Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Stan's NoTubes

(171 matches)
Stan's NoTubes Standard Tubeless Kit
$63.95
Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's Standard Tubeless Kit converts standard tubed wheels to tubeless so you can reap the benefits. Everything you need to go tubeless is included. Plus, you won't miss dealing with flat tires and you'll save money on tubes!
Stan's NoTubes Tire Sealant (Quart)
$24.95
If you've heard the expression "to Stan's a tire," it's referring to Stan's Tire Sealant. Put the recommended amount in your road, mountain and cyclocross tires and it will stop slow leaks and seal small punctures. Rim strips and valves not included.
Stan's NoTubes Core Remover
$8.50
Remove both Presta and Schrader valve cores with Stan's Core Remover. It's necessary to remove the valve core to inject sealant into the tire.
Stan's NoTubes The Raven (29-Inch)
$71.95
Stan's The Raven tire supplies you with speed and traction. Its low-profile center section and dual-durometer rubber composition make this a fast-rolling tire. Large, soft side knobs plus a casing designed to be run at low pressures let The Raven really dig its claws into the trail. And of course, it's tubeless ready.
Stan's NoTubes 3.30HD 20mm Hub Kit
$20.00
Stan's 3.30HD 20mm Hub Kit makes Stan's 3.30HD front hubs 20mm through-axle compatible. Installation is easy—just pull the old ones off and put the new ones on.
Stan's NoTubes Avion Team Rear Wheel
$899.00
Offering decreased rolling resistance on paved roads, unbeatable comfort on gravel, and a weight barely over 1610g, the Avion Carbon Disc is the future of performance road wheelsets. The Avion's R Series Bead Socket Technology is designed for tubeless-specific road tires, traditional clincher tires when used with tubes, and wider gravel and cyclocross tires. The 28mm WideRight rim profile of the Avion increases tire volume and decreases pressure for less rolling resistance, superior traction, and more comfort. Featuring our vibration damping Radial Impact Absorbing Carbon Technology (RiACT) and built around the reliability and quick engagement of our new Neo, the Avion offers performance that doesn't stop when the pavement ends. Avion wheels come with yellow tape and 55mm tubeless valves installed. Front wheels ship with 15x100mm TA end caps installed, but also include 12x100mm TA and QR end caps and skewers. Rear wheels ship with 12x142mm TA end caps installed, but also include QR end caps and skewers. Also inside the box you'll find replacement spokes, small parts bag, and a final QC readout for your unique wheelset. - Designed for Disc Brake Road, Gravel, and Cyclocross - 41mm deep aerodynamic RiACT rims absorb impacts and roll faster - New faster engaging, 100% CNC machined Neo hubs - BST-R series for tubeless road, traditional road with tube, and wider tires - 28mm WideRight rim design optimized for 25mm-40mm tires - Sapim spokes with Secure Lock aluminum nipples - 2-year warranty with 3-year crash replacement
Stan's NoTubes Avion Disc Pro Rear Wheel
$1,194.00
Offering decreased rolling resistance on paved roads, unbeatable comfort on gravel, and a weight barely over 1500g, the Avion Carbon Disc is the future of performance road wheelsets. The Avion's R Series Bead Socket Technology is designed for tubeless-specific road tires, traditional clincher tires when used with tubes, and wider gravel and cyclocross tires. The 28mm WideRight rim profile of the Avion increases tire volume and decreases pressure for less rolling resistance, superior traction, and more comfort. Featuring our vibration damping Radial Impact Absorbing Carbon Technology (RiACT) and built around the reliability and quick engagement of our new Neo and Neo Ultimate hubs, the Avion offers performance that doesn't stop when the pavement ends. Avion wheels come with yellow tape and 55mm tubeless valves installed. Rear wheels ship with 12x142mm TA end caps installed, and include QR end caps and skewers. Inside the included small parts bag you'll find replacement spokes and a final QC readout for your unique wheelset. - Designed for Disc Brake Road, Gravel, and Cyclocross - New faster engaging, 100% CNC machined Neo Ultimate hubs - Sapim CX-Ray spokes with Secure Lock aluminum nipples - 41mm deep aerodynamic RiACT rims absorb impacts and roll faster - BST-R series for tubeless road, traditional road with tube, and wider tires - 28mm WideRight rim design optimized for 25mm-40mm tires - 2-year warranty with 3-year crash replacement
Stan's NoTubes 3.30 Shimano/SRAM Freehub Body (9/10-speed)
$74.00
Replacement Shimano/SRAM freehub body for Stan's NoTubes 3.30 rear hubs.
Stan's NoTubes 3.30/3.30Ti Shimano/SRAM Steel Freehub Body (9/10-speed)
$74.00
Replacement Shimano/SRAM steel freehub body for Stan's NoTubes 3.30 disc or HD disc rear hubs.
