Seatposts

Syntace's HiFlex full carbon seatpost is centered around a highly technical carbon design that evenly distributes rider load as well as damps vibrations without loss of control. Its extra-deep 52mm bottom clamp offers optimal rail support while a shallow 30mm top clamp allows for extra fore-aft adjustment. The two-bolt micro adjust clamp offers precise saddle angle adjustments and features bolts arranged in line with the direction of bump forces for increased strength Ideal for anything from road to mountain. - Improved vibration damping and directional stability - Bob-damping mechanism for full suspension bikes - Compatible with most Carbon rails - Weight: 212g - Max. Height: 310mm - Min. Height: 40mm

The Duncan 1.5 seatpost utilizes a high-end 7075 aluminum to create the best balance between stiffness and lightweight. The 2-bolt clamp is designed to ensure an easy setup and your saddle stays put. This model has a 10mm offset. - Designed and tested to meet Syncros' stringent standards for fatigue and impact strength. - 3D forged heat-treated aluminum tube - Proven Syncros clamp design for ease of adjustment - Compatible from 7x7mm up to 7x10mm rails, incl. carbon rails - Length: 400mm - Weight: 265g

The Duncan 1.5 seatpost utilizes a high-end 7075 aluminum to create the best balance between stiffness and lightweight. The 2-bolt clamp is designed to ensure an easy setup and your saddle stays put. This model has a 25mm offset. - Designed and tested to meet Syncros' stringent standards for fatigue and impact strength. - 3D forged heat-treated aluminum tube - Proven Syncros clamp design for ease of adjustment. Compatible from 7x7mm up to 7x10mm rails incl. carbon rails. - Compatible from 7x7mm up to 7x10mm rails, carbon rails inclusive - Length: 400mm

The Duncan 2.0 seatpost utilizes a wallet-friendly 6061 aluminum. The 2-bolt clamp is designed to ensure an easy setup and your saddle stays put. This model has a 10mm offset. - Designed and tested to meet Syncros' stringent standards for fatigue and impact strength. - 3D forged heat-treated aluminum tube - Proven Syncros clamp design for ease of adjustment. Compatible from 7x7mm up to 7x10mm rails, incl. carbon rails. - Compatible from 7x7mm up to 7x10mm rails, carbon rails inclusive - Length: 400mm - Weight: 280g

The Syncros Dropper 2.0 seatpost gives you the freedom to quickly switch from sprinting uphill or attacking down a descent with the simple press of the remote. Internal cable routing, infinite steps and 120mm or 150mm of travel round out this lightweight package. - Alloy AL7050 - 31.6mm diameter - 10mm Offset - Compatible from 7x7mm up to 7x10mm rails, carbon rails inclusive

Our Duncan Aero seatpost is optimized for the new Scott Addict road bike with a dedicated profile. Constructed from super light carbon fiber the layup is optimized for an excellent balance between light weight, stiffness and comfort. The 2-bolt clamp is designed to ensure that your setup is easy and your saddle stays put. - Our lightest-ever seatpost - Syncros engineered carbon construction offers an optimized blend of strength and light weight - Proven Syncros clamp design for ease of adjustment - Compatible from 7x7mm up to 7x10mm rails, carbon rails inclusive (adapter included) - Compatible with Addict RC, Addict Gravel, Addict eRide - Weight: 160g - Length: 400mm - Carbon UD, Superlight Layup

Our Duncan SL seatpost is produced from high-end and super-light carbon fiber which combined with an optimized layup makes for an excellent balance between light weight, stiffness and comfort. The 2-bolt clamp is designed to ensure that your setup is easy and your saddle stays put. - Syncros engineered carbon construction offers an optimized blend of strength and lightweight - Proven Syncros clamp design for ease of adjustment - Compatible from 7x7mm up to 7x10mm rails, carbon rails inclusive - Weight: 185g (27.2x400mm) - Length: 400mm - Carbon UD, Superlight Layup

The Syncros FL1.0 Carbon Offset Seatposts utilize an optimized carbon layup to best balance stiffness and comfort into a lightweight structure. The multi-rail-compatible 2-bolt clamp and anti-slip design ensure that your setup is easy and your saddle stays right where you put it. - Material: Carbon Ud - Rails compatibility: 7x7mm to 7x10mm, carbon rails inclusive - Rails: Round/oval saddle rails - Weight: 210 grams (31.6mm)

