Set of 8 SKS stainless fender drawbolt/nuts
Stay clean and dry with SKS's Commuter II fenders! The stainless-steel hardware comes pre-installed for quick and easy mounting.
Stay clean and dry with SKS's Velo 65 Mountain fenders! The universal mounting system easily attaches to a wide range of frames for total coverage from road spray. These fenders fit tires from 37 to 62mm wide and are designed to work with either 26-inch or 29-inch wheels.
This super lightweight (45g) and discreet mudguard protects your face from mud and water. Made of super soft material it fits to 26", 27.5" and 29" bikes and is compatible with most forks. The Flapguard Mudguard sticks close to your bike even in extremely aggressive riding due to the supplied zip ties, which wrap around the fork bridge and fork legs. Mud is also kept off your fork seals. Also compatible on rear side of frame.
The X-Board is an innovative clip-on fender with rubber fasteners for downtube mounting. - Adjustable soft rubber cable-spacers, ideal to adapt on almost any tube profile - Robust rubber fasteners - Dual compound-softspoiler
SKS Raceblade Long Hardware Kit compatible with 2014 and prior models.
The Shockblade 27.5+/29-inch is a clip-on front, high-quality 2-component fender for mounting on the fork of 27.5+ and 29-inch mountain and trekking bikes. - Virtually unbreakable high quality dual compound plastic - Hidden chuck cone adapter which is fitted once during first assembly - Easy quick-release fastening - Optimized dirt protection - Fits almost all suspension forks - 27.5+ and 29-inch wheel compatible
Replacement SKS Rubber Straps for RacebladePro and S-Board
The S-Guard is a lightweight, injection molded seat mounted fender for mountain or road use. Fast to fit, the S-Guard can also be zip-tied onto the saddle rails for extra security (zip tie is not included). Made of super soft material it fits nearly every saddle. - Mounts to saddle rails via cutouts that can be supplemented with zip ties - Appropriate for both mountain and road use - Made in Germany - 24g
This innovative fender provides optimal protection for tapered suspension forks. The Shockboard Vario is easily mounted on the fork crown in seconds with the use of high quality rubber straps. The angle of the rear part of the Shockboard Vario fender can be adapted to the geometry of your wheel. The form is based on the SKS Shockboard and Shockblade and makes full use of the splash guard effect that has been proven for decades. - Mounts to fork crown via high quality rubber straps - The rear portion of the fender can be adjusted to various wheel sizes - Provides a solution for mounting a fender to tapered steerer suspension forks
Bag of 3 replacement washers for EVA heads on all SKS floor pumps
The X-Blade 27.5+/29-inch is a high-quality 2-component clip-on fender for the rear wheel of a 27.5+/29-inch mountain and trekking bikes. Due to the quick-release mounting, the fender can be fitted to almost any seat post and optimally adjusted to the wheel using the 2-joint technology. - High performance dual compound plastic - Easy quick-release-fastening by pre-adjusted powerstrap - 2 joints for optimized adjustment to all frames - Optimized dirt protection - 27.5+ and 29-inch wheel compatible
The Velo 65 Mountain 29 is an ideal front and rear fender retro fit kit for 29" mountain bikes. Its practical universal mount makes it easy to securely attach to a wide range of bikes. The included U-stay kit provides fender stability. Suitable for tire widths up to 2.35". - Features a safety release on the stay mount
The TL-Head Set pump head is a new solution from SKS for all tubeless tire inflation. It is compatible with SKS floor pumps and all others with a 5.0-5.7mm hose size. The TL-Head Set can be used both for conventional pumping and with CO2 cartridges for a simple seating of tubeless tires. It comes in a practical set containing 2 tire levers and 2 16g CO2 cartridges. - Includes TL-Head, two 216g threaded cartridges and two tire levers - Compatible with Presta, Schrader and Dunlop valves
The Shockblade 26/27.5-inch is a clip on front, high-quality 2-component fender for mounting on the fork of 26-inch and 27.5-inch mountain and trekking bikes. - Virtually unbreakable high quality dual compound plastic - Hidden chuck cone adapter which is fitted once during first assembly - Easy quick-release fastening - Optimized dirt protection - Fits almost all suspension forks - 26-inch and 27.5-inch wheel compatible
