Lighting

- Supplies full wheel illumination for 700c/29in wheels and smaller - Approximately 40 hrs of battery life - Water resistant design - Includes 3 (AA) batteries - Sold individually (1 wheel) - Easy to install

Planet Bike's BRT Strap is a small item that provides big visibility. This versatile LED safety band can be used as an arm band, pants keeper, dog collar and anything else you can think of. An included lithium battery provides over 200 hours of run time in either flashing or steady mode.

Make sure you have excellent rear visibility at night with the Blinky 3. This sweet taillight aims 3 bright LEDs directionally to provide visibility from up to a mile away. Its soft-touch power switch accesses flashing or steady modes for up to 100 hours of run time on the 2 AAA batteries (included). And, it includes seatpost and seatstay mounts.

Cage mounted amber side light Be seen from the side when you’re on the go with the Bottle Blinky. It mounts discreetly under your waterbottle cage but provides dynamic side visibility in three flavors: steady, Courtesy pulse and Superflash. - 6 high output surface mounted amber LEDs provide steady, Courtesy & Superflash modes - FL1 Tested - Run times: 24 hrs (steady – 7 lm), 27 hrs (Courtesy – 3-7 lm) and 106 hrs (Superflash – 7 lm) - Amber side lights provide 150° of side visibility on each flank - Highly visible, even in daylight - Dust & water resistance rated to IP64 standard - 2 AAA batteries (included) - Mounts to water bottle mounts on downtubes and seat tubes - 58 grams

- Mounts Beamer and Blaze 1/2W lights to a helmet - Compatible with Beamer 1, Beamer 3, Beamer 5, Blaze 1/2W and Blaze 2W Micro, Blaze 140 SL, Blaze 180 USB - Increased weight and length of Blaze 300, 500, and 650 USB lights may cause awkward mounting on helmet

- Fits 25.4-31.8mm handlebars - Compatible with Blaze, Beamers, 1200, 5000x and Super Spot

- Attaches to rear racks - Compatible with: Blinky 3,5,7 and Superflash - 25mm between each of the top horizontal holes (center to center) - Requires an "L bracket" that typically comes with a rear rack. If your rack is missing the L bracket, you can purchase Planet Bike's rack hardware pack

Maximize your visibility with this amazing taillight. Planet Bike's Superflash aims a one-watt Power LED plus two red LEDs for light that can be seen for up to one mile! The ultra-compact case is weatherproof, light and durable. And, the Superflash Turbo includes a bike mount and clip mount for multiple mounting options. Plus, the 2 AAA batteries (included) offer run times up to 100 hours.

- Fits seatpost (up to 31.8mm) or seatstay - Compatible with: Blinky 3,5,7, all Superflash lights and Blinky Safety rear light - Use with Blinky Safety Front light bracket to fit oversize (~31.8mm) handlebars

The NiteRider Adjustable Angle Tail Light Strap Mount was specifically designed for our flagship tail light, the Sentinel. It allows you to fine-tune the mounting angle of the light to display the projected Laser Lanes even and parallel on the ground. It's an easy on and off non-slip tail light mount that also features a grooved contact pad that makes this the 'go to' mount for riders using aero seat posts. System Compatibility - Sentinel - Solas - Sabre - CherryBomb

The Garmin XL Combo mount by K-Edge is the next generation of industry-leading Garmin Computer Mounts—stronger, easier, more versatile, and more stylish design to complement your Garmin and your bike. The ultimate upgrade for your Garmin computer and GoPro compatible cameras & lights, specifically designed to accommodate the EDGE 1030, 1000, 810 and 800, also compatible with the smaller Edge models like 520, 510, 500, in addition to the Forerunner and Touring models. The K-Edge advanced co-polymer Garmin insert locks your computer in place with strength and security. Designed and tested extensively so that our replaceable insert breaks away instead of your computer tabs in the event of a crash or mishap. K-EDGE provides free replacement inserts, as needed. Compatibility - All Lumina Series lights equipped with K-Edge GoPro Adapter (sold separately). - Supported Computers: Garmin Edge 1030, 1000, 810, 800. Also compatible with new Garmin Edge 520, Edge 20 and Edge 25 models, in addition to Forerunner and Touring models. - Camera Interface: GoPro style interface for compatible action cameras or lights - Includes Garmin Pro XL Combo Mount and mounting hardware - CNC Machined 6061 T6 Aluminum - Fits 31.8mm handlebars - New clamp design is hinged for ease of installation - Weight: 64g - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects (damages due to abuse or crashing excluded) - Note: Assembly bolts not meant to be removed or tampered with at any time.

