$0.80 - $1.60 $5.90 - $9.90 Up To 84% Savings
- Front Cover Plate kit (left) - Cable hatch logo plate (left)
Don't let a bent or worn dust cap sully an otherwise well-functioning Shimano Alfine internally geared hub. Get a spare and replace as necessary for continued performance and to preserve the longevity that you expect from Alfine.
$1.00 - $12.00
- Hoods with (FD) are Flight-Deck compatible
This is a replacement Brake Hose Cover for the Lever End of Shimano BH90-SBM, BH90-SB levers. - Covers brake hose fitting at the brake lever
Keeping that well-functioning Shimano Alfine internally geared hub in top working condition means keeping the internals clean. Replace the left hub seal ring when necessary for continued performance and to preserve the longevity that you expect from Alfine.
Shimano Mountain Deore XT M8000 Shift Pod Cable Adjusting Unit
Shimano E-tube Dummy Plugs - Extra E-Tube plugs for sealing unused ports on shifters or junction boxes - Sold each
Shimano Front Derailleur Cable Fixing Assembly
- Replacement barrel adjuster for 105 5800 brakes
Need a Shift Cable Fixing Bolt Unit for your Alfine S7000/S700 hub? Here it is. Now, get that bike back on the road!
Do you need to replace the right lock washer seal on your Alfine SG-S700 internally geared hub? If you're not sure, it might not be a bad idea, as contamination from damaged or worn seals is the kryptonite of virtually maintenance-free internally geared hubs.
Shimano Rear Derailleur Cable Anchor Assembly - Fits SLX M7000-10
Keeping contamination out of your internally geared hub is critical to its function and longevity. Sometimes, the oil port bolt comes loose and it's easy to lose, even if you've just taken it out to oil your hub. Keep a spare or two so your hub stays clean inside and it'll last you many, many miles.
Shimano Cassette Spacers.
Shimano Dura-Ace R9100 Cassette Spacers
Keep the cable fixed securely in your Dura-Ace R9100 rear derailleur with this Shimano Rear Derailleur Cable Anchor Assembly
Keep the cable fixed securely in your XTR M9000 rear derailleur with this Shimano Rear Derailleur Cable Anchor Assembly
Need a spare Shimano cable adjuster assembly for your Dura-Ace R9100 rear derailleur? You've found it. Making sure this part is in working order can mean the difference between a two-second barrel twist to return your shifting to perfect, or getting out the multi-tool to readjust the cable again and again until it's close enough to get home. Your choice.
Shimano Replacement pads for Mountain brake shoes - Color: Black - Intended Brake Type: Linear Pull - Pad Attachment Style: Threaded Post - Pad Type: Replacement Insert - Cartridge - Rim Compatibility: Standard - Shimano Cartridge-type mountain brake pads fit models: XTR BR-M970, BR-M960, BR-M951, BR-M950 XT BR-T780, BR-M770, BR-M760, BR-M750, BR-M739, BR-M737 LX BR-T670, BR-M580, BR-M570 Deore BR-M530, BR-M510 Alivio BR-M430, BR-MC18 Acera BR-M422, BR-M421, BR-M420, BR-M330, BR-T300 DXR BR-MX70 MX BR-M600 - M70R2: Severe condition brake pad, high performance in dry or wet conditions
Shimano Wiring Plug Tool for use with Di2 - Tool is required to assist Di2 shifter plug installation - Shimano TL-EW02 tool for connecting and disconnecting the Di2 wiring harness and shifter plugs - For use with Dura-Ace 9070, Ultegra 6870/6770 and Alfine Di2 components and E-Tube wiring
New cones make hubs spin like silk. Take advantage of your Shimano Alfine hub's highly serviceable design, and replace the bearing cones if they are worn or damaged. This one is specifically for the right side.
This is a replacement hardware kit for Dura-Ace FD-R9100 Front Derailleurs. It includes support bolt and plates.
Shimano Replacement pads for Mountain brake shoes - Shimano Cartridge-type mountain brake pads fit models: XTR BR-M970, BR-M960, BR-M951, BR-M950 XT BR-T780, BR-M770, BR-M760, BR-M750, BR-M739, BR-M737 LX BR-T670, BR-M580, BR-M570 Deore BR-M530, BR-M510 Alivio BR-M430, BR-MC18 Acera BR-M422, BR-M421, BR-M420, BR-M330, BR-T300 DXR BR-MX70 MX BR-M600 - M70CT4: Only for sidewall-machined rims; performs especially well in wet conditions and may pass DIN standard; tends to be low noise, low rim wear and fade - Color: Black - Intended Brake Type: Linear Pull - Pad Attachment Style: Threaded Post - Pad Type: Replacement Insert - Cartridge - Rim Compatibility: Standard
This replacement Shimano bar-end shifter segment unit is the expansion core that goes inside the handlebar. These can become damaged in a crash or during installation or uninstallation.
Shimano Tiagra 4700 Right STI Lever Name Plate and Fixing Screw
$8.00 - $17.00
Shimano Deore XT M8000-GS Rear Derailleur Cage Plate
$8.00 - $12.00
- Replacement plate for M7000-GS rear derailleur - Choose Inner or Outer
- Wet or muddy condition cable sealing solution
This outer receiver unit works with the CJ-S700 Cassette Joint Unit for Shimano Alfine SG-S700 internally geared hub. This part can become worn, cracked, or torn, exposing the shift cable and possibly other components to unwanted dirt, water, mud, you name it. You don't want that.
$9.00 - $18.00
These are replacement Shimano Rear Derailleur Cage Plates for Deore XT RD-M8000-SGS derailleurs. If these plates are bent or damaged, shifting performance deteriorates significantly leading to skipping chains, mis-shifts, and ghost shifting. Restore the smooth, precise shifting you've come to expect from your XT derailleur. *Be sure to choose the correct plate if you only need the inner or the outer plate.
Page 1 of 24 Next page