The X-Blade 26/27.5-inch is a high-quality 2-component fender for the rear wheel of mountain and trekking bikes. Due to the quick-release mounting, the fender can be fitted to almost any seat post and optimally adjusted to the wheel using the 2-joint technology. - High performance dual compound plastic - Easy quick-release-fastening by pre-adjusted powerstrap - 2 joints for optimized adjustment to all frames - Optimized dirt protection - 26-inch and 27.5-inch wheel compatible
Easily adapts schrader only air compressors, floor pumps, and mini pumps to work with presta valves
The new SpaceCage is not only a bottle cage, it also features storage. The storage compartment is easily secured in place with a bayonet catch. You can use the compartment to carry your repair kit, keys or change. The bottle cage is made of light but high strength plastic and is equipped with the an adjustable nose to adapt the cage for different bottle sizes. - Storage compartment below the bottle cage - High strength plastic construction - Adjustable nose adapts the cage to different bottle sizes
Front and Rear SKS V-Brace Fender Stay Set with Drawbolts
8 sets of SKS Breakaway Mount Eyebolt and Nut Set
The X-Guard is a universal downtube fender for any wheel size. It is attached using two straps on the lower bar (downtube), making it compatible with fat bikes and bicycles with oversized tires for all-around mud protection. It also protects E-MTB batteries from dirt, splashes and flying rocks. The straps are extra long and can be shortened as needed, making X-Guard suitable for any frame shape and all common battery models.
Designed specifically for commuters, this 45mm wide front and rear fender set is the perfect option for the every day rider. The reflective strips that run down either side of the fenders provides enhanced visibility. - Sturdy stainless steel double stays - Easily mounted with included hardware
This ultra long clip-on mudguard set for road bike tires (up to max. 25mm width) protects you, whether you’re riding your road bike in a warm summer rain or on solitary winter trips. The end of each mudguard extends to below the hub axles. This length ensures a full coverage, meaning you, and also the cyclist behind you, are spared from splashing. They can be perfectly adapted to the radius of the wheel by adjusting the length of the stays. Once the metal mounting brackets are fitted to the bicycle, the mudguards can be clipped on and off in seconds making them ideal for use as needed. Brackets attach at brake bolts and skewers. - End of each fender extends to below the hub axles - Length ensures full coverage for the user and those riding in proximity - Can be adapted to the radius of the wheel by adjusting the length of the stays
Cannondale Headshok Adaptor for the SKS Shockboard Fender
The SKS RideAir is the first refillable air tank from SKS for when you are on the road. It can be used in place of a pump or C02 cartridges emergency tire repairs. The RideAir effortlessly fills your tires in seconds. Simply refill the canister at home using your floor pump. This simple and environmentally friendly solution can be safely transported in your bottle cage. The RideAir is also a must have for tubeless tire riders: it saves space and sets up almost all tubeless tires. - Fits in a standard water bottle cage - Fills from an air compressor or high pressure pump via a Schrader valve - For tire inflation, fits to Presta, Schrader or Dunlop valves - Integrated canister pressure gauge
End wet feet forever! SKS Longboard are one of the longest and best coverage fenders on the planet. They feature stainless-steel hardware and SKS's security clips for durability and safety. - 700c x 38–45
Get classic full-fender protection from SKS's P35 Chromoplastic fenders! They feature stainless-steel hardware and SKS's security clips for durability and safety.
Using the same technology of the SlideCage but for front bottle insertion and featuring a bottle size adjustment nose the Topcage delivers great performance and fits to all plastic drinking bottles.
Secu clip for V Stays - set of 2
Addd an extra dose of stability to SKS's Velo 42 and Velo 47 fenders. A stainless steel U-stay mounts to the fenders and your frame eyelets to eliminate rattling and bouncing fenders.
Page 1 of 5 Next page