Filter By:
Parts & Accessories

$45.00
3-IN-1 Handlebar Mounted Accessory Holder:
3-IN-1 Design:
- Headlights
- Action Cameras (GoPro)
- Garmin Computers (Compatible w/ Garmin Only)
- Adjustable Angle (100 Degree Tilt Up/Down)
- Materials: Aluminum Alloy, Nylon
- Simple Installation
Specs:
- Length: 105mm
- Width: 68mm
- Height: 57mm
- Weight: 76g
- Snap Ring Fitment: 31.8-32mm Bars
- Max Load: 400g

$14.00
Planet Bike's BRT Strap is a small item that provides big visibility. This versatile LED safety band can be used as an arm band, pants keeper, dog collar and anything else you can think of. An included lithium battery provides over 200 hours of run time in either flashing or steady mode.
$6.00
- Mounts Beamer and Blaze 1/2W lights to a helmet
- Compatible with Beamer 1, Beamer 3, Beamer 5, Blaze 1/2W and Blaze 2W Micro, Blaze 140 SL, Blaze 180 USB
- Increased weight and length of Blaze 300, 500, and 650 USB lights may cause awkward mounting on helmet

$5.00
- Attaches to rear racks
- Compatible with: Blinky 3,5,7 and Superflash
- 25mm between each of the top horizontal holes (center to center)
- Requires an "L bracket" that typically comes with a rear rack. If your rack is missing the L bracket, you can purchase Planet Bike's rack hardware pack

$5.00
- Fits seatpost (up to 31.8mm) or seatstay
- Compatible with: Blinky 3,5,7, all Superflash lights and Blinky Safety rear light
- Use with Blinky Safety Front light bracket to fit oversize (~31.8mm) handlebars

$16.00
The NiteRider Adjustable Angle Tail Light Strap Mount was specifically designed for our flagship tail light, the Sentinel. It allows you to fine-tune the mounting angle of the light to display the projected Laser Lanes even and parallel on the ground. It's an easy on and off non-slip tail light mount that also features a grooved contact pad that makes this the 'go to' mount for riders using aero seat posts.
System Compatibility
- Sentinel
- Solas
- Sabre
- CherryBomb

$9.99
The NiteRider Lumina Handlebar Strap Mount offers a wide variety of handlebar size fitments and remains rock solid while riding through rough terrain. It’s easy to install and, like all NiteRider mounts, features a quick release tab for when it’s time to recharge or leave your bike unattended.
System Compatibility:
- Lumina Series
- Mako Series
- MiNewt Cordless Series

$14.99
Increase your line of sight with the NiteRider Lumina Helmet Mount. By mounting your head light onto your helmet, it’ll allow you to see farther into your turn or wherever your head turns.
System Compatibility:
- Lumina Series
- MiNewt Mini Series
- Mako Series
$14.99
The NiteRider Lumina Stick-On Mount is ideal for non-vented helmet mounting applications. Whether it be your favorite downhill/MX style helmet or explore the versatility of your Lumina head light by mounting it onto an industrial hard hat making it the ultimate work light!
System Compatibility
- Lumina Series
- MiNewt Mini Series
- Mako Series

$9.99
If you're looking to mount your Lumina and Mako series lights to a GO Action Camera style mounting point, this is the accessory you've been looking for. The mounting point screws into the GO Action Camera style connection for a solid and secure fitment.
System Compatibility
- Lumina Series
- Mako Series

$38.00
Handlebar mount for all systems that use the slider mounting clip. Fits handlebar clamp diameters from 25.4mm–35mm.
System Compatibility:
- Pro Series
- HID Series
- Classic Plus & Select
- Evolution & Digital Evolution
- HeadTrip & Digital HeadTrip
- TrailRat & TrailRat Select
- RoadRat
- Digital Patrol LED
- Digital Patrol
- Pre 2001 systems

$2.99
Lezyne's Go-Pro LED Adapter allows you to mount your Lezyne LED light to any standard Go-Pro mount. This makes it fast and easy to switch swap out your camera and headlight using the same mount.

$19.95
Lights, Camera, You Name it
The Accessory Mount is a great solution for attaching your GoPro-style mount to your helmet, seatpost, handlebar, selfie-stick or just about anything else. The banded system offers easy attachment, the 270 degree rotation helps you position your camera so that you can get the shot every time, and the omni-directional breakaway feature will take the hit in a crash (possibly saving your camera equipment). With the Accessory Mount, your imagination is the only thing holding you back.
Features
- Omni-directional breakaway, 270 Degree Rotation

$5.95
- Mounts most AA flashlights to handlebars and helmets
- Ideal low-cost lighting alternative for cyclists

$24.95
Gain more room or find the perfect position for lights, computers, music players, GPS, or whatever, with the Topeak BarXtender. Attaches securely to the handlebars or stem and adjusts for optimum position.
- Clamp: Fits 22-38 mm tubes (shims included)
- Crossbar: Device mount bar 25.4 mm
- Material: Engineering Grade Plastic and Steel
- Mount: Handlebar, Handlebar Stem
- Size (L x W x H): 18 x 3 x 3 cm, 7.1” x 1.2” x 1.2” (folded)
- Size (L x W x H): 13 x 10 x 3 cm, 5.1” x 3.9” x 1.2” (open)
- Weight: 116 g / 4.08 oz

$24.95
Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.