The Syncros FL1.5 seatpost utilizes a high-end 7075 aluminum to best balance stiffness and lightweight. The multi-rail-compatible 2-bolt clamp and anti-slip design ensure that your setup is easy and your saddle stays right where you put it. - Material: Alloy AL7050 - Rail compatibility: 7.7mm-7x10mm, carbon rails inclusive - Rails: round/oval saddle rails - Weight: 265 grams (31.6mm)

Syncros FL1.5 seatposts utilize a high-end 7075 aluminum to create the best balance between stiffness and low weight. The 2-bolt clamp is designed to ensure an easy setup and your saddle stays put. - Designed and tested to meet Syncros' stringent standards for fatigue and impact strength. - 3D forged heat-treated aluminum tube - Proven Syncros clamp design for ease of adjustment. Compatible from 7x7mm up to 7x10mm rails, carbon rails inclusive.

The Duncan TRI seatpost is constructed from carbon fiber for ultimate weight saving. The saddle is mounted to a sliding rail, which allows for a wide range of adjustment. - Sliding mount for rail - Carbon fiber - Compatible with Plasma 6 only

• Aluminum • Coil spring provides plush suspension • Adjustable pre-load design • Micro-adjust seat clamp • 450 grams

- Forged aluminum - 7/8-inch seat-clamp diameter - 165 grams

- Chrome - Sold individually

• Aluminum • Coil spring suspension • Adjustable pre-load design • Collar adjustment for play removal • 7/8-inch seat-clamp diameter

• Steel • Polished-chrome finish • 7/8-inch seat-clamp diameter

• Unicycle-specific seatpost

Sunday Bikes pivotal seatpost.

Stolen Thermalite Pivotal Seatpost. Thermalite is proprietary material made with Nylon 66 base w/ 50% longer glass fiber infusion. Thermalite posts are 30% lighter than the current Alloy posts on the market. - Dupont Nylon 66 with 50% longer glass fiber infusion - 1/3 lighter than any alloy post on the market - Compatible with all Pivotal seats - Weight: 2.8oz.

The Salsa Guide Carbon Seatpost is lightweight, durable, and supportive when you need it most. - Carbon shaft - Bonded Aluminum two-bolt head

The Salsa Guide Deluxe Seatpost is premium aluminum: lightweight, strong, and drama-free. Count on it to be there when you need it. - 2014 Aluminum shaft - Two-bolt head

Salsa's Regulator Ti Seatpost delivers the maximum comfort and performance of titanium, along with the convenience of independent adjustment of saddle angle and fore/aft positioning. This post is built for the long haul with specifically designed, stainless steel bolts, as well as CNC'd aluminum head internals and saddle clamps to provide the ultimate in strength and durability. - 3/2.5 titanium with a brushed finish - Length: 410mm - Proprietary head design allows independent saddle angle and fore/aft positioning - Small, lightweight head design uses CNC-machined AL-6061 internals with stainless steel threaded stud to prevent thread stripping - CNC-machined AL-7075 saddle clamps - Specially designed, stainless steel bolts provide ultimate strength and durability *NOTE: Not for use with carbon seat rails or ovalized seat rails

The new Reverb AXS XPLR dropper post delivers more control, confidence, and fun on gravel roads everywhere. Getting the saddle out of the way means more room to move, saving you from awkward maneuvering and sketchy descents. We created an all-new design complete with lightweight air-only internals featuring built-in compliance we call ActiveRide. It's like travel for your saddle. Enabled by SRAM AXS technology, Reverb AXS XPLR is part of the ultimate personalized cockpit. - New 27.2mm Reverb AXS XPLR delivers more control, confidence, and fun for gravel - ActiveRide—Air only internals provide a fully rigid top-out position. With the touch of your AXS controller, you've got built-in compliance to ensure comfort and control over the roughest sections of gravel - Two travel options to choose—50mm or 75mm - Saddle clamp options compatible with 7x10 oval carbon rails. - Seat post length includes 400mm and 350mm (50mm drop only) - AXS Technology allows rider customization via the AXS Mobile App - AXS handlebar controls (drop or flat bar) - Shared battery with all other SRAM AXS enabled components - System is completely waterproof and dustproof to IP69K—take it anywhere - SRAM AXS battery and charger included SPECIFICATIONS: - TRAVEL: 50mm, 75mm - POST DIAMETER: 27.2mm - POST LENGTH: 350mm, 400mm - REMOTE: AXS Controller Sold Separately - SADDLE RAIL COMPATIBILITY: Round/Oval (7x9 & 7x10), Round/Oval (7x9) - WEIGHT (G): 562 - WEIGHT BASED ON: 75mm Travel 400mm Length W/O battery - Battery 25g