The NiteRider Lumina Handlebar Strap Mount offers a wide variety of handlebar size fitments and remains rock solid while riding through rough terrain. It’s easy to install and, like all NiteRider mounts, features a quick release tab for when it’s time to recharge or leave your bike unattended. System Compatibility: - Lumina Series - Mako Series - MiNewt Cordless Series

Increase your line of sight with the NiteRider Lumina Helmet Mount. By mounting your head light onto your helmet, it’ll allow you to see farther into your turn or wherever your head turns. System Compatibility: - Lumina Series - MiNewt Mini Series - Mako Series

Big things come in small packages and the NiteRider Lumina Micro 650 is the proof. The Lumina Micro 650 delivers a powerful punch with 650 lumens of light output, helping you to safely navigate your ride. Allowing you to see and be seen. As with all Luminas in the series, it features a low battery indicator – when the power button changes from blue to red color this indicates that there is approximately 15-20% battery life remaining. - All New Collimator Lens, produces a generous even widespread beam - Daylight Visible 650 lumen output head light - CREE LED at 6000k - Ride safely with Daylight Flash Mode! - 4 Light Levels plus 1 Daylight Flash Mode - FL1 Standard IP64, dust and water-resistant - Secure on and off-road capable Handlebar Mount - Fits standard and oversize 35mm handlebars - Compact and lightweight design that's perfect for helmet mounting (Helmet Mount Sold Separately) - Convenient USB rechargeable - Low battery indicator - Lock Mode, perfect for use during storage and transporting the light. Press and hold power button for 7 seconds to lock out operation of light. WARRANTY - The Lumina Micro 650 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Light Head - Internal Li-Ion Battery - Handlebar Mount fits up to 35mm - USB Charging Cable

Looking for our best selling Lumina series in a smaller and lighter package? Look no further than our Micro 900. NiteRider makes this headlight USB rechargeable for convenient on-the-go charging. Another feature of note on the 900, Intellicharge, which reduces your charge time in half—giving you more time riding and less time waiting. Its light weight at 130 grams makes it quite suitable as a helmet mountable option as well as bar compatible—standard and oversized 35mm diameters. - 900 lumen output - All New Collimator Lens, produces a generous even widespread beam - 4 Light Levels plus 1 Daylight Flash Mode - FL1 Standard IP64, dust and water-resistant - High output light using a CREE LED at 6000k - Ultra lightweight 900 lumen head light, weighing in at only 130g including mount - Secure on and off-road handlebar mount - Fits standard and oversize 35mm handlebars - Small compact design that’s perfect for helmet mounting (Helmet Mount Sold Separately) - Convenient USB rechargeable - Low battery indicator - Lock Mode, perfect for use during storage and transporting the light. Press and hold power button for 8-10 seconds to lock out operation of light. USB RECHARGEABLE The Lumina Micro 900 is USB Rechargeable. Another feature of note on the 900, Intellicharge, which reduces your charge time in half—giving you more time riding and less time waiting. Charge time is 2:30 hours, when plugged into a power source outputting over 500 mA and 4:30 hours when below 500 mA. MOUNTING OPTIONS Its compact profile and high light output make the Lumina Micro 900 ideal for helmet mounted applications, helmet mount available as an optional accessory. Or use handheld in Walk Mode for an amazing 60:00 hours run time. WHAT'S INCLUDED? - LED Light Head - Internal Li-Ion Battery - Handlebar Mount fit up to 35mm - USB Charging Cable

