friendliness. It is manufactured using the “Water-Tech” water treatment. Lower environmental impact, less noxious emissions into the air and into the work environment and the fact that not solvents, but water-based products were used, is beneficial to the environment as well as the final user. Tallone Sidi - The reinforced heel keeps the foot in a optimal position and avoids the shoe being deformed by extreme performance or prolonged pressure.
Sidi Genius 7 Black
$249.99
MILLENIUM 5 SOLE - The redesigned MILLENNIUM 5 SOLE is constructed from injected carbon fiber in a nylon matrix. This infusion of carbon fiber in the nylon increases sole stiffness and durability, ensuring optimum performance in the face of prolonged use and temperature changes. CALIPER BUCKLE - SIDI’s TECHNO-3 PUSH dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit. SIDI’s famously reliable and replaceable closures are improved by an all new proprietary SIDI Wire material that is completely non-binding for intuitive and effortless on the fly adjustments. Like most SIDI small parts, the TECHNO-3 PUSH buckle is serviceable and replaceable. It can be adjusted while riding, thanks to an innovative button which can be pushed to lift the buckle and facilitate the adjustment. SOFT INSTEP CLOSURE SYSTEM - The SOFT INSTEP CLOSURE SYSTEM is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area. The SOFT INSTEP CLOSURE SYSTEM is adjustable from both sides, to perfectly center the EVA pad over a high or low instep. The system eliminates the need for the High Instep Extender. The SOFT INSTEP CLOSURE SYSTEM is replaceable. HIGH SECURITY VELCRO - HIGH SECURITY VELCRO straps with integrated locking polymer teeth, that engage onto each other when the strap is closed. This feature makes the closure more secure and the strap becomes unmovable. SIDI HEEL CUP - Reinforced cup that stabilizes and supports the heel. Anatomically shaped plastic, reduces heel slip and provides increased power transfer. Provides additional foot protection in the event of a crash. REPLACEABLE HEEL PAD - For walkability, Sidi cycling shoes include a replaceable polyurethane heel pad. Millennium 5 Sole heel pad has a new design and it is very light.
Sidi Genius 7 Black/Red
$249.99
MILLENIUM 5 SOLE - The redesigned MILLENNIUM 5 SOLE is constructed from injected carbon fiber in a nylon matrix. This infusion of carbon fiber in the nylon increases sole stiffness and durability, ensuring optimum performance in the face of prolonged use and temperature changes. CALIPER BUCKLE - SIDI’s TECHNO-3 PUSH dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit. SIDI’s famously reliable and replaceable closures are improved by an all new proprietary SIDI Wire material that is completely non-binding for intuitive and effortless on the fly adjustments. Like most SIDI small parts, the TECHNO-3 PUSH buckle is serviceable and replaceable. It can be adjusted while riding, thanks to an innovative button which can be pushed to lift the buckle and facilitate the adjustment. SOFT INSTEP CLOSURE SYSTEM - The SOFT INSTEP CLOSURE SYSTEM is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area. The SOFT INSTEP CLOSURE SYSTEM is adjustable from both sides, to perfectly center the EVA pad over a high or low instep. The system eliminates the need for the High Instep Extender. The SOFT INSTEP CLOSURE SYSTEM is replaceable. HIGH SECURITY VELCRO - HIGH SECURITY VELCRO straps with integrated locking polymer teeth, that engage onto each other when the strap is closed. This feature makes the closure more secure and the strap becomes unmovable. SIDI HEEL CUP - Reinforced cup that stabilizes and supports the heel. Anatomically shaped plastic, reduces heel slip and provides increased power transfer. Provides additional foot protection in the event of a crash. REPLACEABLE HEEL PAD - For walkability, Sidi cycling shoes include a replaceable polyurethane heel pad. Millennium 5 Sole heel pad has a new design and it is very light.
Page 1 of 2 Next page