$44.95
Up-To-Front Multi-Mount aligns everything to be mounted front and center for viewing convenience and to easily capture those precious ride moments, track your ride, and illuminate your way home from your adventure. Includes adapters for mounting GoPro/Shimano Sport Cameras, Garmin Edge/Wahoo/Sigma GPS cycle computers, Topeak CubiCubi front lights, WhiteLite HP 500, WhiteLite 800BT, and other GoPro-mount-compatible devices. Flipflop mounts can be positioned to customize device viewing height so you can be focused and enjoy your ride!
- Material: Forged aluminum / Engineering grade polymer
- Modular Multi-Mount: Adapters included for GoPro / Shimano Sport Cameras, Garmin Edge / Wahoo / Sigma
- Device: GPS cycle computers, Topeak CubiCubi front lights, WhiteLite 800 BT, and WhiteLite HP 500
- Bracket: Fits 25.4 – 31.8mm handlebars (shims included)
- Max Load: 480g / 16.93oz
- Added Features: Angle adjustment (Sport Camera), Rotates for landscape or portrait viewing (RideCase)
- Weight: 52g / 1.83oz
- Size: 12.5 x 6.6 x 4.3cm / 4.9" x 2.6" x 1.7"

$39.95
An innovative cycle computer/action camera center mount, specifically designed for integrated stem/handlebar systems. Various mounting positions for Garmin Edge/Wahoo/Sigma GPS cycle computers and GoPro/Shimano sport cameras, Topeak CubiCubi front lights, WhiteLite HP 500, WhiteLite 800 BT, and other GoPro-mount-compatible devices.
- Compatible Devices: Garmin Edge / Wahoo / Sigma GPS bike computer / GoPro action cams and other devices with GoPro mount
- Handlebar Compatibility: Shimano Pro Stealth, FSA Plasma, Ritchey WCS Solostream, SCOTT SYNCROS RR1.0 Carbon Aero 420, Most Talon, Canyon H31 & CP series
- Material: aluminum / fiberglass composite
- Max load: 220g
- Weight: 40g (120mm) / 45g (150mm)
- Dimensions: 12 x 3.5 x 3cm (120mm) / 15 x 3.5 x 3cm (150mm)

$21.95
Free up bar space and secure your Supernova lights or most other stem-mounted accessories with our Ritchey Universal Stem Mount. Our unique mount means clutter- and hassle-free mounting of your favorite devices where they're easily viewed and operated.
- Compatible with Ritchey C220 and 4-Axis 44 stem faceplates
- Forged and machined alloy
- Includes extended-length hardware

$19.99
Problem Solvers' Braze-on Light mount threads into your fork or fender eyelets, allowing you to mount lights or accessories. It's lower position is great for getting your light closer to the ground for better visibility.

$7.99
-Mounts easily to front racks with threaded M5 mounts
-Allows for unobstructed light positioning
-22.2mm clamping diameter
$6.99
- Compatible with Blinky 3,5,7, Superflashes, Turbo, Turbo Minis Superflash Micros and Blinky Safety rear light
- Designed specifically for aero seat posts
- Adjustable light angle
- Easy on/easy off design makes for quick mounting and removal

$9.99
The bolt-on headlight bracket mounts to your fork crown and provides a unique mounting option that centers a headlight just above the front wheel. It comes with a platform that is specifically designed to work with most Planet Bike lights. This platform can be removed quickly to create a 26.2mm diameter universal mount that accommodates most clamp and stretch strap mounting systems.
- Planet Bike specific platform works with most Planet Bike headlights
- Converts to a 26.2mm universal mount to fit most headlight mounting systems
- Bracket bolts through brake mount on fork crown (60mm bolt, washer, and nut included)
- Compatible with all Blaze, Beamer, Spok, Amigo and Spot headlights
- Weight: 72 grams

$5.99
- Quick Strap mounts, adjusts or removes in seconds without tools
- Fits 25.4-35mm handlebars
- Compatible with Blazes, Beamers, 1200 and Super Spot

$5.99
- Compatible with all Blaze headlights, Beamer 1/3/5, 1200, Dual Spot, and Bright Spot bike headlights
- Fits 25.4 – 31.8mm handlebars

$6.99
- Compatible with seatpost diameter 20mm-36mm
- Adjustable light angle
- Easy on/easy off design makes for quick mounting and removal
- Compatible with Blinky 3,5,7, Superflashes, Turbo, Turbo Minis, Superflash Micros and Blinky Safety rear light
Page 1 of 4
Next page