The NiteRider Lumina OLED 1200 Boost is an innovative bike light that removes the guesswork related to battery life, allowing you to plan your next ride safely with complete confidence, day or night. The OLED multifunctional digital display screen delivers precise battery run times as a percentage and actual time for the Lumina OLED's 9 lighting levels. The Lumina OLED 1200 Boost features a custom engineered collimator sense, producing a generous widespread beam pattern. With Boost Mode providing a stunning 1200 lumens of maximum light output, this makes the Lumina OLED highly capable for use when navigating through diverse riding conditions. - New Collimator Lens, distributes a generous even widespread beam - Boost Mode! Unleash maximum LED output - 5 Light Levels plus 4 Daylight Flash Modes - CREE LED at 6000k - Multifunctional OLED screen provides detailed operational information - FL1 Standard IP64, water resistant - Intellicharge – Reduce charge time in half! - Backlit buttons for easy to use interface in any lighting condition - Secure on and off-road capable handlebar mount - Fits standard and oversize 35mm handlebars - Convenient USB rechargeable WARRANTY - The Lumina OLED 1200 Boost is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Light Head with OLED Display - Internal Li-Ion Battery - Handlebar Mount fit up to 35mm - USB Charging Cable

The NiteRider Lumina Stick-On Mount is ideal for non-vented helmet mounting applications. Whether it be your favorite downhill/MX style helmet or explore the versatility of your Lumina head light by mounting it onto an industrial hard hat making it the ultimate work light! System Compatibility - Lumina Series - MiNewt Mini Series - Mako Series

If you're looking to mount your Lumina and Mako series lights to a GO Action Camera style mounting point, this is the accessory you've been looking for. The mounting point screws into the GO Action Camera style connection for a solid and secure fitment. System Compatibility - Lumina Series - Mako Series

Pro Series Low Profile Helmet Mount (Not for Lumina Series Lights) System Compatibility: - Pro Series - HID Series - Classic Plus & Select - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip -TrailRat & TrailRat Select - RoadRat - Digital Patrol - Pre 2001 Systems

The NiteRider Sentinel 250 is designed to increase cycling safety by way of 2 varying flash patterns and 2 steady beams (High/Group Ride Mode). Behind the durable red lens and casing are two powerful LEDs that emit 250 lumens in the brightest Daylight Visible Flash setting, allowing you to be seen day or night. For enhanced safety, the Laser Lane modes (3) are designed to project ultra-bright laser lines on the ground. This creates a virtual lane for the rider, further increasing visibility. - The Sentinel 250 complies with FDA standard for lasers, notice No. 50, 2007 - Daylight Visible Flash (DVF) - Highly visible laser lanes - All in one, Laser and tail light! - Convenient USB rechargeable - Group Ride Mode – be seen without distracting fellow cyclists - Easy on and off seat post strap mount with quick release tab - FL1 Standard IP64, dust and water-resistant WARRANTY - The Sentinel 250 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Tail Light w/ Laser Lanes - Seat post Mount - USB Cable

The NiteRider Swift 500 delivers everyday reliable performance in an economical ultra compact head light. Sporting features like an easy on and off handlebar strap mount, low battery indicator and to top it off, it's USB Rechargeable; making it the perfect light of choice for commuters and cycling enthusiasts. Although small in size, make no mistake; the Swift 500 packs a big punch with a maximum light output of 500 lumens! Powered by an internal Lithium Ion battery, in Walk Mode, the Swift 500 can run for up to twenty-five hours before it needs a charge. - Highly durable design made with fiberglass reinforced plastic - Smooth 500 lumen beam pattern in an ultra compact and lightweight design - Innovative Collimator Lens – optimizes your field of view - Built-in, easy on and off handlebar strap mount - 4 Light Levels plus 1 Daylight Flash Mode - Fuel Gauge / Battery Level Indicator - FL1 Standard IP64, dust and water-resistant - Convenient USB rechargeable WARRANTY - The Swift 500 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Light Head - Internal Li-Ion Battery - Build-in, Handlebar Mount - USB Charging Cable

The NiteRider Tail Light Rack Mount gives you the option to mount your tail light directly onto your rack-ready/-equipped bike via this rack mount accessory. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL

Lezyne's Go-Pro LED Adapter allows you to mount your Lezyne LED light to any standard Go-Pro mount. This makes it fast and easy to switch swap out your camera and headlight using the same mount.