Stan's NoTubes 2oz Tire Sealant Injector
$9.95
Stan's 2oz Tire Sealant Injector measures the desired amount of sealant then attaches to your valve stem for easy, no-mess application. And, it works on Presta and Schrader valves!
Stan's NoTubes Tubeless Valve Stems
$16.00
Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant. Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads: - MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi - ERD 615, 622x49.9, 29 in x 52.3mm Your rim has a stepped valve and is not compatible with this Schrader valve.
Stan's NoTubes Flow Tubeless Kit
$68.95
Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's Freeride Tubeless Kit converts standard tubed wheels to tubeless so you can reap the benefits. Everything you need to go tubeless is included. Plus, you won't miss dealing with flat tires and you'll save money on tubes!
Stan's NoTubes Universal Kit Rim Tape
$6.00
Lay down Stan's Universal Kit Rim Tape before the tubeless conversion of your non-Stan's rims. It makes your rims air tight and ready for tubeless use by covering the spoke holes.
Stan's NoTubes Enduro Rim Strip
$22.50
Stan's Enduro Rim Strip converts standard tubed wheels to tubeless so you can reap the benefits. Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's rim strips create a tight seal with the tire bead, reducing the instances of "burping". Plus, you won't miss dealing with flat tires and you'll save money on tubes!
Stan's NoTubes Downhill Rim Strip
$22.50
Stan's Downhill Rim Strip converts standard tubed wheels to tubeless so you can reap the benefits. Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's rim strips create a tight seal with the tire bead, reducing the instances of "burping". Plus, you won't miss dealing with flat tires and you'll save money on tubes!
Stan's NoTubes All Mountain 29er Tubeless Kit
$68.95
Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's All Mountain 29er Tubeless Kit converts standard tubed wheels to tubeless so you can reap the benefits. Everything you need to go tubeless is included. Plus, you won't miss dealing with flat tires and you'll save money on tubes!
Stan's NoTubes Downhill Tubeless Kit
$68.95
Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's Downhill Tubeless Kit converts standard tubed wheels to tubeless so you can reap the benefits. Everything you need to go tubeless is included. Plus, you won't miss dealing with flat tires and you'll save money on tubes!
Stan's NoTubes 3.30HD 12 x 142mm Hub Kit
$20.00
Stan's 3.30HD 12 x 142mm Hub Kit converts Stan's 3.30HD rear hubs from 12 x 135mm to 12 x 142mm.
Stan's NoTubes ZTR Alpha Rim 340 (700c)
$120.00
Stan's ZTR Alpha 340 Rim lets you enjoy the advantages of a tubeless setup on your road and cyclocross bikes. At only 350 grams, it's light, strong, and it features a semi-aero profile for quick accelerations and blazing speed. The Alpha rim also uses Stan's BST technology for easy tubeless conversions, while its wide inner profile and lowered sidewalls boost tire volume for enhanced traction.
Stan's NoTubes 3.30HD 9mm Thru Axle Hub Kit
$21.00
The 3.30HD 9mm Thru Hub Kit makes Stan's 3.30HD front hubs 9mm through axle compatible. Installation is easy—just pull the old ones off and put the new ones on.
Stan's NoTubes XD Freehub Conversion Kit (Stan's 3.30 Hubs)
$80.00
This conversion kit allows you to use SRAM's 11-speed mountain cassette on your Stan's NoTubes wheels. Each kit includes an XD freehub, spacer, drive side end cap, and three sealed bearings.
Stan's NoTubes ZTR Flow EX Wheel (Front)
$259.99
Stan's ZTR Flow EX Wheel is perfect for the trail rider who likes to push it on the downhills and pedal back up to the top for more. The Flow rim utilizes a unique arch shape for increased strength and stiffness, while Stan's BST technology allows for easy tubeless conversions. Plus, the rim's wide inner profile and lowered sidewalls boost tire volume for enhanced traction on tricky terrain. And, the Flow is built around Stan's 3.30HD hub with DT Swiss spokes for a responsive ride and trail-after-trail reliability.
Stan's NoTubes ZTR Alpha 400 Rim (700c)
$120.00
Stan's ZTR Alpha 400 Rim lets you enjoy the advantages of a tubeless setup on your road and cyclocross bikes. At only 350 grams, it's light, strong, and it features a semi-aero profile for quick accelerations and blazing speed. The Alpha rim also uses Stan's BST technology for easy tubeless conversions, while its wide inner profile and lowered sidewalls boost tire volume for enhanced traction. And this version can be used with rim brakes as well as disc brakes.