- Longer Drop – The Tellis is now available in 200mm drop so riders can benefit from the ability to further drop their saddle. This allows for more free movement on the bike when the trails get steep, fast or technical - The same proven & trusted design, now in a longer 200mm drop length - Internal Routed, Infinitely Adjustable Design - Simplistic—Fully Sealed Alloy Cage / Stainless Tip Cartridge System - Durable 3D Forged Head—With 7075-T6 Forged Clamp - Intelligent Keyway System—Ensures Minimal Play - Easiest Installation—Cable Head Attaches At Base - Cold Weather Approved—Tested Down To -20C - Featherlight Lever Thumb Actuation—Industry Leading - 282mm insertion length - 1x Lever included—With Premium Jagwire Lex Slick Housing, Stainless Cable and Hardware

- Internal Routed, Infinitely Adjustable Design - Simplistic - Fully Sealed Alloy Cage / Stainless Tip Cartridge System - Durable 3D Forged Head - With 7075-T6 Forged Clamp - Featherlight Thumb Actuation - Industry Leading - Intelligent Keyway System - Ensures Minimal Play - Easiest Installation - Cable Head Attaches At Base - Cold Weather Approved - Tested Down To -20C. - 1x Lever included - With Premium Jagwire Lex Slick Housing, Stainless Cable and Hardware

Our intention with Reverb AXS was inventive and pure: No hoses. No routing. No energy wasted. Not a single thing in the way of the experience. We created a reliable wireless-electronic dropper post and controller that actuates with drastically less effort and zero distraction. Expanding what's possible on a bike, Reverb AXS is enabled by SRAM AXS technology, a new level of interaction, personalization, and connectivity across all AXS-enabled components. - Effortless Electronic-Wireless actuation and infinite height adjustment with a single touch. - Clean, simple and fast to install. No hoses to route, no fishing required. - Updated internals for faster return speed in all conditions. - New Vent Valve Technology, a simple and reliable built in service solution without disassembly of the seatpost. - SRAM AXS technology, a new level of interaction, personalization, and connectivity across all AXS-enabled components. - Includes RockShox AXS handlebar controller, rechargeable SRAM battery, and charger.

The Reverb Stealth features Vent Valve Technology for super simple service if the need arises. Redesigned internals provide effortless actuation and increased reliability. With reduced overall post lengths and new travel options, riders of all shapes and sizes benefit from more travel than ever before. The new Reverb Stealth redefines what it means to simply go up and down. - Shorter overall post length - Stealth Internal cable routing

The proven 2-bolt design on this classic provides a class-leading balance between strength, weight, and adjustability. The two-bolt design is easy to adjust and holds tight. Its low profile clamp reduces stress on lightweight rails and won't bottom out, and the bolts are oriented to the axis of the rails for the greatest contact area with the saddle. The Classic also features Ritchey's 'Classic' high-polish silver finish. - Material: 2014 alloy - Total length: 350mm (including 100mm of minimum insert) - Saddle clamp: standard - Saddle clamp torque: 13Nm (max) - Seat collar torque: not specified - follow frame/seat binder specification - Weight: 260g (27.2x350mm) - Color: high-polish silver

Now available with the iconic high-polish silver finish, the Ritchey Classic Zero seatpost features the same Zero post head and zero setback as the original Zero post. Inspired by life, built to last, and providing a classy aesthetic, the Classic Zero offers no-slip saddle engagement and high adjustability by securing the rails with fore and aft bolts. Whether you're cruising along rough gravel roads, remounting after running a section of slop on the 'cross course, ripping some sublime singletrack, or out on an epic road ride, the Classic Zero seatpost keeps your saddle exactly where you want it. - Material: 6061 alloy - Offset: zero - Saddle clamp: 2-bolt fore/aft - Saddle clamp torque: 7Nm (max) - Seat collar torque: not specified for seatpost—follow frame/seat binder specification - Weight: 290g (27.2 x 400mm)

Proven 2-bolt design provides a class-leading balance between strength, weight, and easy adjustability. Low-profile clamp reduces stress on lightweight rails and won't bottom out. - Material: 6061 alloy - Saddle clamp: standard - Saddle clamp torque: 13Nm (max) - Seat collar torque: not specified - follow frame/seat binder specification