- Front Modes include High Steady, Low Steady, DayTime Pulse, NightTime Pulse, and Economic Flash. - Rear Modes include High Flash, Low Steady, DayTime PULSE, NightTime Pulse and Economic Flash - Fully USB rechargeable: no batteries to buy or replace - Runtime up to 15 hours for front and 7.5 hours for rear - Memory function: light turns on at the last mode it was turned off - Power saving function: 10% power or less, lights will automatically switch to lowest lumen output - Built-in battery indicators: RED = less than 25%, GREEN = fully charged - Multiple Mounting Options: vertical or horizontal mounting options as well as a clip for mounting to packs, bags or belts

The Plug is a light that harkens back to Knog's roots, using an overmolded soft touch TPU in three fun colors. Kicking out 250 lumens, this light is packed with fresh technology like a low battery indicator, cut-outs in the front light body for improved side visibility, and like all Knog bike lights, it is fully USB rechargeable. Designed to work with all genres of bicycles from commuters to road bikes, the Plug comes with two silicone bands for securing it to handlebars (22-27mm & 27-32mm). The Plug is a light for every-day, for every ride, for everybody. Increased Side Visibility Cutouts in the side of the Plug design result in improved side visibility. Given the fact that 78% of accidents happen with cars not seeing bikes at intersections, any additional visibility from the side can only be a good thing. USB Rechargeable As with all of Knog's bike lights the Plug is 100% rechargeable. Recharging is achieved via the micro USB port conveniently located behind the large rear button. Using a micro USB cable (not supplied) you can simply recharge off any USB port. Easy One Button Operation A large, soft-touch button ensures easy operation of the Plug. The Plug's oversized button allows the user to turn the light on and off with ease, even when wearing gloves. Low Battery Indicator Don't be caught out with an uncharged bike light again. With the Plug's clever side visibility window doubling up as a low battery indicator, you'll know when exactly when your light needs recharging. - Dimensions: H: 43mm x W: 33mm x L: 75mm - Weight: 65g - Charge Time: 2.5 hours - Lumens: 250

NiteRider Adapter sold separately from K-EDGE “Combo Mount”. Precision Machined 6061-T6 Aluminum Anodized Gunmetal Converts a NiteRider Rail Interface to adapt K-Edge GoPro Mounting Interface Enables compatibility with K-Edge GoBig Mounts and Combo Mounts 2x M4 Mounting bolts with Nylok included Compatible with Lumina Series, Mako Series Weight: 11.5 grams

Seat Post Mount Kit for Varia RCT715

- Powerful COB 50 chip LED - Micro-USB charging cable included - Weather-tough water resistant design - Flashing low battery indicator - Dual orientation universal rubber bracket

- COB bright 10 chip LED - Micro-USB charging cable included - Weather-tough water resistant design - Flashing low battery indicator - Dual orientation universal rubber bracket

Put it on your seatpost, put it on your seatstay, put it anywhere—Sunlite's Griplite goes everywhere. This powerful little light boasts two LEDs and runs for a whopping 100 hours! It has steady and two flashing modes, and is housed in a water-resistant body.

Others out on the roads and paths will see you when Sunlite's TL-L340 Taillight is on your bike. It sports 3 bright LEDs, steady and flashing modes, and a long run time.

- Simplistic safety light designed to be seen - Easy to install silicone strap attachment is compatible with 22.2-31.8mm bars - 3 modes including 1 steady and 2 flashing modes - Powered by 2 CR2032 batteries - Lumens: 12

- Simplistic safety light designed to be seen - Easy to install silicone strap attachment is compatible with 22.2-31.8mm bars - 3 modes including 1 steady and 2 flashing modes - Powered by 2 CR2032 batteries - Lumens: 6

Put it on your handlebars, put it on your fork leg, put it anywhere—Sunlite's Griplite goes everywhere! This powerful little light has 2 LEDs and runs for a whopping 100 hours! It has steady and flashing modes and is housed in a water-resistant body.

• 2 bright Nichia LEDs • Uses 2 CR 2032 lithium batteries (included) • 100 hour run time • 3 modes: 2 flashing and 1 steady • Water-resistant silicone body

Sunlite's HL-K100 Headlight is a great light at a great price. It sports a super-bright Krypton bulb housed in a tough, water-resistant body so it's perfect for commuting year round. A no-tools-required quick-release handlebar mount is included, too.