Stan's NoTubes XD Freehub Conversion Kit (Stan's 3.30HD Hubs)
$80.00
This conversion kit allows you to use SRAM's 11-speed mountain cassettes on your Stan's NoTubes 3.30HD wheels. Each kit includes an XD freehub, spacer, drive side end cap, and three sealed bearings.
Stan's NoTubes Bravo Team 29 Rear Wheels
$701.25 - $825.00 $825.00 Up To 15% Savings
Built for all-day trail rides and enduro racing, and developed with the World Championship-winning Atherton DH Team, our new Bravo wheelset rethinks carbon fiber from the ground up. The Bravo's Radial Impact Absorbing Carbon Technology (RiACT) is three times stiffer than our aluminum rims laterally, but absorbs radial impacts to withstand bigger hits and roll faster. Patented Bead Socket tubeless technology improves traction, and creates a lighter, stronger rim. The Bravo's 32mm WideRight profile increases tire volume without negatively affecting tread shape or sidewall height. With the added durability and quick engagement of our new Neo and Neo Ultimate hubs, the Bravo is the new benchmark for all trail wheelsets. Bravo wheels include: pre-installed tape for tubeless use and presta valve; 12x142mm rear wheels also include quick-release end caps and quick release; small parts bag, replacement spokes, and spoke tension readout for your unique wheelset. - Designed for Trail, All-Mountain and Enduro Racing - Faster engaging, 100% CNC machined Neo Ultimate hubs - Sapim Custom Force 2.0/1.7/1.8 spokes with Secure Lock aluminum nipples - RiACT system absorbs impacts and rolls faster - Bead Socket Technology for unmatched tubeless performance - WideRight rim design optimized for wider Trail and All-Mountain tires - 2-year warranty with 3-year crash replacement
Stan's NoTubes Hugo 52 27.5 Wheelsets
$729.00
Hugo’s ultra-low profile sidewalls combine with a special central raised box section to create a structurally superior fat rim that’s exceptionally light, fast-rolling, and nearly impervious to flats, even when using tubes. The shape of the rim creates a superior seal — making tire inflation easy without a tube — and spreads the tire's contact patch for better strength and support with excellent pinch flat protection. Hugo wheels include: pre-installed tape for tubeless use and schrader valve system; 15x100mm front wheels include quick-release end caps and quick release; 12x142mm rear wheels also include quick-release end caps and quick release. - For fat bike riding, racing and adventuring - Genuine NoTubes' tubeless technology with innovative raised center rim profile for tubeless use - Rim width: 53.1mm external and 49.9mm internal for maximum tire volume and flotation - Compatible with plus and fat clincher tires when used with 27mm Yellow Tape, 35mm Valve Stem, and NoTubes Sealant
Stan's NoTubes ZTR Crest Rim (26-inch)
$85.00
Thicker walls plus extremely low weight make Stan's ZTR Crest rim a stiff, light XC race rim. The Crest uses Stan's BST technology for easy tubeless conversions, while its wide inner profile and lowered sidewalls boost tire volume for enhanced traction.
Stan's NoTubes 3.30/3.30Ti Rear Hub End Caps for XD Driver
$17.50 - $20.00
Replacement end caps for Stan's NoTubes rear hubs with XD Driver.
Stan's NoTubes Valor Pro 29 Rear Wheels
$1,000.00
Lighter and stronger than aluminum rims, the Valor’s carbon lay-up is engineered to absorb radial vibrations and impacts through a construction that is both elastic and strong. Stan's NoTubes has constructed a lightweight carbon fiber rim design not just to be stronger than aluminum, but also to perform better in real world riding conditions. Valor wheels include: pre-installed tape for tubeless use and presta valve; 12x142mm rear wheels also include quick-release end caps and quick release; small parts bag, replacement spokes, and spoke tension readout for your unique wheelset. - Designed for cross country racing and riding - Faster engaging, 100% CNC machined Neo Ultimate hubs - Sapim Custom Laser 1.8/1.5/1.8 spokes with Secure Lock aluminum nipples - RiACT system absorbs impacts and rolls faster - Bead Socket Technology for unmatched tubeless performance - WideRight rim design optimized for wider tires / 2.00 - 2.25 - 2-year warranty with 3-year crash replacement
Stan's NoTubes ZTR Crest Wheel (Front)
$259.99
Stan's delivers an aluminum wheel that rivals the weight of carbon: the ZTR Crest. The Crest rim is strong while keeping the weight low, resulting in a stiff race rim for riders that like to go hard. Plus, this sweet hoop is built with Stan's 3.30 hubs and DT Swiss spokes for snappy responsiveness and reliability. The Crest also uses Stan's BST technology for easy tubeless conversions, while its wide inner rim profile and lowered sidewalls boost tire volume for enhanced traction.
Page 1 of 6 Next page