Filter By:

Powertap

PowerTap P1 Pedals
$799.99
These aren't ordinary pedals. The P1 pedal is a simple, intelligent and uncompromising design that provides the same proven PowerTap accuracy and reliability. The simple one-piece design easily mounts to any crank and does not require calibration nor installation angle setting, providing a true “plug-and-play” experience. The P1 also features dual band ANT+ and Bluetooth SMART for compatibility with a multitude of head units and smart devices. Plus, the independent measurement opens the possibility for a new set of pedaling metrics previously unavailable to help give you the ultimate competitive edge.
PowerTap G3 Rear Hub
$789.99
Some equipment makes your bike faster. Some makes you faster! PowerTap’s proven, 325-gram PowerTap G3 Hub does both. Make the most of your time on the bike — nail your intervals, stay within your targeted zones for long rides, and track your Training Stress Score (TSS) and Chronic Training Load (CTL) for long-term gains and reaching your goals. The low-profile G3 hub is made of light, durable aluminum with wide flange spacing for a great wheel. The G3 is accurate to within +/-1.5%, and is ANT+ capable for use with your favorite compatible cycling computer (sold separately). Plus, all the electronics are held within a small, easily removed outer cap.
PowerTap Bluetooth Smart Dual Speed/Cadence Sensor
$44.99
PowerTap's Bluetooth Smart Dual Speed/Cadence Sensor gives you the ability to monitor your speed and cadence with your favorite Bluetooth-compatible device. It's sleek and easy to mount on your frame.
PowerTap 15mm Aluminum Freehub Body Kit (10-Speed)
$39.99
PowerTap’s 15mm Aluminum Freehub Body Kit is constructed of stiff, light aluminum and steel, and rolls on durable steel bearings. This is the correct replacement freehub for your PowerTap 10-speed wheel.
PowerTap Joule/Joule GPS/Joule GPS+ Stem Or Handlebar Mount
$4.99
- Mount kit for Joule, Joule GPS or Joule GPS+. - Can be configured for mounting on handlebars or stem.
PowerTap PowerCal Dual ANT+/BLE
$69.99
The PowerCal is the world’s first-ever power meter calculated from heart rate. At the time of its release, it was an incredible innovation combining two important training metrics: heart rate and power. And after all these years, the PowerCal remains as one of Powertap's most popular products, and for good reason—athletes of all kinds trust it ride after ride. - First-ever power meter calculated from heart rate. - Most affordable way to begin power training. - Bluetooth Smart or ANT+ compatible. - Signal Transmission: Bluetooth Smart (Cycling Power Service, Heart Rate Service, Device Info Service) or ANT+ (2.4 GHz) - Operational Temperature: 0-40C/32-103F - Battery Type: CR2032 - Battery Life: 400 Operational Hours (Bluetooth); 600 Operational Hours (ANT+) - The PowerCal is not a waterproof device and should not be submerged in water - PowerCal BLE is compatible exclusively with the PowerTap mobile application on iPhone 4S or higher. - PowerCal ANT+ is compatible with android and iPhone/iPad devices with use of appropriate ANT+ adapter key - PowerCal ANT+ is not compatible with cervos (little yellow computer) or older grey indoor cycle consoles.
PowerTap Single-Sided Pedals
$529.99
Built to be just as robust and just as precise as its world-renowned sibling, the PowerTap Single-Sided Pedal has all the innovation of the P1 pedals – at a fraction of the price. Named for its single-sided nature, the PowerTap Single-Sided Pedal doubles the watts produced by the left pedal to calculate total power. The PowerTap Single-Sided Pedal also touts the same plug-and-play installation, easy-to-swap, cross-bike compatibility, along with dual-band ANT+ and Bluetooth as its bi-lateral counterpart. Ideal for the bike enthusiast, the weekend warrior or the power-training curious, there is no better way to get started with accurate pedal-based power than the PowerTap Single-Sided Pedal. - Weight: 390 grams per pair of pedals (without batteries) - Thread Type: 9/16" - Cleat Interface: 3 bolt - Cleat: Red, 6 degree floating - Spring Type: Adjustable Elastomer - Proven PowerTap accuracy - Release Tension: 6-20 Nm - Stack Height: 14mm - Center of Pedal: 53mm (measured from crank to pedal) - Lean Angle: 25.5 degrees (based on 175mm crank length, 75mm BB drop and 147mm Q-Factor crank) - Firmware Updates: Over the air - Connectivity: ANT+ and Bluetooth SMART - Battery: AAA Lithium (alkaline and/or rechargeable alkaline batteries not recommended for extended use) - Battery Life: 60 hours - No weight limit - PowerTap Single-Sided Pedals are not capable of providing advanced pedal metric data. In order to display advanced pedal metric data you must be using dual-sided P1 pedals.
PowerTap Power Pedal Cleats
$11.99
Power Pedal Cleats cleats work with PowerTap P1 Pedals (sold separately)
PowerTap C1 Chainring No Sensor
$199.99
Replacement Chainrings for PowerTap C1 power measuring systems - 5 bolt, 110 BCD compact design - Must replace with same chainring combination to measure correctly - Note: when replacing PowerTap C-1 chainrings, you must replace with the same range or sensor will have to be sent back to PowerTap for recalibration - This kit does not include a sensor - Ring Position/Type: Outer , Inner - Drivetrain Speeds: 11 - Color: Black - Material: Aluminum
PowerTap Magnetless Speed Or Cadence Sensor
$29.99
Powertap's low-profile speed or cadence sensor harnesses the advances in accelerometer technology to leave the magnet in the dust along with your competition. - Can be programmed for speed or cadence. - Easily attaches to crank arm or hub. - Dual-band Bluetooth Smart and ANT+ compatibility. - Low-profile design with no magnet required.
PowerTap 15mm Aluminum Freehub Body Kit (11-Speed)
$39.99
PowerTap’s 15mm Aluminum Freehub Body Kit is constructed of stiff, light aluminum and steel, and rolls on fine bearings. This is the correct replacement freehub for your PowerTap 11-speed wheel.
PowerTap G3 Hub Cap Removal Tool
$9.99
- Allows rider to update firmware in G3 PowerCap. - Allows rider to change the hub’s CR2032 battery. - Used for the removal of the G3 PowerCap. - Removes the G3 PowerTap cap to update the firmware or change the hub’s CR2032 battery.
PowerTap Joule 2.0 Standard Mount
$11.99
- Mount kit for Joule 2.0 - Can be configured for mounting on handlebars or stems
PowerTap Handlebar/Stem Mount for Yellow Cervo CPU
$9.99
CPU mount for use with wireless yellow Cervo PowerTap computers.
Page 1 of 1