• 2 bright Red LEDs • Includes 2 (CR 2032) lithium batteries • 100 hour run time • 3 mode (2 flashing modes & steady mode) • Water resistant silicone body

- Rack mount bracket only - Fits TL-L225 taillight

-Mounts easily to front racks with threaded M5 mounts -Allows for unobstructed light positioning -22.2mm clamping diameter

- Compatible with Blinky 3,5,7, Superflashes, Turbo, Turbo Minis Superflash Micros and Blinky Safety rear light - Designed specifically for aero seat posts - Adjustable light angle - Easy on/easy off design makes for quick mounting and removal

- Compatible with all Blaze headlights, Beamer 1/3/5, 1200, Dual Spot, and Bright Spot bike headlights - Fits 25.4 – 31.8mm handlebars

Compatible with Shiner and Shiner Back lights - Rubber pad with loop straps to quickly mount and remove light for recharging - 50mm bolt spacing to fit most rear racks

Mount your tail light to the reflector tab on the back of a rear cargo rack with this Rack Bracket from Portland Design Works. - Compatible with all PDW rear lights except the Asteroid and Fenderbot - Horizontal holes are 50mm apart to fit European rack standards - Vertical holes are 18mm apart to fit most reflector mounts

All of our head light mounts deliver rock solid mounting but for those that demand the most rigid set up, the NiteRider Lumina Handlebar Clamp Mount is here to deliver a high degree of performance and stability. Fits a max bar diameter of 35mm. SYSTEM COMPATIBILITY - Lumina Series - MiNewt Cordless Series - Mako Series WARRANTY - This NiteRider accessory is backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners)

If you're looking to mount your NiteRider PRO series lights to a GO Action Camera style mounting point, this is the accessory you've been looking for. The mounting point screws into the GO Action Camera style connection for a solid and secure fitment. SYSTEM COMPATIBILITY - PRO Series Not compatible with Lumina Pro lighting systems

The NiteRider Tail Light Mount – Seatstay and Seatpost is our classic seatpost mount design that gives riders the option to mount their tail light to their seat stay, using the included seat stay clamp. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL

The NiteRider Tail Light Strap Mount allows for quick installation and fitment on to standard seat posts. It features a quick release tab that allows you to remove just your tail light, leaving the strap mount installed on the seat post; ideal for when you leave your bike unattended or when it's time for a recharge. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL Not compatible with omega 300 and sentry aero 260 tail lights.

Mounting bracket for MSW front White Bat Headlight. - Includes 1 front mounting bracket

Replacement bracket for Pico and Tigermoth lights. - Includes 1 front bracket, 1 rear bracket, and 2 mounting straps

Mount the Nip light to an e-Bike that has the specialty Pro Max stem for accessories.

Light & Motion's Vis 180 Aero Post Pad lets you easily attach your Vis 180 taillight to the back of your aero seatpost so you can be fast and visible.

This mount is designed to securely attach your Light and Motion Vis 180 Micro taillight to your bicycle.

This mount securely attaches your Light and Motion Vis 180 Micro taillight to a standard rear bicycle rack (taillights and racks sold separately).

Strap Light & Motion's Vis 360 Spare Front Mount to your spare helmet and use your Vis 360 light no matter what lid you are wearing.

Strap Light & Motion's Vis 360 Spare Rear Mount to your spare helmet and use your Vis 360 light no matter what lid you are wearing.

Replacement rubber end plug for the Strip Drive Front, Strip Drive Rear or Strip Drive Pro Rear lights

Replacement rubber end plug for the Hecto Drive, Micro Drive or Mini Drive lights.

Replacement rubber end plug for the KTV Front, KTV Rear and KTV Pro Rear lights.

Lezyne's Composite Bar Mount is a hard mount made of a reinforced Composite Matrix cradle for a strong and secure attachment of the Mega Drive, Deca Drive, and XL LED lights to the handlebar. It is designed for 25.4 mm or 31.8 mm bars, with the cradle designed to pivot 15 degrees laterally to allow adjustment of the LED light beam angle and directing it where it is most needed. A large thumb screw secures the CM mount to the bar without need of tools, and can be tightened by hand or a 1mm hex key. Molded rubber shims add grip and fine-tune fitting to undersized bars. Composite Bar Mounts are sold in a kit with the Mega Drive, Deca Drive, or XL LED lights.

Mount your Cygolite bicycle headlight to a variety of GoPro compatible interfaces and third-party mounting options that are compatible with the GoPro interface. - Compatible with Ranger, Expilion, Metro, and Streak series - Includes adapter piece only